Hi all, In my office we have a Hard PBX, with some 4 extensions. We also have sangoma A102 card.
From the Hard PBX, if 0 is pressed, it is setup in a way that it will go to outside world. I've connected that line to span2 of the card. The span2 in the A102 card, is configured as PRI_NET.
wanrouter status shows connected for the span2. But if I dial from the extension, I got the following in the sangoma_dchan log. 2010-04-03 12:49:49 INCOMING [ 00 01 54 50 08 02 01 64 05 04 03 80 90 a3 6c 0c 01 81 34 34 33 39 31 31 34 36 30 30 7d 02 91 81 ] Call Ref:0164 Type:Setup (0x5) Bearer Capability:Coding:ITU-T(0) TransferCap:Speech(0) TransferRate:64 Kbit/s(16) L1Prot:G.711 A-Law(3) Calling Party Number:4439114600(l:10) plan:isdn(1) type:unknown(0)scr:user, passed(1) pres:allowed(0) High-Layer Compatibility:Undecodedhex [ 7d 02 91 81 ] 2010-04-03 12:49:49 OUTGOING [ 02 01 50 56 08 02 81 64 5a 08 02 82 a2 ] Call Ref:0164 Type:Release Compl (0x5a) Cause:coding:ITU-T(0) location:Public network, local user(2) val:No Circuit/Channel Available(34) The call in not reaching freeswitch ( I enabled debug log. But nothing is printing in it ). Can someone suggest how to make this work. Please ask me if you need more information?, since I don't know what to give now.
You might want to update to the boost PRI stack and try again: http://wiki.sangoma.com/wanpipe-api-freetdm -MC On Mon, Apr 5, 2010 at 9:24 PM, lakshmanan ganapathy <lakindia89@gmail.com>wrote:
Hi all, In my office we have a Hard PBX, with some 4 extensions. We also have sangoma A102 card. From the Hard PBX, if 0 is pressed, it is setup in a way that it will go to outside world. I've connected that line to span2 of the card. The span2 in the A102 card, is configured as PRI_NET.
wanrouter status shows connected for the span2.
But if I dial from the extension, I got the following in the sangoma_dchan log. 2010-04-03 12:49:49 INCOMING [ 00 01 54 50 08 02 01 64 05 04 03 80 90 a3 6c 0c 01 81 34 34 33 39 31 31 34 36 30 30 7d 02 91 81 ] Call Ref:0164 Type:Setup (0x5) Bearer Capability:Coding:ITU-T(0) TransferCap:Speech(0) TransferRate:64 Kbit/s(16) L1Prot:G.711 A-Law(3) Calling Party Number:4439114600(l:10) plan:isdn(1) type:unknown(0)scr:user, passed(1) pres:allowed(0) High-Layer Compatibility:Undecodedhex [ 7d 02 91 81 ]
2010-04-03 12:49:49 OUTGOING [ 02 01 50 56 08 02 81 64 5a 08 02 82 a2 ] Call Ref:0164 Type:Release Compl (0x5a) Cause:coding:ITU-T(0) location:Public network, local user(2) val:No Circuit/Channel Available(34)
The call in not reaching freeswitch ( I enabled debug log. But nothing is printing in it ). Can someone suggest how to make this work.
Please ask me if you need more information?, since I don't know what to give now.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi Lakshmanan, If you do not have anything printing in /var/log/sangoma_mgd.log, and you have: verbose=4 //(or higher) in /etc/wanpipe/smg_pri.conf, check that you have these lines in /etc/syslog.conf (or /etc/rsyslog.conf): local2.* /var/log/sangoma_mgd.log and restart your syslog. my first guess is that you do not have openzap loaded so sangoma_prid is rejecting all incoming calls, but I would need logs in /var/log/sangoma_mgd.log to confirm. If openzap is not loaded, you can type: load mod_openzap from the freeswitch CLI to load it. -- *David Yat Sin, **BEng, **Software Developer** *Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 119 | e. _dyatsin@sangoma.com <mailto:dyatsin@sangoma.com>_ On 4/6/2010 12:24 AM, lakshmanan ganapathy wrote:
Hi all, In my office we have a Hard PBX, with some 4 extensions. We also have sangoma A102 card. From the Hard PBX, if 0 is pressed, it is setup in a way that it will go to outside world. I've connected that line to span2 of the card. The span2 in the A102 card, is configured as PRI_NET.
wanrouter status shows connected for the span2.
But if I dial from the extension, I got the following in the sangoma_dchan log. 2010-04-03 12:49:49 INCOMING [ 00 01 54 50 08 02 01 64 05 04 03 80 90 a3 6c 0c 01 81 34 34 33 39 31 31 34 36 30 30 7d 02 91 81 ] Call Ref:0164 Type:Setup (0x5) Bearer Capability:Coding:ITU-T(0) TransferCap:Speech(0) TransferRate:64 Kbit/s(16) L1Prot:G.711 A-Law(3) Calling Party Number:4439114600(l:10) plan:isdn(1) type:unknown(0)scr:user, passed(1) pres:allowed(0) High-Layer Compatibility:Undecodedhex [ 7d 02 91 81 ]
2010-04-03 12:49:49 OUTGOING [ 02 01 50 56 08 02 81 64 5a 08 02 82 a2 ] Call Ref:0164 Type:Release Compl (0x5a) Cause:coding:ITU-T(0) location:Public network, local user(2) val:No Circuit/Channel Available(34)
The call in not reaching freeswitch ( I enabled debug log. But nothing is printing in it ). Can someone suggest how to make this work.
