Hi, On Thu, May 10, 2012 at 9:10 AM, Karsten Horsmann <khorsmann@gmail.com> wrote:
Btw. you can also buy an A102d with two PRI Ports. The "d" stands for echo-chancelation.
Or you get an Mediagateway like the Patton Inalp SmartNode 4960.
I would also recommend to use a SmartNode or PRI board with two ports. This way you can sync the internal (HiPath facing) port to the external (Telekom) port, which will help avoid all kinds of timing trouble. Some single port boards have proprietary interconnects to sync multiple boards of the same vendor, but by buying one card / gateway with two PRIs you can skip the complexity. Using a standalone mediagateway like the Patton also makes it possible to put your server wherever you like and not worry about cabling the PRIs to the rack. You can route calls to multiple servers (e.g. send calls to server2 if server1 is down etc.) and don't depend on the FreeSWITCH machines to be up and running for the HiPath to work. We're using this kind of migration setup quite often, starting with a "transparent" SmartNode looped in between PRI and "old" PBX, then gradually routing numbers to the SIP world. Gruß, Markus