[Freeswitch-users] libss7 * Sangoma

Anita Hall anita.hall at simmortel.com
Mon Jan 3 20:57:07 MSK 2011


Hi

This question pertains libss7 with Sangoma A108 card on Asterisk. It does
not concern freeswitch but I suppose Sangoma folks frequent this list more
:)

I am unable to make libss7 work with Sangoma. Here are the details.

Could you please provide me some pointers ?

Thanks,
Anita.

debian:~# uname -a
Linux debian 2.6.26-2-686 #1 SMP Thu Nov 25 01:53:57 UTC 2010 i686 GNU/Linux

debian:~# dahdi_hardware
pci:0000:05:04.0     wanpipe-     1923:0100 Sangoma Technologies Corp. A104d
QUAD T1/E1 AFT card
pci:0000:07:04.0     wanpipe-     1923:0100 Sangoma Technologies Corp. A104d
QUAD T1/E1 AFT card



debian:~# cat /etc/dahdi/system.conf
#autogenerated by /usr/sbin/wancfg_dahdi do not hand edit
#autogenrated on 2011-01-03
#Dahdi Channels Configurations
#For detailed Dahdi options, view /etc/dahdi/system.conf.bak
loadzone=us
defaultzone=us

#Sangoma A108 port 1 [slot:4 bus:5 span:1] <wanpipe1>
span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
echocanceller=mg2,1-15,17-31
mtp2=16

#Sangoma A108 port 2 [slot:4 bus:5 span:2] <wanpipe2>
span=2,1,0,ccs,hdb3,crc4
bchan=32-46,48-62
echocanceller=mg2,32-46,48-62
mtp2=47


debian:~# cat /etc/wanpipe/wanpipe1.conf
#=============================
===================
# WANPIPE1 Configuration File
#================================================
#
# Date: Wed Dec  6 20:29:03 UTC 2006
#
# Note: This file was generated automatically
#       by /usr/local/sbin/setup-sangoma program.
#
#       If you want to edit this file, it is
#       recommended that you use wancfg program
#       to do so.
#================================================
# Sangoma Technologies Inc.
#================================================

[devices]
wanpipe1 = WAN_AFT_TE1, Comment

[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment

[wanpipe1]
CARD_TYPE       = AFT
S514CPU         = A
CommPort        = PRI
AUTO_PCISLOT    = NO
PCISLOT         = 4
PCIBUS          = 5
FE_MEDIA        = E1
FE_LCODE        = HDB3
FE_FRAME        = NCRC4
FE_LINE         = 1
TE_CLOCK        = NORMAL
TE_REF_CLOCK    = 0
TE_SIG_MODE     = CCS
TE_HIGHIMPEDANCE        = NO
LBO             = 120OH
FE_TXTRISTATE   = NO
MTU             = 1500
UDPPORT         = 9000
TTL             = 255
IGNORE_FRONT_END = NO
TDMV_SPAN       = 1
TDMV_DCHAN      = 16
TDMV_HW_DTMF    = NO
TDMV_HW_FAX_DETECT = NO

[w1g1]
ACTIVE_CH       = ALL
TDMV_HWEC       = NO


debian:~# cat /etc/wanpipe/wanpipe2.conf
#================================================
# WANPIPE1 Configuration File
#================================================
#
# Date: Wed Dec  6 20:29:03 UTC 2006
#
# Note: This file was generated automatically
#       by /usr/local/sbin/setup-sangoma program.
#
#       If you want to edit this file, it is
#       recommended that you use wancfg program
#       to do so.
#================================================
# Sangoma Technologies Inc.
#================================================

[devices]
wanpipe2 = WAN_AFT_TE1, Comment

[interfaces]
w2g1 = wanpipe2, , TDM_VOICE, Comment

[wanpipe2]
CARD_TYPE       = AFT
S514CPU         = A
CommPort        = PRI
AUTO_PCISLOT    = NO
PCISLOT         = 4
PCIBUS          = 5
FE_MEDIA        = E1
FE_LCODE        = HDB3
FE_FRAME        = NCRC4
FE_LINE         = 2
TE_CLOCK        = NORMAL
TE_REF_CLOCK    = 0
TE_SIG_MODE     = CCS
TE_HIGHIMPEDANCE        = NO
LBO             = 120OH
FE_TXTRISTATE   = NO
MTU             = 1500
UDPPORT         = 9000
TTL             = 255
IGNORE_FRONT_END = NO
TDMV_SPAN       = 2
TDMV_DCHAN      = 16
TDMV_HW_DTMF    = NO
TDMV_HW_FAX_DETECT = NO

