Mike, I am using a fully patched Windows XP. Many thanks, Jason _____ From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: 13 April 2007 16:29 To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] My first call I will take a look at this today. What OS/version are you using again? Mike _____ From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Jason Steele Sent: Friday, April 13, 2007 7:01 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] My first call Jonas, Thanks for your reply. I checked that the system at conference.freeswitch.org was up and running. When you say "try adding some actions" do you mean to the call plan for 1234? During initialisation the following is shown in the console: Pa_GetDeviceInfo: Num input channels reported as 65535! Changed to 2. Pa_GetDeviceInfo: Num input channels reported as 65535! Changed to 2. Pa_GetDeviceInfo: Num output channels reported as 65535! Changed to 2. Pa_GetDeviceInfo: Num output channels reported as 65535! Changed to 2. And also: 2007-04-13 11:30:15 [ERR] mod_portaudio.c:1030 load_config() Invalid ring device configured using output device! 2007-04-13 11:30:15 [CONSOLE] switch_loadable_module.c:453 switch_loadable_module_load_file() Successfully Loaded [mod_p ortaudio] 2007-04-13 11:30:15 [DEBUG] mod_portaudio.c:895 switch_module_load() Input Device: 0, Output Device: 3, Ring Device: 3 S ample Rate: 8000 MS: 20 Do these look right? Many thanks, Jason _____ From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Jonas Gauffin Sent: 12 April 2007 15:43 To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] My first call The default dialplan will divert calls to the conference system at freeswitch.org. that system may have been down when you tried. try adding some actions which plays sound files instead. Action should be " playback", and data should be the full path to a wave file