here is the dump message for the port : freeswitch@internal> ftdm dump 1 4 span_id: 1 chan_id: 4 physical_span_id: 1 physical_chan_id: 4 physical_status: ok physical_status_red: 0 physical_status_yellow: 0 physical_status_rai: 0 physical_status_blue: 0 physical_status_ais: 0 physical_status_general: 0 signaling_status: UP type: FXO state: DOWN last_state: BUSY txgain: 0.00 rxgain: 0.00 cid_date: cid_name: cid_num: ani: aniII: dnis: rdnis: cause: NONE session: (none) -- States -- -- Function -- -- Location -- -- Time Offset -- PROGRESS => PROGRESS_MEDIA [channel_receive_message_fxo] [mod_freetdm.c:1040] 0ms PROGRESS_MEDIA => UP [channel_receive_message_fxo] [mod_freetdm.c:1040] 0ms UP => HANGUP [channel_on_hangup] [mod_freetdm.c:586] 11641ms HANGUP => DOWN [ftdm_analog_channel_run] [ftmod_analog.c:564] 519ms DOWN => DIALING [analog_fxo_outgoing_call] [ftmod_analog.c:62] 182116ms DIALING => BUSY [ftdm_analog_channel_run] [ftmod_analog.c:505] 5020ms BUSY => DOWN [ftdm_analog_channel_run] [ftmod_analog.c:802] 20ms DOWN => DIALING [analog_fxo_outgoing_call] [ftmod_analog.c:62] 29140ms DIALING => BUSY [ftdm_analog_channel_run] [ftmod_analog.c:505] 5020ms BUSY => DOWN [ftdm_analog_channel_run] [ftmod_analog.c:802] 20ms Time since last state change: 64974617ms This is for Indonesia line, but it usually works fine using us tone. On 10/01/2012 11:38 PM, Michael Collins wrote:
Look at line 107 of your paste: 2012-10-01 11:08:24.301591 [DEBUG] switch_ivr_originate.c:3508 Originate Resulted in Error Cause: 34 [NORMAL_CIRCUIT_CONGESTION]
For whatever reason mod_freetdm thinks that port is in use. Try "ftdm dump <span> <chan>" to see if there's any clues as to the state of the channel. Also, what country is this? Do you have your tones properly specified? -MC
On Mon, Oct 1, 2012 at 12:30 AM, William Alianto <william@xofap.com <mailto:william@xofap.com>> wrote:
I recently installed 2 spans of analog cards to my box. After all the configuration, I can already accept incoming from the FXO ports. But when I tried to do outbound call, it always fail. This is the dialplan I used for outgoing call
<extension name="freetdm" > <condition field="destination_number" expression="^9(\d+)$" > <action application="set" data="call_direction=outbound" /> <action application="set" data="hangup_after_bridge=true" /> <action application="bridge" data="freetdm/FXO1/4/$1" /> </condition> </extension>
And here is the log of the call
It seems that the dtmf was not delivered properly. Can anyone help me with this?
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Michael S Collins Twitter: @mercutioviz http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org