Select signalling typeHi Frank. Thank you very much for your quick reply. I did not see anything like, frame type : CSS Here are my settings I have selected while configuring sangoma PRI Card . 1. Select media type I have selected *E1* 2. Select line coding I have selected *HDB3* 3. Select framing I have selected *CRC4* 4. Select clock I have selected *NORMAL* 5. Select Switchtype I have selected *EuroISDN/ETSI* 6. Select signalling type I have selected *PRI CPE *Still, When I check the *wanrouter status* Its says , Disconnected * * Thanks in advance, Regards, Venkat. * *On Tue, Mar 29, 2011 at 2:36 PM, Frank Ochere <ochere@gmail.com> wrote:
Venkat,
Pri Type EuroISDN CRC4 Enabled Coding HDB3 Framing Type CCS Timing Source set to Incoming Bearer Channels 1-15, 17-31 Data Channel 16
Regards
Frank
On Tue, Mar 29, 2011 at 11:52 AM, ovvenkat <ovvenkatesan@gmail.com> wrote:
Hi,
Any one please tell me, E1 line setting for kenyan E1 line.
Which *E1 Line coding* and *framing* I have to use it for kenyan E1 line.
My current setting works fine in India.
When I am trying to connect to kenyan E1 line, wanrouter status, says,
Device name | Protocol | Station | Status | wanpipe1 | AFT TE1 | N/A | Disconnected |
I know, its not related to freeswitch. But, I know no anyother place to get help on this. If anyone done this before in kenyan network please help me.
Regards, Venkat.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- If you have come to help me, you are wasting your time. If you have come to because your liberation is bound up in mine, we can work together. Regards Venkatesan OV.