line coding should be hdb3 framing can be either crc4 or ncrc4 depending on what the other side has set its most probably a cable fault, have then give you a loop from far end set your clock to master and you should get e1 up, if not, then the issue is in the cable and should be resolved first -wasim On Tue, Mar 29, 2011 at 13:52, ovvenkat <ovvenkatesan@gmail.com> wrote:
Hi,
Any one please tell me, E1 line setting for kenyan E1 line.
Which *E1 Line coding* and *framing* I have to use it for kenyan E1 line.
My current setting works fine in India.
When I am trying to connect to kenyan E1 line, wanrouter status, says,
Device name | Protocol | Station | Status | wanpipe1 | AFT TE1 | N/A | Disconnected |
I know, its not related to freeswitch. But, I know no anyother place to get help on this. If anyone done this before in kenyan network please help me.
Regards, Venkat.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- wasim h. baig | principal consultant | convergence pk | +92 30 0850 8070 | peace be upon you ...