Please ask me if you need more information?, since I don't know what to give now.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi, I have set verbose=4 in smg_pri.conf. I started the wanrouter. Here is the sangoma_mgd.log Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: ================System restart============= Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Sangoma PRI Protocol Stack Daemon = Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Version: 1.63 = Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Date: Feb 26 2010 = Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Wanpipe Release: wanpipe-3.5.8.6 = Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Revision:Revision: 15607 = Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: =========================================== Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: Number of spans:2 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: Verbosity set to:4 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: Log Debug disabled (local:2) Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: Log Boost disabled (local:6) Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: TSoft:span:1 pri_cpe euroisdn dChan:16 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: TSoft:span:2 pri_net euroisdn dChan:16 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: s2:Status:Up prot:Down Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: BST:(P) Local:127.0.0.66:53001Remote: 127.0.0.65:53001 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: BST:(N) Local:127.0.0.66:53000Remote: 127.0.0.65:53000 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: BST:Version:103 Apr 7 13:58:27 FMS-FreeSwitch sangoma_prid: s2:Status:Up prot:Up Apr 7 13:58:31 FMS-FreeSwitch sangoma_prid: s1:Status:Up prot:Down Apr 7 13:58:32 FMS-FreeSwitch sangoma_prid: s1:Status:Up prot:Up Apr 7 13:58:37 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:58:37 last:13:58:26 grace:0) Apr 7 13:58:43 FMS-FreeSwitch sangoma_prid: Opening /var/log/sangoma_pri/dchan_1.log Apr 7 13:58:47 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:58:47 last:13:58:37 grace:0) Apr 7 13:58:57 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:58:57 last:13:58:47 grace:0) Apr 7 13:58:57 FMS-FreeSwitch sangoma_prid: Assuming application is dead Apr 7 13:59:07 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:07 last:13:58:57 grace:0) Apr 7 13:59:17 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:17 last:13:59:07 grace:0) Apr 7 13:59:27 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:27 last:13:59:17 grace:0) Apr 7 13:59:27 FMS-FreeSwitch sangoma_prid: Assuming application is dead Apr 7 13:59:37 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:37 last:13:59:27 grace:0) Apr 7 13:59:47 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:47 last:13:59:37 grace:0) Apr 7 13:59:57 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:57 last:13:59:47 grace:0) Apr 7 13:59:57 FMS-FreeSwitch sangoma_prid: Assuming application is dead
From freeswitch cli, if I say originate openzap/1/a/39114603@g2 &park(), I got the following in the sangoma_mgd.log.
Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: g2:Outgoing call (Smg-ID:2) Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: s2:Outgoing call ChanRq:1 Called-Nb[39114603] Calling-Nb[Unknown] (Smg-ID:2) Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: s2c1:Remote released-Unallocated (unassigned) number(1) Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: s2c0:Call was already cleared (TSOFT-ID:4) Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: g2:Call cleared (SMG-ID:2) By seeing this, I confirmed that span2 is working. Leave out the Unallocated number, that's my internal problem.
From the extension, if I dial 0, nothing is printing in sangoma_mgd.log But in dhcan2.log I got the No/Circuit or channel available as I mentioned earlier.
In freeswitch mod_openzap is loaded properly. Any help!!! On Wed, Apr 7, 2010 at 2:17 AM, David Yat Sin <david.yatsin@gmail.com>wrote:
Hi Lakshmanan, If you do not have anything printing in /var/log/sangoma_mgd.log, and you have: verbose=4 //(or higher)
in /etc/wanpipe/smg_pri.conf, check that you have these lines in /etc/syslog.conf (or /etc/rsyslog.conf):
local2.* /var/log/sangoma_mgd.log
and restart your syslog.
my first guess is that you do not have openzap loaded so sangoma_prid is rejecting all incoming calls, but I would need logs in /var/log/sangoma_mgd.log to confirm.
If openzap is not loaded, you can type: load mod_openzap
from the freeswitch CLI to load it.
--
*David Yat Sin, **BEng, **Software Developer** *Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 119 | e. *dyatsin@sangoma.com*
On 4/6/2010 12:24 AM, lakshmanan ganapathy wrote:
Hi all, In my office we have a Hard PBX, with some 4 extensions. We also have sangoma A102 card.
From the Hard PBX, if 0 is pressed, it is setup in a way that it will go to outside world. I've connected that line to span2 of the card. The span2 in the A102 card, is configured as PRI_NET.
wanrouter status shows connected for the span2.
