[Freeswitch-users] libss7 * Sangoma
Wasim Baig
wasim at convergence.pk
Tue Jan 4 04:12:34 MSK 2011
anita:
asterisk-ss7 is the correct list for this
change
TDMV_DCHAN = 16
to
TDMV_DCHAN = 0
in wanpipeX.conf
fwiw, chan_ss7 is nicer ...
-wasim
On Mon, Jan 3, 2011 at 22:57, Anita Hall <anita.hall at simmortel.com> wrote:
> Hi
>
> This question pertains libss7 with Sangoma A108 card on Asterisk. It does
> not concern freeswitch but I suppose Sangoma folks frequent this list more
> :)
>
> I am unable to make libss7 work with Sangoma. Here are the details.
>
> Could you please provide me some pointers ?
>
> Thanks,
> Anita.
>
> debian:~# uname -a
> Linux debian 2.6.26-2-686 #1 SMP Thu Nov 25 01:53:57 UTC 2010 i686
> GNU/Linux
>
> debian:~# dahdi_hardware
> pci:0000:05:04.0 wanpipe- 1923:0100 Sangoma Technologies Corp.
> A104d QUAD T1/E1 AFT card
> pci:0000:07:04.0 wanpipe- 1923:0100 Sangoma Technologies Corp.
> A104d QUAD T1/E1 AFT card
>
>
>
> debian:~# cat /etc/dahdi/system.conf
> #autogenerated by /usr/sbin/wancfg_dahdi do not hand edit
> #autogenrated on 2011-01-03
> #Dahdi Channels Configurations
> #For detailed Dahdi options, view /etc/dahdi/system.conf.bak
> loadzone=us
> defaultzone=us
>
> #Sangoma A108 port 1 [slot:4 bus:5 span:1] <wanpipe1>
> span=1,1,0,ccs,hdb3,crc4
> bchan=1-15,17-31
> echocanceller=mg2,1-15,17-31
> mtp2=16
>
> #Sangoma A108 port 2 [slot:4 bus:5 span:2] <wanpipe2>
> span=2,1,0,ccs,hdb3,crc4
> bchan=32-46,48-62
> echocanceller=mg2,32-46,48-62
> mtp2=47
>
>
> debian:~# cat /etc/wanpipe/wanpipe1.conf
> #=============================
> ===================
> # WANPIPE1 Configuration File
> #================================================
> #
> # Date: Wed Dec 6 20:29:03 UTC 2006
> #
> # Note: This file was generated automatically
> # by /usr/local/sbin/setup-sangoma program.
> #
> # If you want to edit this file, it is
> # recommended that you use wancfg program
> # to do so.
> #================================================
> # Sangoma Technologies Inc.
> #================================================
>
> [devices]
> wanpipe1 = WAN_AFT_TE1, Comment
>
> [interfaces]
> w1g1 = wanpipe1, , TDM_VOICE, Comment
>
> [wanpipe1]
> CARD_TYPE = AFT
> S514CPU = A
> CommPort = PRI
> AUTO_PCISLOT = NO
> PCISLOT = 4
> PCIBUS = 5
> FE_MEDIA = E1
> FE_LCODE = HDB3
> FE_FRAME = NCRC4
> FE_LINE = 1
> TE_CLOCK = NORMAL
> TE_REF_CLOCK = 0
> TE_SIG_MODE = CCS
> TE_HIGHIMPEDANCE = NO
> LBO = 120OH
> FE_TXTRISTATE = NO
> MTU = 1500
> UDPPORT = 9000
> TTL = 255
> IGNORE_FRONT_END = NO
> TDMV_SPAN = 1
> TDMV_DCHAN = 16
> TDMV_HW_DTMF = NO
> TDMV_HW_FAX_DETECT = NO
>
> [w1g1]
> ACTIVE_CH = ALL
> TDMV_HWEC = NO
>
>
> debian:~# cat /etc/wanpipe/wanpipe2.conf
> #================================================
> # WANPIPE1 Configuration File
> #================================================
> #
> # Date: Wed Dec 6 20:29:03 UTC 2006
> #
> # Note: This file was generated automatically
> # by /usr/local/sbin/setup-sangoma program.
> #
> # If you want to edit this file, it is
> # recommended that you use wancfg program
> # to do so.
> #================================================
> # Sangoma Technologies Inc.
