[Freeswitch-users] mod_verto and vc are not working

[Michael Jerris]

do you have mod_rtc loaded?

On Friday, August 26, 2016, Alexander Haugg <Alexander.Haugg at c4b.de> wrote:

> I was installing this setup:
>
> https://freeswitch.org/confluence/display/FREESWITCH/
> Debian+8+Jessie#Debian8Jessie-Scriptinstallfreeswitchdemowit
> hverto_communicator
>
>
>
> The problem is, the client 1008 calls the client 1010 and the client 1010
> do answer.
>
> The signaling part is connected successfully.
>
> But client 1008 and 1010 show the black video field only and voice is
> don’t working too.
>
>
>
> In the wireshark trace on the freeswitch host I can see, the freeswitch
> received from the client 1008 and 1010 the rtp streams, but he send the
> streams not to the other side. I can’t see any outbound rtp streams.
>
>
>
> The only one error message in the CLI output is:
>
> 2016-08-26 11:37:59.642048 [ERR] switch_core_session.c:511 Could not
> locate channel type
>
>
>
> FreeSWITCH Version 1.6.9-16-d574870~64bit (-16-d574870 64bit) on Debian 8.5
>
> The config is default with the adapted IPs
>
>
>
> What can I do to locate the Problem?
>
>
>
>
>
>
>
> *Von:* freeswitch-users-bounces at lists.freeswitch.org
> <javascript:_e(%7B%7D,'cvml','freeswitch-users-bounces at lists.freeswitch.org');>
> [mailto:freeswitch-users-bounces at lists.freeswitch.org
> <javascript:_e(%7B%7D,'cvml','freeswitch-users-bounces at lists.freeswitch.org');>]
> *Im Auftrag von *Alexander Haugg
> *Gesendet:* Donnerstag, 25. August 2016 14:39
> *An:* FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org
> <javascript:_e(%7B%7D,'cvml','freeswitch-users at lists.freeswitch.org');>>
> *Betreff:* Re: [Freeswitch-users] mod_verto and
> https://webrtc.freeswitch.org/verto/index.html#page-main
>
>
>
> Thanks a lot, that’s the solution.
>
>
>
> *Von:* freeswitch-users-bounces at lists.freeswitch.org
> <javascript:_e(%7B%7D,'cvml','freeswitch-users-bounces at lists.freeswitch.org');>
> [mailto:freeswitch-users-bounces at lists.freeswitch.org
> <javascript:_e(%7B%7D,'cvml','freeswitch-users-bounces at lists.freeswitch.org');>]
> *Im Auftrag von *Marcel Haldemann
> *Gesendet:* Mittwoch, 24. August 2016 18:03
> *An:* FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org
> <javascript:_e(%7B%7D,'cvml','freeswitch-users at lists.freeswitch.org');>>
> *Betreff:* Re: [Freeswitch-users] mod_verto and
> https://webrtc.freeswitch.org/verto/index.html#page-main
>
>
>
> If u start to play with webrtc and Freeswitch I’d recommend to install FS
> + cert + verto communicator using the script here:
>
>
>
> https://freeswitch.org/confluence/display/FREESWITCH/
> Debian+8+Jessie#Debian8Jessie-Scriptinstallfreeswitchdemowit
> hverto_communicator
>
>
>
> note: change hostname and ip in the script.
>
>
>
> Then just go to   “https://yourhostname.com/vc” and you should have a
> working verto server and client.
>
>
>
> Note: change the default password to get rid of the 10 sec delay or remove
> the delay in the dial plan.
>
>
>
>
>
> *Von:* freeswitch-users-bounces at lists.freeswitch.org
> <javascript:_e(%7B%7D,'cvml','freeswitch-users-bounces at lists.freeswitch.org');>
> [mailto:freeswitch-users-bounces at lists.freeswitch.org
> <javascript:_e(%7B%7D,'cvml','freeswitch-users-bounces at lists.freeswitch.org');>]
> *Im Auftrag von *Alexander Haugg
> *Gesendet:* Mittwoch, 24. August 2016 15:24
> *An:* FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org
> <javascript:_e(%7B%7D,'cvml','freeswitch-users at lists.freeswitch.org');>>
> *Betreff:* [Freeswitch-users] mod_verto and https://webrtc.freeswitch.org/
> verto/index.html#page-main
>
>
>
> Hi,
>
>
>
> it is my first time with mod_verto.
>
> The certificate is generated like described here:
> https://webrtc.freeswitch.org/verto/index.html#page-main
>
> And the ca.crt is installed on the client pc. But the following error
> message is again:
>
>
>
> 2016-08-24 15:03:47.044880 [INFO] mod_verto.c:4025 192.168.241.2:43246
> Client Connect.
>
> 2016-08-24 15:03:47.044880 [INFO] mod_verto.c:1978 192.168.241.2:43246
> Starting client thread.
>
> 2016-08-24 15:03:47.084876 [DEBUG] mod_verto.c:1825 192.168.241.2:43246
> WS SETUP FAILED []
>
> 2016-08-24 15:03:47.084876 [INFO] mod_verto.c:2005 192.168.241.2:43246
> Ending client thread.
>
> 2016-08-24 15:03:47.084876 [INFO] mod_verto.c:2013 192.168.241.2:43246
> Thread ended
>
>
>
> What can I do? Is the certificate the problem?
>
> The Client PC and the Freeswitch PC are in the same Network Cluster.
>
> The Freeswitch PC is a Debian 8.5 system.
>
>
>
> Thanks a lot
>
> Alex
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20160826/18d7c334/attachment-0001.html