Mike,
I am using a fully patched Windows XP.
Many thanks,
Jason
From:
freeswitch-users-bounces@lists.freeswitch.org
[mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris
Sent: 13 April 2007 16:29
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] My
first call
I will take a look at
this today. What OS/version are you using again?
Mike
From:
freeswitch-users-bounces@lists.freeswitch.org
[mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Jason Steele
Sent: Friday, April 13, 2007 7:01
AM
To:
Subject: Re: [Freeswitch-users] My
first call
Jonas,
Thanks for your reply.
I checked that the system at
conference.freeswitch.org was up and running.
When you say “try adding some
actions” do you mean to the call plan for 1234?
During initialisation the following is
shown in the console:
Pa_GetDeviceInfo: Num input channels
reported as 65535! Changed to 2.
Pa_GetDeviceInfo: Num input channels
reported as 65535! Changed to 2.
Pa_GetDeviceInfo: Num output channels reported
as 65535! Changed to 2.
Pa_GetDeviceInfo: Num output channels
reported as 65535! Changed to 2.
And also:
2007-04-13 11:30:15 [ERR]
mod_portaudio.c:1030 load_config() Invalid ring device configured using output
device!
2007-04-13 11:30:15 [CONSOLE] switch_loadable_module.c:453
switch_loadable_module_load_file() Successfully Loaded [mod_p
ortaudio]
2007-04-13 11:30:15 [DEBUG]
mod_portaudio.c:895 switch_module_load() Input Device: 0, Output Device: 3,
Ring Device: 3 S
ample Rate: 8000 MS: 20
Do these look right?
Many thanks,
Jason
From:
freeswitch-users-bounces@lists.freeswitch.org
[mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Jonas Gauffin
Sent: 12 April 2007 15:43
To:
Subject: Re: [Freeswitch-users] My
first call
The default dialplan will
divert calls to the conference system at freeswitch.org.
that system may have been down when you tried.
try adding some actions which plays sound files instead. Action should be
" playback", and data
should be the full path to a wave file