Frank,

mod_g729 needs to be loaded, and then G729 needs to be negotiated on both legs.

I really recommend you enable G729 on the Linksys, enable SIP trace on FS console:

sofia profile external siptrace on

sofia profile internal siptrace on

then make a (failing) call, capture the log on FS console and paste that to:

http://pastebin:freeswitch@pastebin.freeswitch.org/

Then, send us back the link to your paste.

You can also join us on #freeswitch (irc.freenode.net), for some live help.

David Ponzone  Direction Technique

email: david.ponzone@ipeva.fr

tel:      01 74 03 18 97

gsm:   06 66 98 76 34

Service Client IPeva

tel:      0811 46 26 26

www.ipeva.fr  -   www.ipeva-studio.com

Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. IPeva décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur.

Le 02/04/2010 à 14:03, Frank Church a écrit :

On 2 April 2010 10:23, Jason White <jason@jasonjgw.net> wrote:

Frank Church <vfclists@googlemail.com> wrote:

I am just trialling Freeswitch with Linksys adapters, whose default

codec I have set to G729 with 'Use Pref Codec Only:' set to no.

When I change that setting to 'yes' the calls don't go through. I am

using the latest Windows SVN.

FreeSWITCH only supports G.729 in pass-through mode (i.e., with bypass media

enabled). Apparently you can buy a G.729 licence for FreeSWITCH if you really

need it.

My recommendation would be to use a codec other than G.729 unless you have a

compelling reason, for example a carrier that only supports G.729.

The carrier insists on G729, although they can accept G711. I think
their call volume does not make it easy on them and their customers as
well.

I did some googling and came up with freeswitch-codec-passthru-g729. I
have also read http://wiki.freeswitch.org/wiki/Proxy_Media and
http://wiki.freeswitch.org/wiki/Bypass_Media.
In my module.conf.xml there is also <load module="mod_g729"/>.

Does that mean that my installlation is configured for pass thru if I
make the right adjustments?

I have looked at
http://www.mail-archive.com/freeswitch-users@lists.freeswitch.org/msg12303.html
and http://www.mail-archive.com/freeswitch-users@lists.freeswitch.org/msg20949.html
which speak of modifying the dialplan.

This is a basic freeswitch setup using the defaults. I just added the
extensions to conf/directory/default and changed the provider in
vars.xml and I want to be able to do the same in
conf/dialplan/default.xml.

In conf/dialplan/default.xml the extension is matched by the
destination. Is there an option for not falling through to other
extensions if they also match?

_______________________________________________

FreeSWITCH-users mailing list

FreeSWITCH-users@lists.freeswitch.org

http://lists.freeswitch.org/mailman/listinfo/freeswitch-users

UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users

http://www.freeswitch.org

--
Frank Church

=======================
http://devblog.brahmancreations.com

_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org