[Freeswitch-users] FreeTDM kickstart help ERRORS inline

Wed Sep 21 17:41:39 MSD 2011

Return the astribanks!! Stay away from xorcom. Once you do get them up
you will have MWI issues. Best thing to do is to go with grandstream
gateways. They are 1/3 the price and easy to set up. Also if one of
your astribanks fails (I've had 3 fail) all your astribanks are down
until you get them to over night you a new one (at your cost) then you
need to configure it again!!

Sent from my mobile device.

On Sep 20, 2011, at 10:59 PM, Luis F Urrea <lfurrea at gmail.com> wrote:

> This dAHDI stuff is like voodoo!
>
> I know this has to be configuration issues but sh****t after a few years in the telecom industry it is really hard to find a more awful syntax for configuring such a stupid device as an FXO port.
>
> I am trying to get a Xorcom Astribank going with FreeTDM. So far after a bunch of firmware and driver BS (come on there is probably nothing more buggy in a freking kernel than the USB layer, how can a telecom device be using a USB driver!!!!!!!).
>
> I get the following output from
>
> #lsdahdi
> ### Span  1: XBUS-00/XPD-00 "Xorcom XPD #00/00: FXO" (MASTER)
>   1 FXO                     RED
>   2 FXO                     RED
>   3 FXO                     RED
>   4 FXO                     RED
>   5 FXO                     RED
>   6 FXO                     RED
>   7 FXO                     RED
>   8 FXO                     RED
> ### Span  2: XBUS-00/XPD-10 "Xorcom XPD #00/10: FXO"
>   9 FXO                     RED
>  10 FXO                     RED
>  11 FXO                     RED
>  12 FXO                     RED
>  13 FXO                     RED
>  14 FXO                     RED
>  15 FXO                     RED
>  16 FXO                    (battery)
> ### Span  3: XBUS-00/XPD-20 "Xorcom XPD #00/20: FXO"
>  17 FXO                     RED
>  18 FXO                    (battery)
>  19 FXO                    (battery)
>  20 FXO                    (battery)
>  21 FXO                    (battery)
>  22 FXO                    (battery)
>  23 FXO                    (battery)
>  24 FXO                    (battery)
>
> But when loading mod_freetdm I am getting:
>
> 2011-09-19 15:44:03.149105 [NOTICE] ftdm_io.c:5723 Modules configured: 1
> 2011-09-19 15:44:03.149105 [DEBUG] ftdm_config.c:80 Configuration file is /usr/local/freeswitch/conf/freetdm.conf.
> 2011-09-19 15:44:03.149105 [DEBUG] ftdm_io.c:4633 Reading FreeTDM configuration file
> 2011-09-19 15:44:03.149105 [DEBUG] ftdm_io.c:4649 found config for span
> 2011-09-19 15:44:03.149105 [NOTICE] ftmod_zt.c:1323 Using DAHDI control device
> 2011-09-19 15:44:03.149105 [INFO] ftdm_io.c:4963 Loading IO from /usr/local/freeswitch/mod/ftmod_zt.so [zt]
> 2011-09-19 15:44:03.149105 [DEBUG] ftdm_config.c:80 Configuration file is /usr/local/freeswitch/conf/zt.conf.
> 2011-09-19 15:44:03.149105 [INFO] ftmod_zt.c:585 Setting rxgain val to 0.000000
> 2011-09-19 15:44:03.149105 [INFO] ftmod_zt.c:593 Setting txgain val to 0.000000
> 2011-09-19 15:44:03.149105 [INFO] ftdm_io.c:787 Auto-loaded I/O module 'zt'
> 2011-09-19 15:44:03.149105 [DEBUG] ftdm_io.c:4670 created span 1 (SPAN1) of type zt
> 2011-09-19 15:44:03.149105 [DEBUG] ftdm_io.c:4688 span 1 [fxo-channel]=[17-24]
> 2011-09-19 15:44:03.149105 [DEBUG] ftdm_io.c:4718 setting trunk type to 'FXO' start(KEWL)
> 2011-09-19 15:44:03.149105 [ERR] ftmod_zt.c:288 failure configuring device /dev/dahdi/channel chan 17 fd 48 (No such device or address)
> 2011-09-19 15:44:03.149105 [ERR] ftmod_zt.c:288 failure configuring device /dev/dahdi/channel chan 18 fd 48 (No such device or address)
> 2011-09-19 15:44:03.149105 [ERR] ftmod_zt.c:288 failure configuring device /dev/dahdi/channel chan 19 fd 48 (No such device or address)
> 2011-09-19 15:44:03.149105 [ERR] ftmod_zt.c:288 failure configuring device /dev/dahdi/channel chan 20 fd 48 (No such device or address)
> 2011-09-19 15:44:03.149105 [ERR] ftmod_zt.c:288 failure configuring device /dev/dahdi/channel chan 21 fd 48 (No such device or address)
> 2011-09-19 15:44:03.149105 [ERR] ftmod_zt.c:288 failure configuring device /dev/dahdi/channel chan 22 fd 48 (No such device or address)
> 2011-09-19 15:44:03.149105 [ERR] ftmod_zt.c:288 failure configuring device /dev/dahdi/channel chan 23 fd 48 (No such device or address)
> 2011-09-19 15:44:03.149105 [ERR] ftmod_zt.c:288 failure configuring device /dev/dahdi/channel chan 24 fd 48 (No such device or address)
> 2011-09-19 15:44:03.149105 [ERR] ftdm_io.c:4579 1:Failed to configure span
> 2011-09-19 15:44:03.149105 [INFO] ftdm_io.c:4885 Configured 0 channel(s)
> 2011-09-19 15:44:03.149105 [ERR] ftdm_io.c:5733 FreeTDM global configuration failed!
> 2011-09-19 15:44:03.149105 [ERR] mod_freetdm.c:4805 Error configuring FreeTDM
> 2011-09-19 15:44:03.149105 [INFO] switch_time.c:1028 Timezone reloaded 530 definitions
> 2011-09-19 15:44:03.149105 [CRIT] switch_loadable_module.c:1019 Error Loading module /usr/local/freeswitch/mod/mod_freetdm.so
> **Module load routine returned an error**
> 2011-09-19 15:44:03.149105 [NOTICE] ftdm_sched.c:147 Main scheduling thread going out ...
>
>
> Thanks in advance and sorry for the rant.
>
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org