[Freeswitch-users] mod_verto and vc are not working

[Mirko Brankovic]

Sounds like the setup of wss failed due to the cert problem most likely.

What browser and version are you using and wjat version of openssl on that
debian box, is it 7 or 8?

On Aug 26, 2016 6:46 PM, "Michael Jerris" <mike at jerris.com> wrote:

> do you have mod_rtc loaded?
>
> On Friday, August 26, 2016, Alexander Haugg <Alexander.Haugg at c4b.de>
> wrote:
>
>> I was installing this setup:
>>
>> https://freeswitch.org/confluence/display/FREESWITCH/Debian+
>> 8+Jessie#Debian8Jessie-Scriptinstallfreeswitchdemowithverto_communicator
>>
>>
>>
>> The problem is, the client 1008 calls the client 1010 and the client 1010
>> do answer.
>>
>> The signaling part is connected successfully.
>>
>> But client 1008 and 1010 show the black video field only and voice is
>> don’t working too.
>>
>>
>>
>> In the wireshark trace on the freeswitch host I can see, the freeswitch
>> received from the client 1008 and 1010 the rtp streams, but he send the
>> streams not to the other side. I can’t see any outbound rtp streams.
>>
>>
>>
>> The only one error message in the CLI output is:
>>
>> 2016-08-26 11:37:59.642048 [ERR] switch_core_session.c:511 Could not
>> locate channel type
>>
>>
>>
>> FreeSWITCH Version 1.6.9-16-d574870~64bit (-16-d574870 64bit) on Debian
>> 8.5
>>
>> The config is default with the adapted IPs
>>
>>
>>
>> What can I do to locate the Problem?
>>
>>
>>
>>
>>
>>
>>
>> *Von:* freeswitch-users-bounces at lists.freeswitch.org [mailto:
>> freeswitch-users-bounces at lists.freeswitch.org] *Im Auftrag von *Alexander
>> Haugg
>> *Gesendet:* Donnerstag, 25. August 2016 14:39
>> *An:* FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
>> *Betreff:* Re: [Freeswitch-users] mod_verto and
>> https://webrtc.freeswitch.org/verto/index.html#page-main
>>
>>
>>
>> Thanks a lot, that’s the solution.
>>
>>
>>
>> *Von:* freeswitch-users-bounces at lists.freeswitch.org [
>> mailto:freeswitch-users-bounces at lists.freeswitch.org] *Im Auftrag von *Marcel
>> Haldemann
>> *Gesendet:* Mittwoch, 24. August 2016 18:03
>> *An:* FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
>> *Betreff:* Re: [Freeswitch-users] mod_verto and
>> https://webrtc.freeswitch.org/verto/index.html#page-main
>>
>>
>>
>> If u start to play with webrtc and Freeswitch I’d recommend to install FS
>> + cert + verto communicator using the script here:
>>
>>
>>
>> https://freeswitch.org/confluence/display/FREESWITCH/Debian+
>> 8+Jessie#Debian8Jessie-Scriptinstallfreeswitchdemowithverto_communicator
>>
>>
>>
>> note: change hostname and ip in the script.
>>
>>
>>
>> Then just go to   “https://yourhostname.com/vc” and you should have a
>> working verto server and client.
>>
>>
>>
>> Note: change the default password to get rid of the 10 sec delay or
>> remove the delay in the dial plan.
>>
>>
>>
>>
>>
>> *Von:* freeswitch-users-bounces at lists.freeswitch.org [
>> mailto:freeswitch-users-bounces at lists.freeswitch.org] *Im Auftrag von *Alexander
>> Haugg
>> *Gesendet:* Mittwoch, 24. August 2016 15:24
>> *An:* FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
>> *Betreff:* [Freeswitch-users] mod_verto and
>> https://webrtc.freeswitch.org/verto/index.html#page-main
>>
>>
>>
>> Hi,
>>
>>
>>
>> it is my first time with mod_verto.
>>
>> The certificate is generated like described here:
>> https://webrtc.freeswitch.org/verto/index.html#page-main
>>
>> And the ca.crt is installed on the client pc. But the following error
>> message is again:
>>
>>
>>
>> 2016-08-24 15:03:47.044880 [INFO] mod_verto.c:4025 192.168.241.2:43246
>> Client Connect.
>>
>> 2016-08-24 15:03:47.044880 [INFO] mod_verto.c:1978 192.168.241.2:43246
>> Starting client thread.
>>
>> 2016-08-24 15:03:47.084876 [DEBUG] mod_verto.c:1825 192.168.241.2:43246
>> WS SETUP FAILED []
>>
>> 2016-08-24 15:03:47.084876 [INFO] mod_verto.c:2005 192.168.241.2:43246
>> Ending client thread.
>>
>> 2016-08-24 15:03:47.084876 [INFO] mod_verto.c:2013 192.168.241.2:43246
>> Thread ended
>>
>>
>>
>> What can I do? Is the certificate the problem?
>>
>> The Client PC and the Freeswitch PC are in the same Network Cluster.
>>
>> The Freeswitch PC is a Debian 8.5 system.
>>
>>
>>
>> Thanks a lot
>>
>> Alex
>>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20160826/a5d5bb3e/attachment-0001.html