> #================================================
>
> [devices]
> wanpipe2 = WAN_AFT_TE1, Comment
>
> [interfaces]
> w2g1 = wanpipe2, , TDM_VOICE, Comment
>
> [wanpipe2]
> CARD_TYPE = AFT
> S514CPU = A
> CommPort = PRI
> AUTO_PCISLOT = NO
> PCISLOT = 4
> PCIBUS = 5
> FE_MEDIA = E1
> FE_LCODE = HDB3
> FE_FRAME = NCRC4
> FE_LINE = 2
> TE_CLOCK = NORMAL
> TE_REF_CLOCK = 0
> TE_SIG_MODE = CCS
> TE_HIGHIMPEDANCE = NO
> LBO = 120OH
> FE_TXTRISTATE = NO
> MTU = 1500
> UDPPORT = 9000
> TTL = 255
> IGNORE_FRONT_END = NO
> TDMV_SPAN = 2
> TDMV_DCHAN = 16
> TDMV_HW_DTMF = NO
> TDMV_HW_FAX_DETECT = NO
>
> [w2g1]
> ACTIVE_CH = ALL
> TDMV_HWEC = NO
>
> debian:~# cat /etc/asterisk/chan_dahdi.conf
> ;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit
> ;autogenrated on 2011-01-03
> ;Dahdi Channels Configurations
> ;For detailed Dahdi options, view /etc/asterisk/chan_dahdi.conf.bak
>
> [trunkgroups]
>
> [channels]
> context=default
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> relaxdtmf=yes
> rxgain=0.0
> txgain=0.0
> group=1
> callgroup=1
> pickupgroup=1
> immediate=no
>
> ;Sangoma A108 port 1 [slot:4 bus:5 span:1] <wanpipe1>
> switchtype=euroisdn
> context=tata
> group=1
> echocancel=yes
> signaling=ss7 ;this is ss7 signaling
> ss7type=itu ;using the ITU variant
> ss7_called_nai=dynamic ;NAI for outgoing calls
> ss7_calling_nai=dynamic ;NAI for incoming calls
> ss7_internationalprefix=00 ;international prefix value for incoming calls
> ss7_nationalprefix=0 ;national prefix value for incoming calls
> ss7_subscriberprefix= ;subscriber prefix value for incoming
> calls
> ss7_unknownprefix= ;unknown prefix value for incoming calls
> ss7_explictacm=yes ;ACM is send as soon as call enters the
> dial plan...may not accepted yet though
> linkset=1 ;arbitrary name for this set of channels
> pointcode=13323 ;the point code for this system...aka
> SPC
> adjpointcode=12650 ;the point code for the system that we
> are signaling to... aka APC
> defaultdpc=12650 ;the point code for the system that
> the CICs will be negotiated with...aka DPC
> networkindicator=international ;NI value for MTP3
> cicbeginswith=1 ;the starting value of the CICs
> channel =>1-15
> cicbeginswith=17 ;the starting value of the CICs
> channel =>17-31 ;the channels that are CICs
> sigchan=16 ;the signaling channel
>
> ;Sangoma A108 port 2 [slot:4 bus:5 span:2] <wanpipe2>
> switchtype=euroisdn
> context=tata
> group=1
> echocancel=yes
> cicbeginswith=32 ;the starting value of the CICs
> channel =>32-46
> cicbeginswith=48 ;the starting value of the CICs
> channel =>48-62 ;the channels that are CICs
> sigchan=47 ;the signaling channel
>
>
> debian:~# ifconfig w1g1
> w1g1 Link encap:Point-to-Point Protocol
> UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1
> RX packets:772814 errors:0 dropped:0 overruns:0 frame:0
> TX packets:772814 errors:0 dropped:0 overruns:3 carrier:0
> collisions:0 txqueuelen:100
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
> Interrupt:16 Memory:f8d00000-f8d01fff
>
> debian:~# ifconfig w1g1
> w1g1 Link encap:Point-to-Point Protocol
> UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1
> RX packets:774782 errors:0 dropped:0 overruns:0 frame:0
> TX packets:774782 errors:0 dropped:0 overruns:3 carrier:0
> collisions:0 txqueuelen:100
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
> Interrupt:16 Memory:f8d00000-f8d01fff
>
> debian:~# ifconfig w1g1
> w1g1 Link encap:Point-to-Point Protocol
> UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1
> RX packets:775351 errors:0 dropped:0 overruns:0 frame:0
> TX packets:775351 errors:0 dropped:0 overruns:3 carrier:0
> collisions:0 txqueuelen:100
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
