Select signalling typeHi Frank.

Thank you very much for your quick reply.

I did not see anything like,

frame type : CSS

Here are my settings I have selected
while configuring sangoma PRI Card .

1. Select media type

I have selected E1

2. Select line coding

    I have selected HDB3

3. Select framing

    I have selected CRC4

4. Select clock

    I have selected NORMAL

5. Select Switchtype

   I have selected EuroISDN/ETSI

6. Select signalling type

   I have selected PRI CPE

Still, When I check the wanrouter status
Its says , Disconnected

Thanks in advance,

Regards,
Venkat.

On Tue, Mar 29, 2011 at 2:36 PM, Frank Ochere <ochere@gmail.com> wrote:

Venkat,

Pri Type EuroISDN
CRC4 Enabled
Coding HDB3
Framing Type CCS
Timing Source set to Incoming
Bearer Channels 1-15, 17-31
Data Channel 16

Regards

Frank

On Tue, Mar 29, 2011 at 11:52 AM, ovvenkat <ovvenkatesan@gmail.com> wrote:

Hi,

Any one please tell me,
E1 line setting for kenyan E1 line.

Which E1 Line coding and framing I have to use it for kenyan E1 line.

My current setting works fine in India.

When I am trying to connect to kenyan E1 line,
wanrouter status, says,

Device name | Protocol | Station | Status |
wanpipe1 | AFT TE1 | N/A | Disconnected |

I know, its not related to freeswitch.
But, I know no anyother place to get
help on this. If anyone done this before
in kenyan network please help me.

Regards,
Venkat.

_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

If you have come to help me, you are wasting your time.
If you have come to because your liberation is bound up in mine, we can work together.

Regards
Venkatesan OV.