I have changed the internal.xml to point to 192.168.21.250 and for some reason the 192.168.1.250 keeps showing up.  Also I need the profile to be on 5060.  I have also changed the vars.xml to show 5060 and nothing.  I have restarted Freeswitch after each change and verified that nothing else is running on 5060.  The server does have two interfaces and the default gw is set to 192.168.21.50.  The 192.168.1.250 is only for out of band management and will not need access to FS.  I have selinux disabled and the iptables stopped as well.  The external is running on 5080 but not the internal.


Sofia status
freeswitch@internal> sofia status 
                     Name    Type                                       Data State
=================================================================================================
            192.168.1.250   alias                                   internal ALIASED
           192.168.21.250   alias                                   internal ALIASED
                 external profile           sip:mod_sofia@1.1.1.1:5080 RUNNING (0)
            internal-ipv6 profile           sip:mod_sofia@1.1.1.1:5040 RUNNING (0)
                 internal profile           sip:mod_sofia@1.1.1.1:5041 RUNNING (0)
=================================================================================================
3 profiles 2 aliases


netstat -nat
[root@Switch01 sip_profiles]# netstat -nat | grep 192.168.21.250
tcp        0      0 192.168.21.250:5080         0.0.0.0:*                   LISTEN   

internal.xml
<!-- port to bind to for sip traffic -->
                <param name="sip-port" value="$${internal_sip_port}"/>
                <!-- <param name="sip-port" value="5060"/> -->
                <param name="dialplan" value="XML"/>
                <param name="dtmf-duration" value="2000"/>
                <param name="inbound-codec-prefs" value="$${global_codec_prefs}"/>
                <param name="outbound-codec-prefs" value="$${global_codec_prefs}"/>
                <param name="rtp-timer-name" value="soft"/>
                <!-- ip address to use for rtp, DO NOT USE HOSTNAMES ONLY IP ADDRESSES -->
                <!-- <param name="rtp-ip" value="$${local_ip_v4}"/> -->
                <param name="rtp-ip" value="192.168.21.250"/>
                <!-- ip address to bind to, DO NOT USE HOSTNAMES ONLY IP ADDRESSES -->
                <!-- <param name="sip-ip" value="$${local_ip_v4}"/> -->
                <param name="sip-ip" value="192.168.21.250"/>


vars.xml
<!-- Internal SIP Profile -->
  <X-PRE-PROCESS cmd="set" data="internal_auth_calls=true"/>
  <X-PRE-PROCESS cmd="set" data="internal_sip_port=5060"/>
  <X-PRE-PROCESS cmd="set" data="internal_tls_port=5061"/>
  <X-PRE-PROCESS cmd="set" data="internal_ssl_enable=false"/>
  <X-PRE-PROCESS cmd="set" data="internal_ssl_dir=$${base_dir}/conf/ssl"/>

  <!-- External SIP Profile -->
  <X-PRE-PROCESS cmd="set" data="external_auth_calls=false"/>
  <X-PRE-PROCESS cmd="set" data="external_sip_port=5080"/>
  <X-PRE-PROCESS cmd="set" data="external_tls_port=5081"/>
  <X-PRE-PROCESS cmd="set" data="external_ssl_enable=false"/>
  <X-PRE-PROCESS cmd="set" data="external_ssl_dir=$${base_dir}/conf/ssl"/>