> Interrupt:16 Memory:f8d00000-f8d01fff
>
> debian:~# ifconfig w1g1
> w1g1 Link encap:Point-to-Point Protocol
> UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1
> RX packets:775919 errors:0 dropped:0 overruns:0 frame:0
> TX packets:775919 errors:0 dropped:0 overruns:3 carrier:0
> collisions:0 txqueuelen:100
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
> Interrupt:16 Memory:f8d00000-f8d01fff
>
> debian:~# ifconfig w1g1
> w1g1 Link encap:Point-to-Point Protocol
> UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1
> RX packets:776478 errors:0 dropped:0 overruns:0 frame:0
> TX packets:776478 errors:0 dropped:0 overruns:3 carrier:0
> collisions:0 txqueuelen:100
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
> Interrupt:16 Memory:f8d00000-f8d01fff
>
> debian:~# ifconfig w1g1
> w1g1 Link encap:Point-to-Point Protocol
> UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1
> RX packets:777079 errors:0 dropped:0 overruns:0 frame:0
> TX packets:777079 errors:0 dropped:0 overruns:3 carrier:0
> collisions:0 txqueuelen:100
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
> Interrupt:16 Memory:f8d00000-f8d01fff
>
> debian:~# ifconfig w1g1
> w1g1 Link encap:Point-to-Point Protocol
> UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1
> RX packets:778134 errors:0 dropped:0 overruns:0 frame:0
> TX packets:778134 errors:0 dropped:0 overruns:3 carrier:0
> collisions:0 txqueuelen:100
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
> Interrupt:16 Memory:f8d00000-f8d01fff
>
>
> debian:~# ifconfig w2g1
> w2g1 Link encap:Point-to-Point Protocol
> UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1
> RX packets:792251 errors:0 dropped:0 overruns:0 frame:0
> TX packets:792251 errors:0 dropped:0 overruns:1 carrier:0
> collisions:0 txqueuelen:100
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
> Interrupt:16 Memory:f8d00000-f8d01fff
>
> debian:~# ifconfig w2g1
> w2g1 Link encap:Point-to-Point Protocol
> UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1
> RX packets:792715 errors:0 dropped:0 overruns:0 frame:0
> TX packets:792715 errors:0 dropped:0 overruns:1 carrier:0
> collisions:0 txqueuelen:100
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
> Interrupt:16 Memory:f8d00000-f8d01fff
>
> debian:~# ifconfig w2g1
> w2g1 Link encap:Point-to-Point Protocol
> UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1
> RX packets:793219 errors:0 dropped:0 overruns:0 frame:0
> TX packets:793219 errors:0 dropped:0 overruns:1 carrier:0
> collisions:0 txqueuelen:100
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
> Interrupt:16 Memory:f8d00000-f8d01fff
>
>
> wanpipemon -i w2g1 -c Ta
>
> ***** w2g1: E1 Alarms (Framer) *****
>
> ALOS: OFF | LOS: OFF
> RED: OFF | AIS: OFF
> LOF: OFF | RAI: OFF
>
> ***** w2g1: E1 Alarms (LIU) *****
>
> Short Circuit: OFF
> Open Circuit: OFF
> Loss of Signal: OFF
>
>
> ***** w2g1: E1 Performance Monitoring Counters *****
>
> Line Code Violation : 0
> Far End Block Errors : 0
> CRC4 Errors : 0
> FAS Errors : 0
>
>
> Rx Level : > -2.5db
>
>
> debian:~# wanpipemon -i w1g1 -c Ta
>
> ***** w1g1: E1 Alarms (Framer) *****
>
> ALOS: OFF | LOS: OFF
> RED: OFF | AIS: OFF
> LOF: OFF | RAI: OFF
>
> ***** w1g1: E1 Alarms (LIU) *****
>
> Short Circuit: OFF
> Open Circuit: OFF
> Loss of Signal: OFF
>
>
> ***** w1g1: E1 Performance Monitoring Counters *****
>
> Line Code Violation : 371
> Far End Block Errors : 0
> CRC4 Errors : 0
> FAS Errors : 0
>
>
> Rx Level : > -2.5db
>
>
> Jan 3 20:33:34 debian kernel: [55441.172179] wanpipe1: Shutting Down!
> Jan 3 20:33:34 debian kernel: [55441.172179] wanpipe1: E1 Front End
> unconfigation!
> Jan 3 20:33:34 debian kernel: [55441.172179] wanpipe1: Unregister Wanpipe
> device from Zaptel!