But if I dial from the extension, I got the following in the sangoma_dchan log. 2010-04-03 12:49:49 INCOMING [ 00 01 54 50 08 02 01 64 05 04 03 80 90 a3 6c 0c 01 81 34 34 33 39 31 31 34 36 30 30 7d 02 91 81 ] Call Ref:0164 Type:Setup (0x5) Bearer Capability:Coding:ITU-T(0) TransferCap:Speech(0) TransferRate:64 Kbit/s(16) L1Prot:G.711 A-Law(3) Calling Party Number:4439114600(l:10) plan:isdn(1) type:unknown(0)scr:user, passed(1) pres:allowed(0) High-Layer Compatibility:Undecodedhex [ 7d 02 91 81 ]
2010-04-03 12:49:49 OUTGOING [ 02 01 50 56 08 02 81 64 5a 08 02 82 a2 ] Call Ref:0164 Type:Release Compl (0x5a) Cause:coding:ITU-T(0) location:Public network, local user(2) val:No Circuit/Channel Available(34)
The call in not reaching freeswitch ( I enabled debug log. But nothing is printing in it ). Can someone suggest how to make this work.
Please ask me if you need more information?, since I don't know what to give now.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.frees...
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Can you provide me with SSH access to that box and a phone number I can use to trigger an incoming call on span 2 to that box? You can email me at: dyatsin@sangoma.com David On 4/7/2010 4:48 AM, lakshmanan ganapathy wrote:
Hi, I have set verbose=4 in smg_pri.conf. I started the wanrouter. Here is the sangoma_mgd.log Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: ================System restart============= Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Sangoma PRI Protocol Stack Daemon = Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Version: 1.63 = Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Date: Feb 26 2010 = Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Wanpipe Release: wanpipe-3.5.8.6 = Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Revision:Revision: 15607 = Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: =========================================== Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: Number of spans:2 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: Verbosity set to:4 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: Log Debug disabled (local:2) Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: Log Boost disabled (local:6) Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: TSoft:span:1 pri_cpe euroisdn dChan:16 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: TSoft:span:2 pri_net euroisdn dChan:16 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: s2:Status:Up prot:Down Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: BST:(P) Local:127.0.0.66:53001 <http://127.0.0.66:53001> Remote:127.0.0.65:53001 <http://127.0.0.65:53001> Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: BST:(N) Local:127.0.0.66:53000 <http://127.0.0.66:53000> Remote:127.0.0.65:53000 <http://127.0.0.65:53000> Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: BST:Version:103 Apr 7 13:58:27 FMS-FreeSwitch sangoma_prid: s2:Status:Up prot:Up Apr 7 13:58:31 FMS-FreeSwitch sangoma_prid: s1:Status:Up prot:Down Apr 7 13:58:32 FMS-FreeSwitch sangoma_prid: s1:Status:Up prot:Up Apr 7 13:58:37 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:58:37 last:13:58:26 grace:0) Apr 7 13:58:43 FMS-FreeSwitch sangoma_prid: Opening /var/log/sangoma_pri/dchan_1.log Apr 7 13:58:47 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:58:47 last:13:58:37 grace:0) Apr 7 13:58:57 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:58:57 last:13:58:47 grace:0) Apr 7 13:58:57 FMS-FreeSwitch sangoma_prid: Assuming application is dead Apr 7 13:59:07 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:07 last:13:58:57 grace:0) Apr 7 13:59:17 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:17 last:13:59:07 grace:0) Apr 7 13:59:27 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:27 last:13:59:17 grace:0) Apr 7 13:59:27 FMS-FreeSwitch sangoma_prid: Assuming application is dead Apr 7 13:59:37 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:37 last:13:59:27 grace:0) Apr 7 13:59:47 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:47 last:13:59:37 grace:0) Apr 7 13:59:57 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:57 last:13:59:47 grace:0) Apr 7 13:59:57 FMS-FreeSwitch sangoma_prid: Assuming application is dead
From freeswitch cli, if I say originate openzap/1/a/39114603@g2 &park(), I got the following in the sangoma_mgd.log.
Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: g2:Outgoing call (Smg-ID:2) Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: s2:Outgoing call ChanRq:1 Called-Nb[39114603] Calling-Nb[Unknown] (Smg-ID:2) Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: s2c1:Remote released-Unallocated (unassigned) number(1) Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: s2c0:Call was already cleared (TSOFT-ID:4) Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: g2:Call cleared (SMG-ID:2)
By seeing this, I confirmed that span2 is working. Leave out the Unallocated number, that's my internal problem.
From the extension, if I dial 0, nothing is printing in sangoma_mgd.log But in dhcan2.log I got the No/Circuit or channel available as I mentioned earlier.
In freeswitch mod_openzap is loaded properly. Any help!!!
On Wed, Apr 7, 2010 at 2:17 AM, David Yat Sin <david.yatsin@gmail.com <mailto:david.yatsin@gmail.com>> wrote:
Hi Lakshmanan, If you do not have anything printing in /var/log/sangoma_mgd.log, and you have: verbose=4 //(or higher)
in /etc/wanpipe/smg_pri.conf, check that you have these lines in /etc/syslog.conf (or /etc/rsyslog.conf):
local2.* /var/log/sangoma_mgd.log
and restart your syslog.
my first guess is that you do not have openzap loaded so sangoma_prid is rejecting all incoming calls, but I would need logs in /var/log/sangoma_mgd.log to confirm.
