You want to have ext-sip-ip and ext-rtp-ip the same as sip-ip and rtp-ip. Those settings are to handle some NAT situations where you're listening on your LAN IP but outside are visible on your nated WAN IP.

From what you descibed your box is assigned your external address directly in which case you need 2 profiles

On 31 March 2015 at 16:59, T Fred Farmington <tfred31@yahoo.com> wrote:
OK

Within the file:   conf/directory/default.xml    I specifically defined the   <domain name="192.168.nn.nn">    to be the 'inside' IP which the SIP phones are to use.

And in the  conf/sip_profiles/internal.xml    I defined
       sip-ip  <==  'inside' IP
       rtp-ip  <==  'inside' IP

      ext-sip-ip   <==  'outside' IP
      ext-rtp-ip   <==  'outside' IP

Just in case I also put the same definitions into   conf/sip_profiles/external.xml

After a FS ReStart I still only see FS_CLI (sofia status) referring to the 'outside'  IP

And on doing a ReStart of the SIP phone, I still get the same error message as before as seen on FS_CLI
      Can't find user [105@192.168.nn.nn]  from <the phone's IP address>
      You must define a domain called  <FS 'inside' IP address 192.168.nn.nn>  in your directory and add a user with the ID '105' attribute
      and you must configure your device to use the proper domain in its authentication credentials

Obviously I am still missing something.

Suggestions?

Thanks
TF


_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://confluence.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org