Hi Mike, folks, Bingo! --shared is your friend. building "plain" openssl 101f with --shared --prefix=/usr/local/opt/openssl and then running fs build gets through configure without problems. Result. [now I only have to get mod_mp4 to work through make :] many thanks, Lawrence On 5 Feb 2014, at 13:57, Michael Jerris wrote:
It looks like the issue on at least a few of these is that your manually rolled 101f installs are static only. If you build those shared it should resolve the issue. Please re-test and let me know.
Thanks Mike
On Feb 5, 2014, at 8:30 AM, Anthony Minessale <anthony.minessale@gmail.com> wrote:
Remember your last config log where I asked you to add -ldl? Everything was right but the test for dtls failed cos it didn't add -ldl to the compile. I suspect once you fix that it will work. Look in the configure.in for that test and see if you can add -ldl to it.
On Feb 5, 2014 1:55 AM, "Tamas Jalsovszky" <jalsot@gmail.com> wrote: Yes, that could be the issue. I'm playing on ubuntu 12.04 which has: ii libssl0.9.8 0.9.8o-7ubuntu3.1 SSL shared libraries ii libssl1.0.0 1.0.1-4ubuntu5.11 SSL shared libraries ii libssl1.0.0:i386 1.0.1-4ubuntu5.11 SSL shared libraries
/lib/x86_64-linux-gnu/libssl.so.0.9.8 /lib/x86_64-linux-gnu/libssl.so.1.0.0 /lib/i386-linux-gnu/libssl.so.1.0.0
/home/tomi/freeswitch_master/openssl-1.0.1f/libssl.pc /home/tomi/freeswitch_master/openssl-1.0.1f/libssl.a /home/tomi/freeswitch_master/openssl101f/lib/pkgconfig/libssl.pc /home/tomi/freeswitch_master/openssl101f/lib/libssl.a
/usr/lib/x86_64-linux-gnu/pkgconfig/libssl.pc /usr/lib/x86_64-linux-gnu/libssl.a /usr/lib/x86_64-linux-gnu/libssl.so /usr/lib/x86_64-linux-gnu/libssl.so.0.9.8 /usr/lib/x86_64-linux-gnu/libssl3.so.1d /usr/lib/x86_64-linux-gnu/libssl3.so
/lib/x86_64-linux-gnu/libcrypto.so.0.9.8 /lib/x86_64-linux-gnu/libcrypto.so.1.0.0 /lib/i386-linux-gnu/libcrypto.so.1.0.0
/usr/lib/x86_64-linux-gnu/libcrypto.so /usr/lib/x86_64-linux-gnu/libcrypto.so.0.9.8 /usr/lib/x86_64-linux-gnu/pkgconfig/libcrypto.pc /usr/lib/x86_64-linux-gnu/libcrypto.a
/home/tomi/freeswitch_master/openssl-1.0.1f/include/openssl/ssl.h /home/tomi/freeswitch_master/openssl101f/include/openssl/ssl.h /usr/include/openssl/ssl.h
On Wed, Feb 5, 2014 at 12:54 AM, Michael Jerris <mike@jerris.com> wrote: it sounds to me like its finding a system version before the other one. can you let me know the other locations on your box where the following files are
libssl.* libcrypto.* openssl/ssl.h
also what is in your config.log comparable to the settings below from mine system
configure:23191: checking for openssl configure:23195: result: yes configure:23199: checking openssl_CFLAGS configure:23202: result: configure:23205: checking openssl_LIBS configure:23208: result: -lssl -lcrypto -lz configure:23408: checking for SSL_CTX_set_tlsext_use_srtp in -lssl configure:23442: result: yes configure:23454: checking for DTLSv1_method in -lssl configure:23488: result: yes
On Feb 4, 2014, at 6:26 PM, Lawrence Conroy <lconroy@insensate.co.uk> wrote:
Hi There, I suspect me too.
OS X Snow Leopard (to remove any residual Mavericks questions) on a C2D MBP. NB: I need openssl 101f only because of the new fS requirement so have left the existing system openssl gubbins in /usr/{bin, include,...} & intended to build 101f "off the beaten track" just for fS. I have no interest in webRTC and its webby tree-hugginess, but if 101f's a requirement ... onwards and upwards.
Steps: grabbed fresh fS master as of a few hours ago. grabbed openssl101f. built openssl to put its stuff in /usr/local/opt/openssl (i.e., /usr/local/opt/openssl/bin, /usr/local/opt/openssl/lib, /usr/local/opt/openssl/include/openssl).
in fS, bootstrap.sh, then .configure configure reports it's added "-I/usr/local/opt/openssl/include" and "-L/usr/local/opt/openssl/lib".
However, same complaint: checking for SSL_CTX_set_tlsext_use_srtp in -lssl... no configure: error: OpenSSL >= 1.0.1e and associaed developement headers required
------------- config.log sez (amongst loads else): configure:23411: checking for SSL_CTX_set_tlsext_use_srtp in -lssl configure:23436: gcc -o conftest -g -O2 -pipe -no-cpp-precomp -I/usr/local/opt/openssl/include -pipe -bind_at_load -L/usr/local/opt/openssl/lib conftest.c -lssl -lssl -lcrypto -lz -lncurses -ljpeg >&5 Undefined symbols: "_SSL_CTX_set_tlsext_use_srtp", referenced from: _main in cc81KfHG.o ld: symbol(s) not found collect2: ld returned 1 exit status -------------
So ... openssl 101f DID put its stuff in /usr/local/opt/openssl, fS appears to have added the -I and -L to look there, but no joy.
Hence, I *think* this is the same issue. Ideas?
all the best, Lawrence
On 4 Feb 2014, at 19:20, Anthony Minessale wrote:
You may need to put the variable declarations first and all the command line switches such as --prefix last.
On Tue, Feb 4, 2014 at 1:09 PM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
Hello,
I tried this: ./configure --prefix=/opt/freeswitch --enable-sse CFLAGS="-I/opt/freeswitch/openssl101f/include" LDFLAGS="-L/opt/freeswitch/openssl101f/lib" Previously I compiled openssl as it is documented in the wiki and in this thread. Unfortunately I got: checking for openssl... yes checking openssl_CFLAGS... checking openssl_LIBS... -lssl -lcrypto adding "-DHAVE_OPENSSL" to SWITCH_AM_CFLAGS checking for SSL_CTX_set_tlsext_use_srtp in -lssl... yes checking for DTLSv1_method in -lssl... no
configure: error: OpenSSL >= 1.0.1e and associaed developement headers required
FS git master (5228e02b19ea3d952d0c476e5aa0f1173b2083e4), Ubuntu 12.04 LTS.
Is there other trick to build FS master with openssl from source code?
Regards, T.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org