[w2g1]
ACTIVE_CH       = ALL
TDMV_HWEC       = NO

debian:~# cat /etc/asterisk/chan_dahdi.conf
;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit
;autogenrated on 2011-01-03
;Dahdi Channels Configurations
;For detailed Dahdi options, view /etc/asterisk/chan_dahdi.conf.bak

[trunkgroups]

[channels]
context=default
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no

;Sangoma A108 port 1 [slot:4 bus:5 span:1] <wanpipe1>
switchtype=euroisdn
context=tata
group=1
echocancel=yes
signaling=ss7                    ;this is ss7 signaling
ss7type=itu                     ;using the ITU variant
ss7_called_nai=dynamic           ;NAI for outgoing calls
ss7_calling_nai=dynamic          ;NAI for incoming calls
ss7_internationalprefix=00 ;international prefix value for incoming calls
ss7_nationalprefix=0            ;national prefix value for incoming calls
ss7_subscriberprefix=            ;subscriber prefix value for incoming calls
ss7_unknownprefix=              ;unknown prefix value for incoming calls
ss7_explictacm=yes               ;ACM is send as soon as call enters the
dial plan...may not accepted yet though
linkset=1                         ;arbitrary name for this set of channels
pointcode=13323                      ;the point code for this system...aka
SPC
adjpointcode=12650                  ;the point code for the system that we
are signaling to... aka APC
defaultdpc=12650                     ;the point code for the system that the
CICs will be negotiated with...aka DPC
networkindicator=international  ;NI value for MTP3
cicbeginswith=1                  ;the starting value of the CICs
channel =>1-15
cicbeginswith=17                 ;the starting value of the CICs
channel =>17-31         ;the channels that are CICs
sigchan=16                     ;the signaling channel

;Sangoma A108 port 2 [slot:4 bus:5 span:2] <wanpipe2>
switchtype=euroisdn
context=tata
group=1
echocancel=yes
cicbeginswith=32                  ;the starting value of the CICs
channel =>32-46
cicbeginswith=48                  ;the starting value of the CICs
channel =>48-62         ;the channels that are CICs
sigchan=47                       ;the signaling channel


debian:~# ifconfig w1g1
w1g1      Link encap:Point-to-Point Protocol
         UP POINTOPOINT RUNNING NOARP  MTU:8  Metric:1
         RX packets:772814 errors:0 dropped:0 overruns:0 frame:0
         TX packets:772814 errors:0 dropped:0 overruns:3 carrier:0
         collisions:0 txqueuelen:100
         RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
         Interrupt:16 Memory:f8d00000-f8d01fff

debian:~# ifconfig w1g1
w1g1      Link encap:Point-to-Point Protocol
         UP POINTOPOINT RUNNING NOARP  MTU:8  Metric:1
         RX packets:774782 errors:0 dropped:0 overruns:0 frame:0
         TX packets:774782 errors:0 dropped:0 overruns:3 carrier:0
         collisions:0 txqueuelen:100
         RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
         Interrupt:16 Memory:f8d00000-f8d01fff

debian:~# ifconfig w1g1
w1g1      Link encap:Point-to-Point Protocol
         UP POINTOPOINT RUNNING NOARP  MTU:8  Metric:1
         RX packets:775351 errors:0 dropped:0 overruns:0 frame:0
         TX packets:775351 errors:0 dropped:0 overruns:3 carrier:0
         collisions:0 txqueuelen:100
         RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
         Interrupt:16 Memory:f8d00000-f8d01fff

debian:~# ifconfig w1g1
w1g1      Link encap:Point-to-Point Protocol
         UP POINTOPOINT RUNNING NOARP  MTU:8  Metric:1
         RX packets:775919 errors:0 dropped:0 overruns:0 frame:0
         TX packets:775919 errors:0 dropped:0 overruns:3 carrier:0
         collisions:0 txqueuelen:100
         RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
         Interrupt:16 Memory:f8d00000-f8d01fff

