Hi to all,

I am using following freetdm configuration file

freetdm.conf.xml

        <config_profiles>
                        <profile name="my_pri1">
                                <param name="outbound-called-ton" value="unknown"/>
                                <param name="outbound-called-npi" value="unknown"/>
                                <param name="outbound-rdnis-ton" value="unknown"/>
                                <param name="outbound-rdnis-npi" value="unknown"/>
                                <param name="outbound-calling-ton" value="unknown"/>
                                <param name="outbound-calling-npi" value="unknown"/>
                                <param name="switchtype" value="euroisdn" />
                                <param name="interface" value="cpe"/>
                        </profile>
        </config_profiles>
        <sangoma_pri_spans>
                <span name="wp1" cfgprofile="my_pri1">
                        <param name="mode" value="user"/>
                        <param name="context" value="default"/>
                        <param name="dialplan" value="XML"/>
                </span>
        </sangoma_pri_spans>


I can do outbound call.
when I am trying to handle the incoming call,
from PRI line call is not landing,
When I check the fs_cli log files,
it says that,

2010-11-17 02:10:16.853170 [INFO] mod_dialplan_xml.c:331 Processing  <1234012480>->1100 in context
2010-11-17 02:10:16.853170 [WARNING] mod_dialplan_xml.c:361 Context  not found
2010-11-17 02:10:16.853170 [INFO] switch_core_state_machine.c:142 No Route, Aborting
2010-11-17 02:10:16.853170 [DEBUG] switch_channel.c:2457 (FreeTDM/1:6/1100) Callstate Change RINGING -> HANGUP
2010-11-17 02:10:16.853170 [NOTICE] switch_core_state_machine.c:143 Hangup FreeTDM/1:6/1100 [CS_ROUTING] [NO_ROUTE_DESTINATION]


Its not taking the context which is
defined in the above configuration file.

If I call 1100 from, sip phone call is landing
properly.


As of now, I have added my dial plan
inside the /usr/local/freeswitch/conf/dialplan/default.xml.
Previously it was working fine.

After updating latest wanpipe and git version of freeSwitch,
It stopped working.

Any help would be appreciated. 

--