Frank, sorry, I completely forgot one important detail: in the default conf, G729 is not allowed on any SIP profiles, so you have to modify vars.xml. You will find the following lines: <X-PRE-PROCESS cmd="set" data="global_codec_prefs=G7221@32000h,G7221@16000h,G722,PCMU,PCMA,GSM"/> <X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=PCMU,PCMA,G729"/> For now, I recommend you replace them by: <X-PRE-PROCESS cmd="set" data="global_codec_prefs=G729,PCMU,PCMA"/> <X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=G729,PCMU,PCMA"/> Then in FS console, do: sofia profile external restart reloadxml sofia profile internal restart reloadxml It should then work far better. What we did there is to make G729 an accepted codec in inbound INVITEs and a proposed codec for outbound INVITEs. Look in external.xml or internal.xml, and look at the variables inbound-codec-prefs and outbound-codec-prefs. David Ponzone Direction Technique email: david.ponzone@ipeva.fr tel: 01 74 03 18 97 gsm: 06 66 98 76 34 Service Client IPeva tel: 0811 46 26 26 www.ipeva.fr - www.ipeva-studio.com Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. IPeva décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur. Le 02/04/2010 à 14:30, David Ponzone a écrit :
Frank,
mod_g729 needs to be loaded, and then G729 needs to be negotiated on both legs. I really recommend you enable G729 on the Linksys, enable SIP trace on FS console: sofia profile external siptrace on sofia profile internal siptrace on
then make a (failing) call, capture the log on FS console and paste that to: http://pastebin:freeswitch@pastebin.freeswitch.org/
Then, send us back the link to your paste.
You can also join us on #freeswitch (irc.freenode.net), for some live help.
David Ponzone Direction Technique email: david.ponzone@ipeva.fr tel: 01 74 03 18 97 gsm: 06 66 98 76 34
Service Client IPeva tel: 0811 46 26 26 www.ipeva.fr - www.ipeva-studio.com
Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. IPeva décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur.
Le 02/04/2010 à 14:03, Frank Church a écrit :
On 2 April 2010 10:23, Jason White <jason@jasonjgw.net> wrote:
Frank Church <vfclists@googlemail.com> wrote:
I am just trialling Freeswitch with Linksys adapters, whose default codec I have set to G729 with 'Use Pref Codec Only:' set to no. When I change that setting to 'yes' the calls don't go through. I am using the latest Windows SVN.
FreeSWITCH only supports G.729 in pass-through mode (i.e., with bypass media enabled). Apparently you can buy a G.729 licence for FreeSWITCH if you really need it.
My recommendation would be to use a codec other than G.729 unless you have a compelling reason, for example a carrier that only supports G.729.
The carrier insists on G729, although they can accept G711. I think their call volume does not make it easy on them and their customers as well.
I did some googling and came up with freeswitch-codec-passthru- g729. I have also read http://wiki.freeswitch.org/wiki/Proxy_Media and http://wiki.freeswitch.org/wiki/Bypass_Media. In my module.conf.xml there is also <load module="mod_g729"/>.
Does that mean that my installlation is configured for pass thru if I make the right adjustments?
I have looked at http://www.mail-archive.com/freeswitch-users@lists.freeswitch.org/msg12303.h... and http://www.mail-archive.com/freeswitch-users@lists.freeswitch.org/msg20949.h... which speak of modifying the dialplan.
This is a basic freeswitch setup using the defaults. I just added the extensions to conf/directory/default and changed the provider in vars.xml and I want to be able to do the same in conf/dialplan/default.xml.
In conf/dialplan/default.xml the extension is matched by the destination. Is there an option for not falling through to other extensions if they also match?
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Frank Church
======================= http://devblog.brahmancreations.com
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org