debian:~# ifconfig w1g1
w1g1      Link encap:Point-to-Point Protocol
         UP POINTOPOINT RUNNING NOARP  MTU:8  Metric:1
         RX packets:776478 errors:0 dropped:0 overruns:0 frame:0
         TX packets:776478 errors:0 dropped:0 overruns:3 carrier:0
         collisions:0 txqueuelen:100
         RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
         Interrupt:16 Memory:f8d00000-f8d01fff

debian:~# ifconfig w1g1
w1g1      Link encap:Point-to-Point Protocol
         UP POINTOPOINT RUNNING NOARP  MTU:8  Metric:1
         RX packets:777079 errors:0 dropped:0 overruns:0 frame:0
         TX packets:777079 errors:0 dropped:0 overruns:3 carrier:0
         collisions:0 txqueuelen:100
         RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
         Interrupt:16 Memory:f8d00000-f8d01fff

debian:~# ifconfig w1g1
w1g1      Link encap:Point-to-Point Protocol
         UP POINTOPOINT RUNNING NOARP  MTU:8  Metric:1
         RX packets:778134 errors:0 dropped:0 overruns:0 frame:0
         TX packets:778134 errors:0 dropped:0 overruns:3 carrier:0
         collisions:0 txqueuelen:100
         RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
         Interrupt:16 Memory:f8d00000-f8d01fff


debian:~# ifconfig w2g1
w2g1      Link encap:Point-to-Point Protocol
         UP POINTOPOINT RUNNING NOARP  MTU:8  Metric:1
         RX packets:792251 errors:0 dropped:0 overruns:0 frame:0
         TX packets:792251 errors:0 dropped:0 overruns:1 carrier:0
         collisions:0 txqueuelen:100
         RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
         Interrupt:16 Memory:f8d00000-f8d01fff

debian:~# ifconfig w2g1
w2g1      Link encap:Point-to-Point Protocol
         UP POINTOPOINT RUNNING NOARP  MTU:8  Metric:1
         RX packets:792715 errors:0 dropped:0 overruns:0 frame:0
         TX packets:792715 errors:0 dropped:0 overruns:1 carrier:0
         collisions:0 txqueuelen:100
         RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
         Interrupt:16 Memory:f8d00000-f8d01fff

debian:~# ifconfig w2g1
w2g1      Link encap:Point-to-Point Protocol
         UP POINTOPOINT RUNNING NOARP  MTU:8  Metric:1
         RX packets:793219 errors:0 dropped:0 overruns:0 frame:0
         TX packets:793219 errors:0 dropped:0 overruns:1 carrier:0
         collisions:0 txqueuelen:100
         RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
         Interrupt:16 Memory:f8d00000-f8d01fff


wanpipemon -i w2g1 -c Ta

***** w2g1: E1 Alarms (Framer) *****

ALOS:   OFF     | LOS:  OFF
RED:    OFF     | AIS:  OFF
LOF:    OFF     | RAI:  OFF

***** w2g1: E1 Alarms (LIU) *****

Short Circuit:  OFF
Open Circuit:   OFF
Loss of Signal: OFF


***** w2g1: E1 Performance Monitoring Counters *****

Line Code Violation     : 0
Far End Block Errors    : 0
CRC4 Errors             : 0
FAS Errors              : 0


Rx Level        : > -2.5db


debian:~# wanpipemon -i w1g1 -c Ta

***** w1g1: E1 Alarms (Framer) *****

ALOS:   OFF     | LOS:  OFF
RED:    OFF     | AIS:  OFF
LOF:    OFF     | RAI:  OFF

***** w1g1: E1 Alarms (LIU) *****

Short Circuit:  OFF
Open Circuit:   OFF
Loss of Signal: OFF


***** w1g1: E1 Performance Monitoring Counters *****

Line Code Violation     : 371
Far End Block Errors    : 0
CRC4 Errors             : 0
FAS Errors              : 0


