You want to have ext-sip-ip and ext-rtp-ip the same as sip-ip and rtp-ip. Those settings are to handle some NAT situations where you're listening on your LAN IP but outside are visible on your nated WAN IP.
From what you descibed your box is assigned your external address directly in which case you need 2 profiles
On 31 March 2015 at 16:59, T Fred Farmington <tfred31@yahoo.com> wrote:
OK
Within the file: conf/directory/default.xml I specifically defined the <domain name="192.168.nn.nn"> to be the 'inside' IP which the SIP phones are to use.
And in the conf/sip_profiles/internal.xml I defined sip-ip <== 'inside' IP rtp-ip <== 'inside' IP
ext-sip-ip <== 'outside' IP ext-rtp-ip <== 'outside' IP
Just in case I also put the same definitions into conf/sip_profiles/external.xml
After a FS ReStart I still only see FS_CLI (sofia status) referring to the 'outside' IP
And on doing a ReStart of the SIP phone, I still get the same error message as before as seen on FS_CLI Can't find user [105@192.168.nn.nn] from <the phone's IP address> You must define a domain called <FS 'inside' IP address 192.168.nn.nn> in your directory and add a user with the ID '105' attribute and you must configure your device to use the proper domain in its authentication credentials
Obviously I am still missing something.
Suggestions?
Thanks TF
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org