What firmware version are you using on Snom? I am using it on Polycom without any issues, however in the Fusion PBX IRC channel someone tried every Snom firmware version and it only work on 1 version. This is the dialplan FusionPBX uses. <extension name="valet_park" > <condition field="destination_number" expression="^(park\+)?(\*590[0-9])$" > <action application="set" data="valet_parking_timeout=300" /> <action application="set" data="valet_parking_orbit_exten=0" /> <action application="valet_park" data="park@${domain_name} $2" /> </condition> </extension> Thanks, Moishe Grunstein Tornado Computer Systems, Inc. 212.400.7650 888.IPPBX.US Service Request Email: support@nysolutions.com<mailto:support@nysolutions.com> Polycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified [cid:image001.jpg@01C72F94.9EE45D60]<http://www.nysolutions.com/> Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of fs Sent: Thursday, October 10, 2013 10:58 PM To: fs; FreeSWITCH Users Help Subject: Re: [Freeswitch-users] call park blf sorry, I forgot to paste in the settings in the dial plan <extension name="valet_park"> <condition field="destination_number" expression="^(park\+\d)$"> <action application="answer"/> <action application="valet_park" data="my_lot@myhome.pbx2net.ca<mailto:my_lot@myhome.pbx2net.ca> $1"/> </condition> </extension> I use park+{slot} to park calls using keys on snom and grandstream phones. The busy lamp field lights but goes out shortly after, about 5 seconds. However, the call is still on hold and can be picked up by pressing the illuminated light. When I do a sip trace, there is a notify message saying the park+{slot} has been terminated. Any ideals. Incidentally, all other BLF's work prefectly. Darcy Primrose