If openzap is not loaded, you can type: load mod_openzap
from the freeswitch CLI to load it.
--
*David Yat Sin, **BEng, **Software Developer** *Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 119 | e. _dyatsin@sangoma.com <mailto:dyatsin@sangoma.com>_
On 4/6/2010 12:24 AM, lakshmanan ganapathy wrote:
Hi all, In my office we have a Hard PBX, with some 4 extensions. We also have sangoma A102 card. >From the Hard PBX, if 0 is pressed, it is setup in a way that it will go to outside world. I've connected that line to span2 of the card. The span2 in the A102 card, is configured as PRI_NET.
wanrouter status shows connected for the span2.
But if I dial from the extension, I got the following in the sangoma_dchan log. 2010-04-03 12:49:49 INCOMING [ 00 01 54 50 08 02 01 64 05 04 03 80 90 a3 6c 0c 01 81 34 34 33 39 31 31 34 36 30 30 7d 02 91 81 ] Call Ref:0164 Type:Setup (0x5) Bearer Capability:Coding:ITU-T(0) TransferCap:Speech(0) TransferRate:64 Kbit/s(16) L1Prot:G.711 A-Law(3) Calling Party Number:4439114600(l:10) plan:isdn(1) type:unknown(0)scr:user, passed(1) pres:allowed(0) High-Layer Compatibility:Undecodedhex [ 7d 02 91 81 ]
2010-04-03 12:49:49 OUTGOING [ 02 01 50 56 08 02 81 64 5a 08 02 82 a2 ] Call Ref:0164 Type:Release Compl (0x5a) Cause:coding:ITU-T(0) location:Public network, local user(2) val:No Circuit/Channel Available(34)
The call in not reaching freeswitch ( I enabled debug log. But nothing is printing in it ). Can someone suggest how to make this work.
Please ask me if you need more information?, since I don't know what to give now.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Right now I can't provide you the ssh access to the box, since the company policy doesn't allow to do so. But I can explain you more clearly about the setup and my need. The following is the setup.
From a Telephone Exchange, a line will be connected to the FS-BOX, in span1. We have an internal Hard PBX with some 4 extensions. We have connected the Hard PBX to FS-BOX in span2.
I've configured span1 as PRI_CPE and span2 as PRI_NET. span1 don't have any problems. Both incoming and outgoing works fine. In span2, I was able to make incoming call. It rings the extension. But when I make outgoing call from those extension, I got NO CIRCUIT OR CHANNEL AVAILABLE. Right now in sangoma_mgd log, I got the following when I make outgoing call. Apr 8 10:20:21 FMS-FreeSwitch sangoma_prid: Opening /var/log/sangoma_pri/dchan_2.log Apr 8 10:20:21 FMS-FreeSwitch sangoma_prid: Rx Tsoft [s2c0 7:StatusIn 3:134716232 id:65535] Apr 8 10:20:21 FMS-FreeSwitch sangoma_prid: Rx Tsoft [s2c0 7:StatusIn 4:134716308 id:65535] Moreover I also have an Asterisk Box with Digim card. It works fine there. When i dial from extension, it reaches asterisk and it responds with SETUP_ACK. please guide me. On Wed, Apr 7, 2010 at 10:44 PM, David Yat Sin <david.yatsin@gmail.com> wrote:
Can you provide me with SSH access to that box and a phone number I can
use to trigger an incoming call on span 2 to that box?
You can email me at: dyatsin@sangoma.com
David
On 4/7/2010 4:48 AM, lakshmanan ganapathy wrote:
Hi, I have set verbose=4 in smg_pri.conf. I started the wanrouter. Here is the sangoma_mgd.log Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: ================System
restart=============
Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Sangoma PRI Protocol Stack Daemon = Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Version: 1.63 = Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Date: Feb 26 2010 = Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Wanpipe Release: wanpipe-3.5.8.6 = Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Revision:Revision: 15607 = Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: =========================================== Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: Number of spans:2 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: Verbosity set to:4 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: Log Debug disabled (local:2) Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: Log Boost disabled (local:6) Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: TSoft:span:1 pri_cpe euroisdn dChan:16 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: TSoft:span:2 pri_net euroisdn dChan:16 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: s2:Status:Up prot:Down Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: BST:(P) Local: 127.0.0.66:53001 Remote:127.0.0.65:53001 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: BST:(N) Local: 127.0.0.66:53000 Remote:127.0.0.65:53000 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: BST:Version:103 Apr 7 13:58:27 FMS-FreeSwitch sangoma_prid: s2:Status:Up prot:Up Apr 7 13:58:31 FMS-FreeSwitch sangoma_prid: s1:Status:Up prot:Down Apr 7 13:58:32 FMS-FreeSwitch sangoma_prid: s1:Status:Up prot:Up Apr 7 13:58:37 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:58:37 last:13:58:26 grace:0) Apr 7 13:58:43 FMS-FreeSwitch sangoma_prid: Opening /var/log/sangoma_pri/dchan_1.log Apr 7 13:58:47 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:58:47 last:13:58:37 grace:0) Apr 7 13:58:57 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:58:57 last:13:58:47 grace:0) Apr 7 13:58:57 FMS-FreeSwitch sangoma_prid: Assuming application is dead Apr 7 13:59:07 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:07 last:13:58:57 grace:0) Apr 7 13:59:17 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:17 last:13:59:07 grace:0) Apr 7 13:59:27 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:27 last:13:59:17 grace:0) Apr 7 13:59:27 FMS-FreeSwitch sangoma_prid: Assuming application is dead Apr 7 13:59:37 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:37 last:13:59:27 grace:0) Apr 7 13:59:47 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:47 last:13:59:37 grace:0) Apr 7 13:59:57 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:57 last:13:59:47 grace:0) Apr 7 13:59:57 FMS-FreeSwitch sangoma_prid: Assuming application is dead
From freeswitch cli, if I say originate openzap/1/a/39114603@g2 &park(), I got the following in the sangoma_mgd.log.
Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: g2:Outgoing call (Smg-ID:2) Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: s2:Outgoing call ChanRq:1 Called-Nb[39114603] Calling-Nb[Unknown] (Smg-ID:2) Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: s2c1:Remote released-Unallocated (unassigned) number(1) Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: s2c0:Call was already cleared (TSOFT-ID:4) Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: g2:Call cleared (SMG-ID:2)
By seeing this, I confirmed that span2 is working. Leave out the Unallocated number, that's my internal problem.
From the extension, if I dial 0, nothing is printing in sangoma_mgd.log But in dhcan2.log I got the No/Circuit or channel available as I mentioned earlier.
In freeswitch mod_openzap is loaded properly. Any help!!!
On Wed, Apr 7, 2010 at 2:17 AM, David Yat Sin <david.yatsin@gmail.com> wrote:
Hi Lakshmanan, If you do not have anything printing in /var/log/sangoma_mgd.log, and you
have:
verbose=4 //(or higher)
in /etc/wanpipe/smg_pri.conf, check that you have these lines in /etc/syslog.conf (or /etc/rsyslog.conf):
local2.* /var/log/sangoma_mgd.log
and restart your syslog.
my first guess is that you do not have openzap loaded so sangoma_prid is rejecting all incoming calls, but I would need logs in /var/log/sangoma_mgd.log to confirm.
If openzap is not loaded, you can type: load mod_openzap
from the freeswitch CLI to load it.
--
David Yat Sin, BEng, Software Developer Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 119 | e. dyatsin@sangoma.com
On 4/6/2010 12:24 AM, lakshmanan ganapathy wrote:
Hi all, In my office we have a Hard PBX, with some 4 extensions. We also have sangoma A102 card.
From the Hard PBX, if 0 is pressed, it is setup in a way that it will go to outside world. I've connected that line to span2 of the card. The span2 in the A102 card, is configured as PRI_NET.
wanrouter status shows connected for the span2.
But if I dial from the extension, I got the following in the sangoma_dchan log. 2010-04-03 12:49:49 INCOMING [ 00 01 54 50 08 02 01 64 05 04 03 80 90 a3 6c 0c 01 81 34 34 33 39 31 31 34 36 30 30 7d 02 91 81 ] Call Ref:0164 Type:Setup (0x5) Bearer Capability:Coding:ITU-T(0) TransferCap:Speech(0) TransferRate:64 Kbit/s(16) L1Prot:G.711 A-Law(3) Calling Party Number:4439114600(l:10) plan:isdn(1) type:unknown(0)scr:user, passed(1) pres:allowed(0) High-Layer Compatibility:Undecodedhex [ 7d 02 91 81 ]
2010-04-03 12:49:49 OUTGOING [ 02 01 50 56 08 02 81 64 5a 08 02 82 a2 ] Call Ref:0164 Type:Release Compl (0x5a) Cause:coding:ITU-T(0) location:Public network, local user(2) val:No Circuit/Channel Available(34)
The call in not reaching freeswitch ( I enabled debug log. But nothing is printing in it ). Can someone suggest how to make this work.
Please ask me if you need more information?, since I don't know what to give now.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
On Thu, Apr 8, 2010 at 9:38 PM, lakshmanan ganapathy <lakindia89@gmail.com>wrote:
Right now I can't provide you the ssh access to the box, since the company policy doesn't allow to do so.
You might want to ask the company if they can lift that policy for the sake of saving everyone's time and energy. I know we have some professionals who would be willing to sign a reasonable NDA or whatnot to ensure security. -MC
But I can explain you more clearly about the setup and my need.
The following is the setup.
From a Telephone Exchange, a line will be connected to the FS-BOX, in span1. We have an internal Hard PBX with some 4 extensions. We have connected the Hard PBX to FS-BOX in span2.
I've configured span1 as PRI_CPE and span2 as PRI_NET. span1 don't have any problems. Both incoming and outgoing works fine. In span2, I was able to make incoming call. It rings the extension. But when I make outgoing call from those extension, I got NO CIRCUIT OR CHANNEL AVAILABLE.
Right now in sangoma_mgd log, I got the following when I make outgoing call.