Rx Level        : > -2.5db


Jan  3 20:33:34 debian kernel: [55441.172179] wanpipe1: Shutting Down!
Jan  3 20:33:34 debian kernel: [55441.172179] wanpipe1: E1 Front End
unconfigation!
Jan  3 20:33:34 debian kernel: [55441.172179] wanpipe1: Unregister Wanpipe
device from Zaptel!
Jan  3 20:33:34 debian kernel: [55441.178246] wanpipe1: unregistering 'w1g1'
Jan  3 20:33:34 debian kernel: [55441.248278] wanpipe1: TASKQ Not Running
Jan  3 20:33:34 debian kernel: [55441.248281] wanpipe1: E1 Front End
unconfigation!
Jan  3 20:33:34 debian kernel: [55441.248314] wanpipe1: AFT communications
disabled! (Dev Cnt: 1 Cause: Device Down)
Jan  3 20:33:34 debian kernel: [55441.248335] wanpipe1: E1 Front End
unconfigation!
Jan  3 20:33:34 debian kernel: [55441.248373] wanpipe1: AFT communications
disabled! (Dev Cnt: 1 Cause: Device Down)
Jan  3 20:33:34 debian kernel: [55441.248415] wanpipe1: Global Chip Shutdown
Usage=1
Jan  3 20:33:34 debian kernel: [55441.248419] wanpipe1: Global E1 Front End
unconfigation!
Jan  3 20:33:34 debian kernel: [55441.250485] wanpipe1: Master shutting down
Jan  3 20:33:34 debian kernel: [55441.444571] wanpipe1: Starting WAN Setup
Jan  3 20:33:34 debian kernel: [55441.444575] wanpipe1: Locating:
A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=4, PciBus=5
Jan  3 20:33:34 debian kernel: [55441.444579] wanpipe1: Found:
A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=4, PciBus=5, Port=0
Jan  3 20:33:34 debian kernel: [55441.444599] wanpipe1: AFT PCI memory at
0xD3200000
Jan  3 20:33:34 debian kernel: [55441.444600] wanpipe1: IRQ 16 allocated to
the AFT PCI card
Jan  3 20:33:34 debian kernel: [55441.444608] wanpipe1: Starting AFT 2/4/8
Hardware Init.
Jan  3 20:33:34 debian kernel: [55441.444614] wanpipe1: Enabling front end
link monitor
Jan  3 20:33:34 debian kernel: [55441.444616] wanpipe1: Global Chip
Configuration: used=1
Jan  3 20:33:34 debian kernel: [55441.448455] wanpipe1: Global E1 Front End
configuration
Jan  3 20:33:34 debian kernel: [55441.448455] wanpipe1: AFT Data Mux Bit
Map: 0x01234567
Jan  3 20:33:34 debian kernel: [55441.448455] wanpipe1: Defaulting E1 Rx
Sens. Gain= 43 db
Jan  3 20:33:34 debian kernel: [55441.448455] wanpipe1: Configuring DS
DS26528 E1 FE
Jan  3 20:33:34 debian kernel: [55441.448455] wanpipe1:    Port
1,HDB3,non-CRC4,120OH
Jan  3 20:33:34 debian kernel: [55441.448455] wanpipe1:    Clk Normal:0,
Channels: FFFFFFFF
Jan  3 20:33:34 debian kernel: [55441.448455] wanpipe1:    Sig Mode CCS
Jan  3 20:33:34 debian kernel: [55441.456490] wanpipe1:    Rx Sensitivity
Gain 43dB (default).
Jan  3 20:33:34 debian kernel: [55441.457242] wanpipe1: Front end successful
Jan  3 20:33:34 debian kernel: [55441.457469] wanpipe1: Front End Interface
Ready 0x40000000
Jan  3 20:33:34 debian kernel: [55441.457473] wanpipe1: WARNING: No Echo
Canceller channels are available!
Jan  3 20:33:34 debian kernel: [55441.457494] wanpipe1: Configuring Device
:wanpipe1  FrmVr=39
Jan  3 20:33:34 debian kernel: [55441.457495] wanpipe1:    Global MTU
    = 1500
Jan  3 20:33:34 debian kernel: [55441.457496] wanpipe1:    Global MRU
    = 1500
Jan  3 20:33:34 debian kernel: [55441.457497] wanpipe1:    Data Mux Map
    = 0x01234567
Jan  3 20:33:34 debian kernel: [55441.457498] wanpipe1:    Rx CRC Bytes
    = 0
Jan  3 20:33:34 debian kernel: [55441.457499] wanpipe1:    Global TDM Int
    = Enabled