> Jan 3 20:33:34 debian kernel: [55441.178246] wanpipe1: unregistering
> 'w1g1'
> Jan 3 20:33:34 debian kernel: [55441.248278] wanpipe1: TASKQ Not Running
> Jan 3 20:33:34 debian kernel: [55441.248281] wanpipe1: E1 Front End
> unconfigation!
> Jan 3 20:33:34 debian kernel: [55441.248314] wanpipe1: AFT communications
> disabled! (Dev Cnt: 1 Cause: Device Down)
> Jan 3 20:33:34 debian kernel: [55441.248335] wanpipe1: E1 Front End
> unconfigation!
> Jan 3 20:33:34 debian kernel: [55441.248373] wanpipe1: AFT communications
> disabled! (Dev Cnt: 1 Cause: Device Down)
> Jan 3 20:33:34 debian kernel: [55441.248415] wanpipe1: Global Chip
> Shutdown Usage=1
> Jan 3 20:33:34 debian kernel: [55441.248419] wanpipe1: Global E1 Front End
> unconfigation!
> Jan 3 20:33:34 debian kernel: [55441.250485] wanpipe1: Master shutting
> down
> Jan 3 20:33:34 debian kernel: [55441.444571] wanpipe1: Starting WAN Setup
> Jan 3 20:33:34 debian kernel: [55441.444575] wanpipe1: Locating:
> A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=4, PciBus=5
> Jan 3 20:33:34 debian kernel: [55441.444579] wanpipe1: Found:
> A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=4, PciBus=5, Port=0
> Jan 3 20:33:34 debian kernel: [55441.444599] wanpipe1: AFT PCI memory at
> 0xD3200000
> Jan 3 20:33:34 debian kernel: [55441.444600] wanpipe1: IRQ 16 allocated to
> the AFT PCI card
> Jan 3 20:33:34 debian kernel: [55441.444608] wanpipe1: Starting AFT 2/4/8
> Hardware Init.
> Jan 3 20:33:34 debian kernel: [55441.444614] wanpipe1: Enabling front end
> link monitor
> Jan 3 20:33:34 debian kernel: [55441.444616] wanpipe1: Global Chip
> Configuration: used=1
> Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: Global E1 Front End
> configuration
> Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: AFT Data Mux Bit
> Map: 0x01234567
> Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: Defaulting E1 Rx
> Sens. Gain= 43 db
> Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: Configuring DS
> DS26528 E1 FE
> Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: Port
> 1,HDB3,non-CRC4,120OH
> Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: Clk Normal:0,
> Channels: FFFFFFFF
> Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: Sig Mode CCS
> Jan 3 20:33:34 debian kernel: [55441.456490] wanpipe1: Rx Sensitivity
> Gain 43dB (default).
> Jan 3 20:33:34 debian kernel: [55441.457242] wanpipe1: Front end
> successful
> Jan 3 20:33:34 debian kernel: [55441.457469] wanpipe1: Front End Interface
> Ready 0x40000000
> Jan 3 20:33:34 debian kernel: [55441.457473] wanpipe1: WARNING: No Echo
> Canceller channels are available!
> Jan 3 20:33:34 debian kernel: [55441.457494] wanpipe1: Configuring Device
> :wanpipe1 FrmVr=39
> Jan 3 20:33:34 debian kernel: [55441.457495] wanpipe1: Global MTU
> = 1500
> Jan 3 20:33:34 debian kernel: [55441.457496] wanpipe1: Global MRU
> = 1500
> Jan 3 20:33:34 debian kernel: [55441.457497] wanpipe1: Data Mux Map
> = 0x01234567
> Jan 3 20:33:34 debian kernel: [55441.457498] wanpipe1: Rx CRC Bytes
> = 0
> Jan 3 20:33:34 debian kernel: [55441.457499] wanpipe1: Global TDM Int
> = Enabled
> Jan 3 20:33:34 debian kernel: [55441.457500] wanpipe1: Global TDM Ring
> = Enabled
> Jan 3 20:33:34 debian kernel: [55441.457501] wanpipe1: TDMV HW DTMF/FAX
> = Disabled/Disabled(0)
> Jan 3 20:33:34 debian kernel: [55441.457502] wanpipe1: TDMV Span
> = 1 : Enabled
> Jan 3 20:33:34 debian kernel: [55441.457503] wanpipe1: TDMV Dummy
> = Disabled
> Jan 3 20:33:34 debian kernel: [55441.457505] wanpipe1: RTP TAP
> = Disabled
> Jan 3 20:33:34 debian kernel: [55441.457540] wanpipe1: Configuring
> Interface: w1g1
> Jan 3 20:33:34 debian kernel: [55441.457543] wanpipe1:w1g1: Running in TDM
> Voice Zaptel Mode.
