[Freeswitch-users] FreeTDM kickstart help ERRORS inline
Luis F Urrea
lfurrea at gmail.com
Wed Sep 21 23:53:32 MSD 2011
Hahahaha
I wish o could convince my customer to do so.
Grandstream, Audiocodes, Patton, you name it, but good old SIP communication
over the network!
But it's a requirement for the project.
Any input is welcome I don't want to be spoon fed but it looks like all this
dahdi configuration is most of the times generated by scripts and not even
documented.
On Wed, Sep 21, 2011 at 7:41 AM, Gilad Abada <ga at steadfasttelecom.com>wrote:
> Return the astribanks!! Stay away from xorcom. Once you do get them up
> you will have MWI issues. Best thing to do is to go with grandstream
> gateways. They are 1/3 the price and easy to set up. Also if one of
> your astribanks fails (I've had 3 fail) all your astribanks are down
> until you get them to over night you a new one (at your cost) then you
> need to configure it again!!
>
> Sent from my mobile device.
>
> On Sep 20, 2011, at 10:59 PM, Luis F Urrea <lfurrea at gmail.com> wrote:
>
> > This dAHDI stuff is like voodoo!
> >
> > I know this has to be configuration issues but sh****t after a few years
> in the telecom industry it is really hard to find a more awful syntax for
> configuring such a stupid device as an FXO port.
> >
> > I am trying to get a Xorcom Astribank going with FreeTDM. So far after a
> bunch of firmware and driver BS (come on there is probably nothing more
> buggy in a freking kernel than the USB layer, how can a telecom device be
> using a USB driver!!!!!!!).
> >
> > I get the following output from
> >
> > #lsdahdi
> > ### Span 1: XBUS-00/XPD-00 "Xorcom XPD #00/00: FXO" (MASTER)
> > 1 FXO RED
> > 2 FXO RED
> > 3 FXO RED
> > 4 FXO RED
> > 5 FXO RED
> > 6 FXO RED
> > 7 FXO RED
> > 8 FXO RED
> > ### Span 2: XBUS-00/XPD-10 "Xorcom XPD #00/10: FXO"
> > 9 FXO RED
> > 10 FXO RED
> > 11 FXO RED
> > 12 FXO RED
> > 13 FXO RED
> > 14 FXO RED
> > 15 FXO RED
> > 16 FXO (battery)
> > ### Span 3: XBUS-00/XPD-20 "Xorcom XPD #00/20: FXO"
> > 17 FXO RED
> > 18 FXO (battery)
> > 19 FXO (battery)
> > 20 FXO (battery)
> > 21 FXO (battery)
> > 22 FXO (battery)
> > 23 FXO (battery)
> > 24 FXO (battery)
> >
> > But when loading mod_freetdm I am getting:
> >
> > 2011-09-19 15:44:03.149105 [NOTICE] ftdm_io.c:5723 Modules configured: 1
> > 2011-09-19 15:44:03.149105 [DEBUG] ftdm_config.c:80 Configuration file is
> /usr/local/freeswitch/conf/freetdm.conf.
> > 2011-09-19 15:44:03.149105 [DEBUG] ftdm_io.c:4633 Reading FreeTDM
> configuration file
> > 2011-09-19 15:44:03.149105 [DEBUG] ftdm_io.c:4649 found config for span
> > 2011-09-19 15:44:03.149105 [NOTICE] ftmod_zt.c:1323 Using DAHDI control
> device
> > 2011-09-19 15:44:03.149105 [INFO] ftdm_io.c:4963 Loading IO from
> /usr/local/freeswitch/mod/ftmod_zt.so [zt]
> > 2011-09-19 15:44:03.149105 [DEBUG] ftdm_config.c:80 Configuration file is
> /usr/local/freeswitch/conf/zt.conf.
> > 2011-09-19 15:44:03.149105 [INFO] ftmod_zt.c:585 Setting rxgain val to
> 0.000000
> > 2011-09-19 15:44:03.149105 [INFO] ftmod_zt.c:593 Setting txgain val to
> 0.000000
> > 2011-09-19 15:44:03.149105 [INFO] ftdm_io.c:787 Auto-loaded I/O module
> 'zt'
> > 2011-09-19 15:44:03.149105 [DEBUG] ftdm_io.c:4670 created span 1 (SPAN1)
> of type zt
> > 2011-09-19 15:44:03.149105 [DEBUG] ftdm_io.c:4688 span 1
> [fxo-channel]=[17-24]
> > 2011-09-19 15:44:03.149105 [DEBUG] ftdm_io.c:4718 setting trunk type to
> 'FXO' start(KEWL)
> > 2011-09-19 15:44:03.149105 [ERR] ftmod_zt.c:288 failure configuring
> device /dev/dahdi/channel chan 17 fd 48 (No such device or address)
> > 2011-09-19 15:44:03.149105 [ERR] ftmod_zt.c:288 failure configuring
> device /dev/dahdi/channel chan 18 fd 48 (No such device or address)
> > 2011-09-19 15:44:03.149105 [ERR] ftmod_zt.c:288 failure configuring
> device /dev/dahdi/channel chan 19 fd 48 (No such device or address)
> > 2011-09-19 15:44:03.149105 [ERR] ftmod_zt.c:288 failure configuring
> device /dev/dahdi/channel chan 20 fd 48 (No such device or address)
> > 2011-09-19 15:44:03.149105 [ERR] ftmod_zt.c:288 failure configuring
> device /dev/dahdi/channel chan 21 fd 48 (No such device or address)
> > 2011-09-19 15:44:03.149105 [ERR] ftmod_zt.c:288 failure configuring
> device /dev/dahdi/channel chan 22 fd 48 (No such device or address)
> > 2011-09-19 15:44:03.149105 [ERR] ftmod_zt.c:288 failure configuring
> device /dev/dahdi/channel chan 23 fd 48 (No such device or address)
> > 2011-09-19 15:44:03.149105 [ERR] ftmod_zt.c:288 failure configuring
> device /dev/dahdi/channel chan 24 fd 48 (No such device or address)
> > 2011-09-19 15:44:03.149105 [ERR] ftdm_io.c:4579 1:Failed to configure
> span
> > 2011-09-19 15:44:03.149105 [INFO] ftdm_io.c:4885 Configured 0 channel(s)
> > 2011-09-19 15:44:03.149105 [ERR] ftdm_io.c:5733 FreeTDM global
> configuration failed!
> > 2011-09-19 15:44:03.149105 [ERR] mod_freetdm.c:4805 Error configuring
> FreeTDM
> > 2011-09-19 15:44:03.149105 [INFO] switch_time.c:1028 Timezone reloaded
> 530 definitions
> > 2011-09-19 15:44:03.149105 [CRIT] switch_loadable_module.c:1019 Error
> Loading module /usr/local/freeswitch/mod/mod_freetdm.so
> > **Module load routine returned an error**
> > 2011-09-19 15:44:03.149105 [NOTICE] ftdm_sched.c:147 Main scheduling
> thread going out ...
> >
> >
> > Thanks in advance and sorry for the rant.
> >
> >
> > FreeSWITCH-users mailing list
> > FreeSWITCH-users at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> > http://www.freeswitch.org
>
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20110921/abb00c7c/attachment-0001.html
Join us at ClueCon 2011 Aug 9-11, 2011
More information about the FreeSWITCH-users
mailing list