Jan  3 20:33:34 debian kernel: [55441.457500] wanpipe1:    Global TDM Ring
   = Enabled
Jan  3 20:33:34 debian kernel: [55441.457501] wanpipe1:    TDMV HW DTMF/FAX
    = Disabled/Disabled(0)
Jan  3 20:33:34 debian kernel: [55441.457502] wanpipe1:    TDMV Span
   = 1 : Enabled
Jan  3 20:33:34 debian kernel: [55441.457503] wanpipe1:    TDMV Dummy
= Disabled
Jan  3 20:33:34 debian kernel: [55441.457505] wanpipe1:    RTP TAP
   = Disabled
Jan  3 20:33:34 debian kernel: [55441.457540] wanpipe1: Configuring
Interface: w1g1
Jan  3 20:33:34 debian kernel: [55441.457543] wanpipe1:w1g1: Running in TDM
Voice Zaptel Mode.
Jan  3 20:33:34 debian kernel: [55441.457547] wanpipe1:    Fifo Level
Map:0x01041040
Jan  3 20:33:34 debian kernel: [55441.457549] wanpipe1:    MRU           :8
Jan  3 20:33:34 debian kernel: [55441.457550] wanpipe1:    MTU           :8
Jan  3 20:33:34 debian kernel: [55441.457551] wanpipe1:    HDLC Eng
 :Off (Transparent) | N/A
Jan  3 20:33:34 debian kernel: [55441.457553] wanpipe1:    Data Mux Ctrl :On
Jan  3 20:33:34 debian kernel: [55441.457554] wanpipe1:    Active Ch Map
:0x00000002
Jan  3 20:33:34 debian kernel: [55441.457555] wanpipe1:    First TSlot   :1
Jan  3 20:33:34 debian kernel: [55441.457568] wanpipe1:    DMA/Len/Chain/EC
:4/1024/Off/Off
Jan  3 20:33:34 debian kernel: [55441.457575] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.457581] wanpipe1:    Active Ch Map
:0x00000004
Jan  3 20:33:34 debian kernel: [55441.457582] wanpipe1:    First TSlot   :2
Jan  3 20:33:34 debian kernel: [55441.457597] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.457602] wanpipe1:    Active Ch Map
:0x00000008
Jan  3 20:33:34 debian kernel: [55441.457603] wanpipe1:    First TSlot   :3
Jan  3 20:33:34 debian kernel: [55441.457618] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.457623] wanpipe1:    Active Ch Map
:0x00000010
Jan  3 20:33:34 debian kernel: [55441.457624] wanpipe1:    First TSlot   :4
Jan  3 20:33:34 debian kernel: [55441.457637] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.457643] wanpipe1:    Active Ch Map
:0x00000020
Jan  3 20:33:34 debian kernel: [55441.457644] wanpipe1:    First TSlot   :5
Jan  3 20:33:34 debian kernel: [55441.457657] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.457663] wanpipe1:    Active Ch Map
:0x00000040
Jan  3 20:33:34 debian kernel: [55441.457664] wanpipe1:    First TSlot   :6
Jan  3 20:33:34 debian kernel: [55441.457678] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.457684] wanpipe1:    Active Ch Map
:0x00000080
Jan  3 20:33:34 debian kernel: [55441.457685] wanpipe1:    First TSlot   :7
Jan  3 20:33:34 debian kernel: [55441.457698] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.457705] wanpipe1:    Active Ch Map
:0x00000100
Jan  3 20:33:34 debian kernel: [55441.457706] wanpipe1:    First TSlot   :8
Jan  3 20:33:34 debian kernel: [55441.457719] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.457725] wanpipe1:    Active Ch Map
:0x00000200
Jan  3 20:33:34 debian kernel: [55441.457726] wanpipe1:    First TSlot   :9
Jan  3 20:33:34 debian kernel: [55441.457740] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.457746] wanpipe1:    Active Ch Map
:0x00000400
Jan  3 20:33:34 debian kernel: [55441.457747] wanpipe1:    First TSlot   :10
Jan  3 20:33:34 debian kernel: [55441.457760] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.457765] wanpipe1:    Active Ch Map
:0x00000800