Apr 8 10:20:21 FMS-FreeSwitch sangoma_prid: Opening /var/log/sangoma_pri/dchan_2.log Apr 8 10:20:21 FMS-FreeSwitch sangoma_prid: Rx Tsoft [s2c0 7:StatusIn 3:134716232 id:65535] Apr 8 10:20:21 FMS-FreeSwitch sangoma_prid: Rx Tsoft [s2c0 7:StatusIn 4:134716308 id:65535]
Moreover I also have an Asterisk Box with Digim card. It works fine there. When i dial from extension, it reaches asterisk and it responds with SETUP_ACK.
please guide me.
On Wed, Apr 7, 2010 at 10:44 PM, David Yat Sin <david.yatsin@gmail.com> wrote:
Can you provide me with SSH access to that box and a phone number I can
use to trigger an incoming call on span 2 to that box?
You can email me at: dyatsin@sangoma.com
David
On 4/7/2010 4:48 AM, lakshmanan ganapathy wrote:
Hi, I have set verbose=4 in smg_pri.conf. I started the wanrouter. Here is the sangoma_mgd.log Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: ================System
restart=============
Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Sangoma PRI Protocol Stack Daemon = Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Version: 1.63 = Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Date: Feb 26 2010 = Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Wanpipe Release: wanpipe-3.5.8.6 = Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Revision:Revision: 15607 = Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: =========================================== Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: Number of spans:2 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: Verbosity set to:4 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: Log Debug disabled (local:2) Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: Log Boost disabled (local:6) Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: TSoft:span:1 pri_cpe euroisdn dChan:16 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: TSoft:span:2 pri_net euroisdn dChan:16 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: s2:Status:Up prot:Down Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: BST:(P) Local: 127.0.0.66:53001 Remote:127.0.0.65:53001 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: BST:(N) Local: 127.0.0.66:53000 Remote:127.0.0.65:53000 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: BST:Version:103 Apr 7 13:58:27 FMS-FreeSwitch sangoma_prid: s2:Status:Up prot:Up Apr 7 13:58:31 FMS-FreeSwitch sangoma_prid: s1:Status:Up prot:Down Apr 7 13:58:32 FMS-FreeSwitch sangoma_prid: s1:Status:Up prot:Up Apr 7 13:58:37 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:58:37 last:13:58:26 grace:0) Apr 7 13:58:43 FMS-FreeSwitch sangoma_prid: Opening /var/log/sangoma_pri/dchan_1.log Apr 7 13:58:47 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:58:47 last:13:58:37 grace:0) Apr 7 13:58:57 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:58:57 last:13:58:47 grace:0) Apr 7 13:58:57 FMS-FreeSwitch sangoma_prid: Assuming application is dead Apr 7 13:59:07 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:07 last:13:58:57 grace:0) Apr 7 13:59:17 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:17 last:13:59:07 grace:0) Apr 7 13:59:27 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:27 last:13:59:17 grace:0) Apr 7 13:59:27 FMS-FreeSwitch sangoma_prid: Assuming application is dead Apr 7 13:59:37 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:37 last:13:59:27 grace:0) Apr 7 13:59:47 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:47 last:13:59:37 grace:0) Apr 7 13:59:57 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:57 last:13:59:47 grace:0) Apr 7 13:59:57 FMS-FreeSwitch sangoma_prid: Assuming application is dead
From freeswitch cli, if I say originate openzap/1/a/39114603@g2 &park(), I got the following in the sangoma_mgd.log.
Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: g2:Outgoing call (Smg-ID:2) Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: s2:Outgoing call ChanRq:1 Called-Nb[39114603] Calling-Nb[Unknown] (Smg-ID:2) Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: s2c1:Remote released-Unallocated (unassigned) number(1) Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: s2c0:Call was already cleared (TSOFT-ID:4) Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: g2:Call cleared (SMG-ID:2)
By seeing this, I confirmed that span2 is working. Leave out the Unallocated number, that's my internal problem.
From the extension, if I dial 0, nothing is printing in sangoma_mgd.log But in dhcan2.log I got the No/Circuit or channel available as I mentioned earlier.
In freeswitch mod_openzap is loaded properly. Any help!!!
On Wed, Apr 7, 2010 at 2:17 AM, David Yat Sin <david.yatsin@gmail.com> wrote:
Hi Lakshmanan, If you do not have anything printing in /var/log/sangoma_mgd.log, and
you have:
verbose=4 //(or higher)
in /etc/wanpipe/smg_pri.conf, check that you have these lines in /etc/syslog.conf (or /etc/rsyslog.conf):
local2.* /var/log/sangoma_mgd.log
and restart your syslog.
my first guess is that you do not have openzap loaded so sangoma_prid is rejecting all incoming calls, but I would need logs in /var/log/sangoma_mgd.log to confirm.
If openzap is not loaded, you can type: load mod_openzap
from the freeswitch CLI to load it.
--
David Yat Sin, BEng, Software Developer Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 119 | e. dyatsin@sangoma.com
On 4/6/2010 12:24 AM, lakshmanan ganapathy wrote:
Hi all, In my office we have a Hard PBX, with some 4 extensions. We also have sangoma A102 card.
