We use snom version 8.7.3.10. The dial plan for snom is immediately below. You need one dial plan to park and one dial plan to unpark. The strange thing, this worked perfectly for about 1 month then it started dropping the blf for parked calls, not just on snom phones but also on grandstream. Might be tied to an upgrade we did on the freeswitch. we use FreeSWITCH Version 1.2.12+git~20130909T220327Z~07f2d94d9c (git 07f2d94 2013-09-09 22:03:27Z) <extension name="valet_park"> <condition field="destination_number" expression="^(park\+\d)$"> <action application="answer"/> <action application="set" data="valet_parking_timeout=300" /> <action application="set" data="valet_parking_orbit_exten=0" /> <action application="valet_park" data="my_lot@myhome.pbx2net.ca $1"/> </condition> </extension> <extension name="snom_valet_unpark"> <condition field="${sip_to_params}" expression="proto=park"/> <condition field="destination_number" expression="^(\d{1})$"> <action application="answer"/> <action application="valet_park" data="my_lot@myhome.pbx2net.ca park+$1"/> </condition> </extension> Darcy Primrose ----- Original Message ----- From: Moishe Grunstein To: FreeSWITCH Users Help Sent: Thursday, October 10, 2013 11:22 PM Subject: Re: [Freeswitch-users] call park blf What firmware version are you using on Snom? I am using it on Polycom without any issues, however in the Fusion PBX IRC channel someone tried every Snom firmware version and it only work on 1 version. This is the dialplan FusionPBX uses. <extension name="valet_park" > <condition field="destination_number" expression="^(park\+)?(\*590[0-9])$" > <action application="set" data="valet_parking_timeout=300" /> <action application="set" data="valet_parking_orbit_exten=0" /> <action application="valet_park" data="park@${domain_name} $2" /> </condition> </extension> Thanks, Moishe Grunstein Tornado Computer Systems, Inc. 212.400.7650 888.IPPBX.US Service Request Email: support@nysolutions.com Polycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of fs Sent: Thursday, October 10, 2013 10:58 PM To: fs; FreeSWITCH Users Help Subject: Re: [Freeswitch-users] call park blf sorry, I forgot to paste in the settings in the dial plan <extension name="valet_park"> <condition field="destination_number" expression="^(park\+\d)$"> <action application="answer"/> <action application="valet_park" data="my_lot@myhome.pbx2net.ca $1"/> </condition> </extension> I use park+{slot} to park calls using keys on snom and grandstream phones. The busy lamp field lights but goes out shortly after, about 5 seconds. However, the call is still on hold and can be picked up by pressing the illuminated light. When I do a sip trace, there is a notify message saying the park+{slot} has been terminated. Any ideals. Incidentally, all other BLF's work prefectly. Darcy Primrose ------------------------------------------------------------------------------ _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org ------------------------------------------------------------------------------ No virus found in this message. Checked by AVG - www.avg.com Version: 2014.0.4158 / Virus Database: 3609/6738 - Release Date: 10/10/13