Jan  3 20:33:34 debian kernel: [55441.457766] wanpipe1:    First TSlot   :11
Jan  3 20:33:34 debian kernel: [55441.457781] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.457786] wanpipe1:    Active Ch Map
:0x00001000
Jan  3 20:33:34 debian kernel: [55441.457787] wanpipe1:    First TSlot   :12
Jan  3 20:33:34 debian kernel: [55441.457801] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.457807] wanpipe1:    Active Ch Map
:0x00002000
Jan  3 20:33:34 debian kernel: [55441.457808] wanpipe1:    First TSlot   :13
Jan  3 20:33:34 debian kernel: [55441.457822] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.457828] wanpipe1:    Active Ch Map
:0x00004000
Jan  3 20:33:34 debian kernel: [55441.457829] wanpipe1:    First TSlot   :14
Jan  3 20:33:34 debian kernel: [55441.457842] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.457848] wanpipe1:    Active Ch Map
:0x00008000
Jan  3 20:33:34 debian kernel: [55441.457849] wanpipe1:    First TSlot   :15
Jan  3 20:33:34 debian kernel: [55441.457862] wanpipe1: Configuring
Interface: w1g1
Jan  3 20:33:34 debian kernel: [55441.457864] wanpipe1:w1g1: Running in TDM
DCHAN Voice Zaptel Mode.
Jan  3 20:33:34 debian kernel: [55441.457866] wanpipe1:    MRU
:1500
Jan  3 20:33:34 debian kernel: [55441.457867] wanpipe1:    MTU
:1500
Jan  3 20:33:34 debian kernel: [55441.457868] wanpipe1:    HDLC Eng      :On
| N/A
Jan  3 20:33:34 debian kernel: [55441.457869] wanpipe1:    Data Mux Ctrl
:Off
Jan  3 20:33:34 debian kernel: [55441.457870] wanpipe1:    Active Ch Map
:0x00010000
Jan  3 20:33:34 debian kernel: [55441.457871] wanpipe1:    First TSlot   :16
Jan  3 20:33:34 debian kernel: [55441.457881] wanpipe1:    DMA/Len/Chain/EC
:65/4096/On/Off
Jan  3 20:33:34 debian kernel: [55441.457905] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.457910] wanpipe1:    Active Ch Map
:0x00020000
Jan  3 20:33:34 debian kernel: [55441.457911] wanpipe1:    First TSlot   :17
Jan  3 20:33:34 debian kernel: [55441.457925] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.457931] wanpipe1:    Active Ch Map
:0x00040000
Jan  3 20:33:34 debian kernel: [55441.457932] wanpipe1:    First TSlot   :18
Jan  3 20:33:34 debian kernel: [55441.457945] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.457951] wanpipe1:    Active Ch Map
:0x00080000
Jan  3 20:33:34 debian kernel: [55441.457952] wanpipe1:    First TSlot   :19
Jan  3 20:33:34 debian kernel: [55441.457967] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.457973] wanpipe1:    Active Ch Map
:0x00100000
Jan  3 20:33:34 debian kernel: [55441.457974] wanpipe1:    First TSlot   :20
Jan  3 20:33:34 debian kernel: [55441.457987] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.457993] wanpipe1:    Active Ch Map
:0x00200000
Jan  3 20:33:34 debian kernel: [55441.457994] wanpipe1:    First TSlot   :21
Jan  3 20:33:34 debian kernel: [55441.458009] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.458015] wanpipe1:    Active Ch Map
:0x00400000
Jan  3 20:33:34 debian kernel: [55441.458016] wanpipe1:    First TSlot   :22
Jan  3 20:33:34 debian kernel: [55441.458030] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.458036] wanpipe1:    Active Ch Map
:0x00800000
Jan  3 20:33:34 debian kernel: [55441.458037] wanpipe1:    First TSlot   :23
Jan  3 20:33:34 debian kernel: [55441.458051] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.458057] wanpipe1:    Active Ch Map
