Hi to all, I am using following freetdm configuration file *freetdm.conf.xml* <config_profiles> <profile name="my_pri1"> <param name="outbound-called-ton" value="unknown"/> <param name="outbound-called-npi" value="unknown"/> <param name="outbound-rdnis-ton" value="unknown"/> <param name="outbound-rdnis-npi" value="unknown"/> <param name="outbound-calling-ton" value="unknown"/> <param name="outbound-calling-npi" value="unknown"/> <param name="switchtype" value="euroisdn" /> <param name="interface" value="cpe"/> </profile> </config_profiles> <sangoma_pri_spans> <span name="wp1" cfgprofile="my_pri1"> <param name="mode" value="user"/> <param name="context" value="default"/> <param name="dialplan" value="XML"/> </span> </sangoma_pri_spans> I can do outbound call. when I am trying to handle the incoming call, from PRI line call is not landing, When I check the fs_cli log files, it says that, 2010-11-17 02:10:16.853170 [INFO] mod_dialplan_xml.c:331 Processing <1234012480>->1100 in context 2010-11-17 02:10:16.853170 [WARNING] mod_dialplan_xml.c:361 Context not found 2010-11-17 02:10:16.853170 [INFO] switch_core_state_machine.c:142 No Route, Aborting 2010-11-17 02:10:16.853170 [DEBUG] switch_channel.c:2457 (FreeTDM/1:6/1100) Callstate Change RINGING -> HANGUP 2010-11-17 02:10:16.853170 [NOTICE] switch_core_state_machine.c:143 Hangup FreeTDM/1:6/1100 [CS_ROUTING] [NO_ROUTE_DESTINATION] Its not taking the context which is defined in the above configuration file. If I call 1100 from, sip phone call is landing properly. As of now, I have added my dial plan inside the /usr/local/freeswitch/conf/dialplan/default.xml. Previously it was working fine. After updating latest wanpipe and git version of freeSwitch, It stopped working. Any help would be appreciated. -- If you have come to help me, you are wasting your time. If you have come to because your liberation is bound up in mine, we can work together. Regards Venkatesan OV.