[Freeswitch-users] mod_verto and vc are not working

[Alexander Haugg]

Yes it was loaded.
Now it is working, I don’t know why, I change the hardware Settings (Micro, Camera, …) and then it works.

Von: freeswitch-users-bounces at lists.freeswitch.org [mailto:freeswitch-users-bounces at lists.freeswitch.org] Im Auftrag von Ítalo Rossi
Gesendet: Freitag, 26. August 2016 16:49
An: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
Betreff: Re: [Freeswitch-users] mod_verto and vc are not working

Do you have mod_rtc loaded?

On Fri, Aug 26, 2016 at 6:45 AM, Alexander Haugg <Alexander.Haugg at c4b.de<mailto:Alexander.Haugg at c4b.de>> wrote:
I was installing this setup:
https://freeswitch.org/confluence/display/FREESWITCH/Debian+8+Jessie#Debian8Jessie-Scriptinstallfreeswitchdemowithverto_communicator

The problem is, the client 1008 calls the client 1010 and the client 1010 do answer.
The signaling part is connected successfully.
But client 1008 and 1010 show the black video field only and voice is don’t working too.

In the wireshark trace on the freeswitch host I can see, the freeswitch received from the client 1008 and 1010 the rtp streams, but he send the streams not to the other side. I can’t see any outbound rtp streams.

The only one error message in the CLI output is:
2016-08-26 11:37:59.642048 [ERR] switch_core_session.c:511 Could not locate channel type

FreeSWITCH Version 1.6.9-16-d574870~64bit (-16-d574870 64bit) on Debian 8.5
The config is default with the adapted IPs

What can I do to locate the Problem?



Von: freeswitch-users-bounces at lists.freeswitch.org<mailto:freeswitch-users-bounces at lists.freeswitch.org> [mailto:freeswitch-users-bounces at lists.freeswitch.org<mailto:freeswitch-users-bounces at lists.freeswitch.org>] Im Auftrag von Alexander Haugg
Gesendet: Donnerstag, 25. August 2016 14:39
An: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org<mailto:freeswitch-users at lists.freeswitch.org>>
Betreff: Re: [Freeswitch-users] mod_verto and https://webrtc.freeswitch.org/verto/index.html#page-main

Thanks a lot, that’s the solution.

Von: freeswitch-users-bounces at lists.freeswitch.org<mailto:freeswitch-users-bounces at lists.freeswitch.org> [mailto:freeswitch-users-bounces at lists.freeswitch.org] Im Auftrag von Marcel Haldemann
Gesendet: Mittwoch, 24. August 2016 18:03
An: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org<mailto:freeswitch-users at lists.freeswitch.org>>
Betreff: Re: [Freeswitch-users] mod_verto and https://webrtc.freeswitch.org/verto/index.html#page-main

If u start to play with webrtc and Freeswitch I’d recommend to install FS + cert + verto communicator using the script here:

https://freeswitch.org/confluence/display/FREESWITCH/Debian+8+Jessie#Debian8Jessie-Scriptinstallfreeswitchdemowithverto_communicator

note: change hostname and ip in the script.

Then just go to   “https://yourhostname.com/vc” and you should have a working verto server and client.

Note: change the default password to get rid of the 10 sec delay or remove the delay in the dial plan.


Von: freeswitch-users-bounces at lists.freeswitch.org<mailto:freeswitch-users-bounces at lists.freeswitch.org> [mailto:freeswitch-users-bounces at lists.freeswitch.org] Im Auftrag von Alexander Haugg
Gesendet: Mittwoch, 24. August 2016 15:24
An: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org<mailto:freeswitch-users at lists.freeswitch.org>>
Betreff: [Freeswitch-users] mod_verto and https://webrtc.freeswitch.org/verto/index.html#page-main

Hi,

it is my first time with mod_verto.
The certificate is generated like described here: https://webrtc.freeswitch.org/verto/index.html#page-main
And the ca.crt is installed on the client pc. But the following error message is again:

2016-08-24 15:03:47.044880 [INFO] mod_verto.c:4025 192.168.241.2:43246<http://192.168.241.2:43246> Client Connect.
2016-08-24 15:03:47.044880 [INFO] mod_verto.c:1978 192.168.241.2:43246<http://192.168.241.2:43246> Starting client thread.
2016-08-24 15:03:47.084876 [DEBUG] mod_verto.c:1825 192.168.241.2:43246<http://192.168.241.2:43246> WS SETUP FAILED []
2016-08-24 15:03:47.084876 [INFO] mod_verto.c:2005 192.168.241.2:43246<http://192.168.241.2:43246> Ending client thread.
2016-08-24 15:03:47.084876 [INFO] mod_verto.c:2013 192.168.241.2:43246<http://192.168.241.2:43246> Thread ended

What can I do? Is the certificate the problem?
The Client PC and the Freeswitch PC are in the same Network Cluster.
The Freeswitch PC is a Debian 8.5 system.

Thanks a lot
Alex

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting at freeswitch.org<mailto:consulting at freeswitch.org>
http://www.freeswitchsolutions.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://confluence.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org



--
Ítalo Rossi
italo at freeswitch.org<mailto:italo at freeswitch.org>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20160829/778598f3/attachment-0001.html