Solved this in a very hacky way - replying here in case this helps someone (although very hacky). open freeswitch/libs/freetdm/configure.ac find HAVE_SNG_ISDN="no" and change it to HAVE_SNG_ISDN="yes" finally, build FS again Please take care that this tells configure to build ftmod_sangoma_isdn even if its check for the library fails! Is there a less hacky / more straitforward way? Regards, Kshitij Saxena On Tue, Mar 25, 2014 at 7:46 PM, Kshitij Saxena <ksaxmail@gmail.com> wrote:
ok. The problem seems to be that ftmod_sangoma_isdn hasn't been compiled.
This is strange because I had compiled both wanpipe as well as libsng_isdn before configuring FS.
I repeated the steps again in case I had missed something - recompiled libsng_isdn, began FS with make clean, then bootstrap, then configure and make but ftmod_sangoma_isdn is still not being compiled!
Am I missing something? Is this a bug?
Regards, Kshitij
On Tue, Mar 25, 2014 at 6:03 PM, Kshitij Saxena <ksaxmail@gmail.com>wrote:
The setup is a Sangoma A101E card being run through Wanpipe 7.0.10 on an Ubuntu 13.10 machine.
wanrouter status shows "connected" but "originate freetdm/1/a/xxxxxxxxxx &bridge..." fails with the following error:
[ERR] ftdm_io.c:2674 [s1c1][1:1] outgoing_call method not implemented in this span!
Note that originate is successful with for other cahnnels (i.e. "originate user/1001 &bridge(9198)" works for example)
Would appreciate any guidance. Thanks!
Regards, Kshitij Saxena