line coding should be hdb3framing can be either crc4 or ncrc4 depending on what the other side has set
its most probably a cable fault, have then give you a loop from far end
set your clock to master and you should get e1 up, if not, then the issue is in the cable
and should be resolved first
-wasim
On Tue, Mar 29, 2011 at 13:52, ovvenkat
<ovvenkatesan@gmail.com> wrote:
Hi,
Any one please tell me,
E1 line setting for kenyan E1 line.
Which E1 Line coding and framing I have to use it for kenyan E1 line.
My current setting works fine in India.
When I am trying to connect to kenyan E1 line,
wanrouter status, says,
Device name | Protocol | Station | Status |
wanpipe1 | AFT TE1 | N/A | Disconnected |
I know, its not related to freeswitch.
But, I know no anyother place to get
help on this. If anyone done this before
in kenyan network please help me.
Regards,
Venkat.
_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
--
wasim h. baig | principal consultant | convergence pk | +92 30 0850 8070 | peace be upon you ...