:0x01000000
Jan  3 20:33:34 debian kernel: [55441.458058] wanpipe1:    First TSlot   :24
Jan  3 20:33:34 debian kernel: [55441.458072] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.458078] wanpipe1:    Active Ch Map
:0x02000000
Jan  3 20:33:34 debian kernel: [55441.458079] wanpipe1:    First TSlot   :25
Jan  3 20:33:34 debian kernel: [55441.458094] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.458100] wanpipe1:    Active Ch Map
:0x04000000
Jan  3 20:33:34 debian kernel: [55441.458101] wanpipe1:    First TSlot   :26
Jan  3 20:33:34 debian kernel: [55441.458116] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.458122] wanpipe1:    Active Ch Map
:0x08000000
Jan  3 20:33:34 debian kernel: [55441.458123] wanpipe1:    First TSlot   :27
Jan  3 20:33:34 debian kernel: [55441.458137] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.458143] wanpipe1:    Active Ch Map
:0x10000000
Jan  3 20:33:34 debian kernel: [55441.458144] wanpipe1:    First TSlot   :28
Jan  3 20:33:34 debian kernel: [55441.458160] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.458166] wanpipe1:    Active Ch Map
:0x20000000
Jan  3 20:33:34 debian kernel: [55441.458167] wanpipe1:    First TSlot   :29
Jan  3 20:33:34 debian kernel: [55441.458181] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.458187] wanpipe1:    Active Ch Map
:0x40000000
Jan  3 20:33:34 debian kernel: [55441.458188] wanpipe1:    First TSlot   :30
Jan  3 20:33:34 debian kernel: [55441.458202] wanpipe1: Configuring
Interface: w1g1 (log supress)
Jan  3 20:33:34 debian kernel: [55441.458205] wanpipe1: Configuring TDMV
Master dev w1g1
Jan  3 20:33:34 debian kernel: [55441.458209] wanpipe1:    Active Ch Map
:0x80000000
Jan  3 20:33:34 debian kernel: [55441.458210] wanpipe1:    First TSlot   :31
Jan  3 20:33:34 debian kernel: [55441.458226] wanpipe1: Enable Zaptel HW
DCHAN interface
Jan  3 20:33:34 debian kernel: [55441.458462] wanpipe1: Wanpipe device is
registered to Zaptel span # 1!
Jan  3 20:33:34 debian kernel: [55441.458760] wanpipe1: TDM Free Run Timing
Enabled 1 ms
Jan  3 20:33:34 debian kernel: [55441.464708] wanpipe1: Wanpipe Front End
Interrupt Restart Timeout
Jan  3 20:33:40 debian kernel: [55450.402880] wanpipe1: E1 connected!
Jan  3 20:33:40 debian kernel: [55450.407421] wanpipe1: AFT communications
enabled!
Jan  3 20:33:40 debian kernel: [55450.407421] wanpipe1: AFT Global TDM Intr
Jan  3 20:33:40 debian kernel: [55450.409902] wanpipe1: Global TDM Ring
Resync
Jan  3 20:33:41 debian kernel: [55452.785733] wanpipe1: Enable E1 CCS
Signalling mode!


debian*CLI> core show version
Asterisk 1.6.2.0 built by root @ debian on a i686 running Linux on
2011-01-03 08:57:50 UTC


debian*CLI> ss7 show linkset 1
SS7 linkset 1 status: Down


debian*CLI> ss7 set debug off linkset 1
Enabled debugging on linkset 1
Len = 4 [ ff ff 01 03 ]
FSN: 127 FIB 1
BSN: 127 BIB 1
<[0] LSSU SIOS

Link state change: NOTALIGNED -> NOTALIGNED
Len = 4 [ ff ff 01 00 ]
FSN: 127 FIB 1
BSN: 127 BIB 1
<[0] LSSU SIO

Link state change: NOTALIGNED -> ALIGNED
Len = 4 [ ff ff 01 02 ]
FSN: 127 FIB 1
BSN: 127 BIB 1
>[0] LSSU SIE

Link state change: ALIGNED -> IDLE
Link state change: IDLE -> NOTALIGNED
Len = 4 [ ff ff 01 00 ]
FSN: 127 FIB 1
BSN: 127 BIB 1
>[0] LSSU SIO
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20110103/6104a9a1/attachment-0001.html 


More information about the FreeSWITCH-users mailing list