From the Hard PBX, if 0 is pressed, it is setup in a way that it will go to outside world. I've connected that line to span2 of the card. The span2 in the A102 card, is configured as PRI_NET.
wanrouter status shows connected for the span2.
But if I dial from the extension, I got the following in the sangoma_dchan log. 2010-04-03 12:49:49 INCOMING [ 00 01 54 50 08 02 01 64 05 04 03 80 90 a3 6c 0c 01 81 34 34 33 39 31 31 34 36 30 30 7d 02 91 81 ] Call Ref:0164 Type:Setup (0x5) Bearer Capability:Coding:ITU-T(0) TransferCap:Speech(0) TransferRate:64 Kbit/s(16) L1Prot:G.711 A-Law(3) Calling Party Number:4439114600(l:10) plan:isdn(1) type:unknown(0)scr:user, passed(1) pres:allowed(0) High-Layer Compatibility:Undecodedhex [ 7d 02 91 81 ]
2010-04-03 12:49:49 OUTGOING [ 02 01 50 56 08 02 81 64 5a 08 02 82 a2 ] Call Ref:0164 Type:Release Compl (0x5a) Cause:coding:ITU-T(0) location:Public network, local user(2) val:No Circuit/Channel Available(34)
The call in not reaching freeswitch ( I enabled debug log. But nothing is printing in it ). Can someone suggest how to make this work.
Please ask me if you need more information?, since I don't know what to give now.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:
http://lists.freeswitch.org/mailman/options/freeswitch-users
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi all, I've contacted the sangoma support, and they are looking into the issue. They also told that the problem is in the PRI STACK. So in the mean time, I planned to change the stack and check. So I switched to libpri. I've configured the things and both Incoming and outgoing works on span1. On span2, from the extension, If I dial, I got 2010-04-17 10:51:15.218100 [WARNING] ozmod_libpri.c:760 --Duplicate Ring on channel 2:-1 (ignored) The freeswitch log is: http://pastebin.freeswitch.org/12738 I also went to see what is the problem. It seems to me that, when SETUP comes, ozmod_libpri.c is checking for the B-channel number. Since it is not there, it print Duplicate ring on channel. I also came to know that, first SETUP will request the telco (B-chan identification won't be there). Then the telco responds with the B-channel to use in SETUP_ACK. The further communication will happen with the B-chan identification. Am I correct!!. Please give inputs to me to solve this issue. On Fri, Apr 9, 2010 at 11:11 AM, Michael Collins <msc@freeswitch.org> wrote:
On Thu, Apr 8, 2010 at 9:38 PM, lakshmanan ganapathy <lakindia89@gmail.com
wrote:
Right now I can't provide you the ssh access to the box, since the company policy doesn't allow to do so.
You might want to ask the company if they can lift that policy for the sake of saving everyone's time and energy. I know we have some professionals who would be willing to sign a reasonable NDA or whatnot to ensure security. -MC
But I can explain you more clearly about the setup and my need.
The following is the setup.
From a Telephone Exchange, a line will be connected to the FS-BOX, in span1. We have an internal Hard PBX with some 4 extensions. We have connected the Hard PBX to FS-BOX in span2.
I've configured span1 as PRI_CPE and span2 as PRI_NET. span1 don't have any problems. Both incoming and outgoing works fine. In span2, I was able to make incoming call. It rings the extension. But when I make outgoing call from those extension, I got NO CIRCUIT OR CHANNEL AVAILABLE.
Right now in sangoma_mgd log, I got the following when I make outgoing call.
Apr 8 10:20:21 FMS-FreeSwitch sangoma_prid: Opening /var/log/sangoma_pri/dchan_2.log Apr 8 10:20:21 FMS-FreeSwitch sangoma_prid: Rx Tsoft [s2c0 7:StatusIn 3:134716232 id:65535] Apr 8 10:20:21 FMS-FreeSwitch sangoma_prid: Rx Tsoft [s2c0 7:StatusIn 4:134716308 id:65535]
Moreover I also have an Asterisk Box with Digim card. It works fine there. When i dial from extension, it reaches asterisk and it responds with SETUP_ACK.
please guide me.
On Wed, Apr 7, 2010 at 10:44 PM, David Yat Sin <david.yatsin@gmail.com> wrote:
Can you provide me with SSH access to that box and a phone number I can
use to trigger an incoming call on span 2 to that box?
