This looks like a zaptel issue. Do we have any zaptel users familiar with this issue? If not you should probably check on the asterisk list for help. Once zaptel is working we can then see about getting openzap up. -MC Sent from my iPhone On Jan 12, 2009, at 6:36 AM, "Franziska Röhler" <curly2009@gmx.de> wrote:
I use q931 too.
openzap.conf.xml
<configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="0"/> <!--<param name="hold-music" value="$${moh_uri}"/>--> <!--<param name="enable-analog-option" value="call-swap"/>--> <!--<param name="enable-analog-option" value="3-way"/>--> </settings> <!-- one entry here per openzap span --> <pri_spans> <span id="1"> <param name="mode" value="user"/> <param name="dialect" value="q931"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> </span> </pri_spans> </configuration>
openzap.conf
[span zt] name => OpenZap number => 1 trunk_type => e1 b-channel => 1-15, 17-31 d-channel => 16
cat /proc/zaptel/* Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" (MASTER) HDB3/ CCS/CRC4 RECOVERING
1 WCT1/0/1 Clear (In use) RED 2 WCT1/0/2 Clear (In use) RED 3 WCT1/0/3 Clear (In use) RED 4 WCT1/0/4 Clear (In use) RED 5 WCT1/0/5 Clear (In use) RED 6 WCT1/0/6 Clear (In use) RED 7 WCT1/0/7 Clear (In use) RED 8 WCT1/0/8 Clear (In use) RED 9 WCT1/0/9 Clear (In use) RED 10 WCT1/0/10 Clear (In use) RED 11 WCT1/0/11 Clear (In use) RED 12 WCT1/0/12 Clear (In use) RED 13 WCT1/0/13 Clear (In use) RED 14 WCT1/0/14 Clear (In use) RED 15 WCT1/0/15 Clear (In use) RED 16 WCT1/0/16 HDLCFCS (In use) RED 17 WCT1/0/17 Clear (In use) RED 18 WCT1/0/18 Clear (In use) RED 19 WCT1/0/19 Clear (In use) RED 20 WCT1/0/20 Clear (In use) RED 21 WCT1/0/21 Clear (In use) RED 22 WCT1/0/22 Clear (In use) RED 23 WCT1/0/23 Clear (In use) RED 24 WCT1/0/24 Clear (In use) RED 25 WCT1/0/25 Clear (In use) RED 26 WCT1/0/26 Clear (In use) RED 27 WCT1/0/27 Clear (In use) RD 28 WCT1/0/28 Clear (In use) RED 29 WCT1/0/29 Clear (In use) RED 30 WCT1/0/30 Clear (In use) RED 31 WCT1/0/31 Clear (In use) RED
Why is it RED? zttool shows no alarms (ok) and ztfcg -vv shows that 31 Channels to configure.
I had the same problem a while ago with German PRI lines (S2M).
Do you have <param name="dialect" value="q931"/> in your openzap.conf.xml?
In older Versions of openzap I used euro, in newer releases this didn't work any more, so I used q931.
If this is not successfull,
can you post your openzap.conf.xml and openzap.xml and the output of cat /proc/zaptel/*
Best regards Peter
curly2009@gmx.de schrieb:
Hello,
I'm a newbie in FS.
I installed and configure Openzap and Zaptel. I have a PRI Digium Wildcard TE110P.
When I call a number then I get an Error!
2009-01-12 10:20:01 [CRIT] zap_io.c:804 zap_channel_open_any() All circuits are busy. 2009-01-12 10:20:01 [ERR] mod_openzap.c:910 channel_outgoing_channel() No channels available 2009-01-12 10:20:01 [ERR] switch_ivr_originate.c:926 switch_ivr_originate() Cannot create outgoing channel of type [openzap] cause: [DESTINATION_OUT_OF_ORDER]
What's wrong? Do you need any configurations?
Thanks! Best Regards, Curly
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org