I have changed the internal.xml to point to 192.168.21.250 and for some reason the 192.168.1.250 keeps showing up. Also I need the profile to be on 5060. I have also changed the vars.xml to show 5060 and nothing. I have restarted Freeswitch after each change and verified that nothing else is running on 5060. The server does have two interfaces and the default gw is set to 192.168.21.50. The 192.168.1.250 is only for out of band management and will not need access to FS. I have selinux disabled and the iptables stopped as well. The external is running on 5080 but not the internal. Sofia status freeswitch@internal> sofia status Name Type Data State ================================================================================================= 192.168.1.250 alias internal ALIASED 192.168.21.250 alias internal ALIASED external profile sip:mod_sofia@1.1.1.1:5080 <http://sip:mod_sofia@1.1.1.1:5080/> RUNNING (0) internal-ipv6 profile sip:mod_sofia@1.1.1.1:5040 <http://sip:mod_sofia@1.1.1.1:5040/> RUNNING (0) internal profile sip:mod_sofia@1.1.1.1:5041 <http://sip:mod_sofia@1.1.1.1:5041/> RUNNING (0) ================================================================================================= 3 profiles 2 aliases netstat -nat [root@Switch01 sip_profiles]# netstat -nat | grep 192.168.21.250 tcp 0 0 192.168.21.250:5080 <http://192.168.21.250:5080/> 0.0.0.0:* LISTEN internal.xml <!-- port to bind to for sip traffic --> <param name="sip-port" value="$${internal_sip_port}"/> <!-- <param name="sip-port" value="5060"/> --> <param name="dialplan" value="XML"/> <param name="dtmf-duration" value="2000"/> <param name="inbound-codec-prefs" value="$${global_codec_prefs}"/> <param name="outbound-codec-prefs" value="$${global_codec_prefs}"/> <param name="rtp-timer-name" value="soft"/> <!-- ip address to use for rtp, DO NOT USE HOSTNAMES ONLY IP ADDRESSES --> <!-- <param name="rtp-ip" value="$${local_ip_v4}"/> --> <param name="rtp-ip" value="192.168.21.250"/> <!-- ip address to bind to, DO NOT USE HOSTNAMES ONLY IP ADDRESSES --> <!-- <param name="sip-ip" value="$${local_ip_v4}"/> --> <param name="sip-ip" value="192.168.21.250"/> vars.xml <!-- Internal SIP Profile --> <X-PRE-PROCESS cmd="set" data="internal_auth_calls=true"/> <X-PRE-PROCESS cmd="set" data="internal_sip_port=5060"/> <X-PRE-PROCESS cmd="set" data="internal_tls_port=5061"/> <X-PRE-PROCESS cmd="set" data="internal_ssl_enable=false"/> <X-PRE-PROCESS cmd="set" data="internal_ssl_dir=$${base_dir}/conf/ssl"/> <!-- External SIP Profile --> <X-PRE-PROCESS cmd="set" data="external_auth_calls=false"/> <X-PRE-PROCESS cmd="set" data="external_sip_port=5080"/> <X-PRE-PROCESS cmd="set" data="external_tls_port=5081"/> <X-PRE-PROCESS cmd="set" data="external_ssl_enable=false"/> <X-PRE-PROCESS cmd="set" data="external_ssl_dir=$${base_dir}/conf/ssl"/>