Hi all, In my office we have a Hard PBX, with some 4 extensions. We also have sangoma A102 card.
From the Hard PBX, if 0 is pressed, it is setup in a way that it will go to outside world. I've connected that line to span2 of the card. The span2 in the A102 card, is configured as PRI_NET.
wanrouter status shows connected for the span2. But if I dial from the extension, I got the following in the sangoma_dchan log. 2010-04-03 12:49:49 INCOMING [ 00 01 54 50 08 02 01 64 05 04 03 80 90 a3 6c 0c 01 81 34 34 33 39 31 31 34 36 30 30 7d 02 91 81 ] Call Ref:0164 Type:Setup (0x5) Bearer Capability:Coding:ITU-T(0) TransferCap:Speech(0) TransferRate:64 Kbit/s(16) L1Prot:G.711 A-Law(3) Calling Party Number:4439114600(l:10) plan:isdn(1) type:unknown(0)scr:user, passed(1) pres:allowed(0) High-Layer Compatibility:Undecodedhex [ 7d 02 91 81 ] 2010-04-03 12:49:49 OUTGOING [ 02 01 50 56 08 02 81 64 5a 08 02 82 a2 ] Call Ref:0164 Type:Release Compl (0x5a) Cause:coding:ITU-T(0) location:Public network, local user(2) val:No Circuit/Channel Available(34) The call in not reaching freeswitch ( I enabled debug log. But nothing is printing in it ). Can someone suggest how to make this work. Please ask me if you need more information?, since I don't know what to give now.