You can email me at: dyatsin@sangoma.com
David
On 4/7/2010 4:48 AM, lakshmanan ganapathy wrote:
Hi, I have set verbose=4 in smg_pri.conf. I started the wanrouter. Here is the sangoma_mgd.log Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: ================System
restart=============
Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Sangoma PRI Protocol Stack Daemon = Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Version: 1.63 = Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Date: Feb 26 2010 = Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Wanpipe Release: wanpipe-3.5.8.6 = Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Revision:Revision: 15607 = Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: =========================================== Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: Number of spans:2 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: Verbosity set to:4 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: Log Debug disabled (local:2) Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: Log Boost disabled (local:6) Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: TSoft:span:1 pri_cpe euroisdn dChan:16 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: TSoft:span:2 pri_net euroisdn dChan:16 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: s2:Status:Up prot:Down Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: BST:(P) Local: 127.0.0.66:53001 Remote:127.0.0.65:53001 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: BST:(N) Local: 127.0.0.66:53000 Remote:127.0.0.65:53000 Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: BST:Version:103 Apr 7 13:58:27 FMS-FreeSwitch sangoma_prid: s2:Status:Up prot:Up Apr 7 13:58:31 FMS-FreeSwitch sangoma_prid: s1:Status:Up prot:Down Apr 7 13:58:32 FMS-FreeSwitch sangoma_prid: s1:Status:Up prot:Up Apr 7 13:58:37 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:58:37 last:13:58:26 grace:0) Apr 7 13:58:43 FMS-FreeSwitch sangoma_prid: Opening /var/log/sangoma_pri/dchan_1.log Apr 7 13:58:47 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:58:47 last:13:58:37 grace:0) Apr 7 13:58:57 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:58:57 last:13:58:47 grace:0) Apr 7 13:58:57 FMS-FreeSwitch sangoma_prid: Assuming application is dead Apr 7 13:59:07 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:07 last:13:58:57 grace:0) Apr 7 13:59:17 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:17 last:13:59:07 grace:0) Apr 7 13:59:27 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:27 last:13:59:17 grace:0) Apr 7 13:59:27 FMS-FreeSwitch sangoma_prid: Assuming application is dead Apr 7 13:59:37 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:37 last:13:59:27 grace:0) Apr 7 13:59:47 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:47 last:13:59:37 grace:0) Apr 7 13:59:57 FMS-FreeSwitch sangoma_prid: HeartBeat timeout (current:13:59:57 last:13:59:47 grace:0) Apr 7 13:59:57 FMS-FreeSwitch sangoma_prid: Assuming application is dead
From freeswitch cli, if I say originate openzap/1/a/39114603@g2 &park(), I got the following in the sangoma_mgd.log.
Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: g2:Outgoing call (Smg-ID:2) Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: s2:Outgoing call ChanRq:1 Called-Nb[39114603] Calling-Nb[Unknown] (Smg-ID:2) Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: s2c1:Remote released-Unallocated (unassigned) number(1) Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: s2c0:Call was already cleared (TSOFT-ID:4) Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: g2:Call cleared (SMG-ID:2)
By seeing this, I confirmed that span2 is working. Leave out the Unallocated number, that's my internal problem.
From the extension, if I dial 0, nothing is printing in sangoma_mgd.log But in dhcan2.log I got the No/Circuit or channel available as I mentioned earlier.
In freeswitch mod_openzap is loaded properly. Any help!!!
On Wed, Apr 7, 2010 at 2:17 AM, David Yat Sin <david.yatsin@gmail.com> wrote:
Hi Lakshmanan, If you do not have anything printing in /var/log/sangoma_mgd.log, and
you have:
verbose=4 //(or higher)
in /etc/wanpipe/smg_pri.conf, check that you have these lines in /etc/syslog.conf (or /etc/rsyslog.conf):
local2.* /var/log/sangoma_mgd.log
and restart your syslog.
my first guess is that you do not have openzap loaded so sangoma_prid is rejecting all incoming calls, but I would need logs in /var/log/sangoma_mgd.log to confirm.
If openzap is not loaded, you can type: load mod_openzap
from the freeswitch CLI to load it.
--
David Yat Sin, BEng, Software Developer Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 119 | e. dyatsin@sangoma.com
On 4/6/2010 12:24 AM, lakshmanan ganapathy wrote:
Hi all, In my office we have a Hard PBX, with some 4 extensions. We also have sangoma A102 card.
From the Hard PBX, if 0 is pressed, it is setup in a way that it will go to outside world. I've connected that line to span2 of the card. The span2 in the A102 card, is configured as PRI_NET.
wanrouter status shows connected for the span2.
But if I dial from the extension, I got the following in the sangoma_dchan log. 2010-04-03 12:49:49 INCOMING [ 00 01 54 50 08 02 01 64 05 04 03 80 90 a3 6c 0c 01 81 34 34 33 39 31 31 34 36 30 30 7d 02 91 81 ] Call Ref:0164 Type:Setup (0x5) Bearer Capability:Coding:ITU-T(0) TransferCap:Speech(0) TransferRate:64 Kbit/s(16) L1Prot:G.711 A-Law(3) Calling Party Number:4439114600(l:10) plan:isdn(1) type:unknown(0)scr:user, passed(1) pres:allowed(0) High-Layer Compatibility:Undecodedhex [ 7d 02 91 81 ]
2010-04-03 12:49:49 OUTGOING [ 02 01 50 56 08 02 81 64 5a 08 02 82 a2 ] Call Ref:0164 Type:Release Compl (0x5a) Cause:coding:ITU-T(0) location:Public network, local user(2) val:No Circuit/Channel Available(34)
The call in not reaching freeswitch ( I enabled debug log. But nothing is printing in it ). Can someone suggest how to make this work.
Please ask me if you need more information?, since I don't know what to give now.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:
http://lists.freeswitch.org/mailman/options/freeswitch-users
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (3)
-
David Yat Sin
-
lakshmanan ganapathy
-
Michael Collins