> Jan 3 20:33:34 debian kernel: [55441.457547] wanpipe1: Fifo Level
> Map:0x01041040
> Jan 3 20:33:34 debian kernel: [55441.457549] wanpipe1: MRU :8
> Jan 3 20:33:34 debian kernel: [55441.457550] wanpipe1: MTU :8
> Jan 3 20:33:34 debian kernel: [55441.457551] wanpipe1: HDLC Eng
> :Off (Transparent) | N/A
> Jan 3 20:33:34 debian kernel: [55441.457553] wanpipe1: Data Mux Ctrl
> :On
> Jan 3 20:33:34 debian kernel: [55441.457554] wanpipe1: Active Ch Map
> :0x00000002
> Jan 3 20:33:34 debian kernel: [55441.457555] wanpipe1: First TSlot :1
> Jan 3 20:33:34 debian kernel: [55441.457568] wanpipe1: DMA/Len/Chain/EC
> :4/1024/Off/Off
> Jan 3 20:33:34 debian kernel: [55441.457575] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.457581] wanpipe1: Active Ch Map
> :0x00000004
> Jan 3 20:33:34 debian kernel: [55441.457582] wanpipe1: First TSlot :2
> Jan 3 20:33:34 debian kernel: [55441.457597] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.457602] wanpipe1: Active Ch Map
> :0x00000008
> Jan 3 20:33:34 debian kernel: [55441.457603] wanpipe1: First TSlot :3
> Jan 3 20:33:34 debian kernel: [55441.457618] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.457623] wanpipe1: Active Ch Map
> :0x00000010
> Jan 3 20:33:34 debian kernel: [55441.457624] wanpipe1: First TSlot :4
> Jan 3 20:33:34 debian kernel: [55441.457637] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.457643] wanpipe1: Active Ch Map
> :0x00000020
> Jan 3 20:33:34 debian kernel: [55441.457644] wanpipe1: First TSlot :5
> Jan 3 20:33:34 debian kernel: [55441.457657] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.457663] wanpipe1: Active Ch Map
> :0x00000040
> Jan 3 20:33:34 debian kernel: [55441.457664] wanpipe1: First TSlot :6
> Jan 3 20:33:34 debian kernel: [55441.457678] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.457684] wanpipe1: Active Ch Map
> :0x00000080
> Jan 3 20:33:34 debian kernel: [55441.457685] wanpipe1: First TSlot :7
> Jan 3 20:33:34 debian kernel: [55441.457698] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.457705] wanpipe1: Active Ch Map
> :0x00000100
> Jan 3 20:33:34 debian kernel: [55441.457706] wanpipe1: First TSlot :8
> Jan 3 20:33:34 debian kernel: [55441.457719] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.457725] wanpipe1: Active Ch Map
> :0x00000200
> Jan 3 20:33:34 debian kernel: [55441.457726] wanpipe1: First TSlot :9
> Jan 3 20:33:34 debian kernel: [55441.457740] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.457746] wanpipe1: Active Ch Map
> :0x00000400
> Jan 3 20:33:34 debian kernel: [55441.457747] wanpipe1: First TSlot
> :10
> Jan 3 20:33:34 debian kernel: [55441.457760] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.457765] wanpipe1: Active Ch Map
> :0x00000800
> Jan 3 20:33:34 debian kernel: [55441.457766] wanpipe1: First TSlot
> :11
> Jan 3 20:33:34 debian kernel: [55441.457781] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.457786] wanpipe1: Active Ch Map
> :0x00001000
> Jan 3 20:33:34 debian kernel: [55441.457787] wanpipe1: First TSlot
> :12
> Jan 3 20:33:34 debian kernel: [55441.457801] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.457807] wanpipe1: Active Ch Map
> :0x00002000
> Jan 3 20:33:34 debian kernel: [55441.457808] wanpipe1: First TSlot
> :13
> Jan 3 20:33:34 debian kernel: [55441.457822] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.457828] wanpipe1: Active Ch Map
> :0x00004000
> Jan 3 20:33:34 debian kernel: [55441.457829] wanpipe1: First TSlot
> :14
> Jan 3 20:33:34 debian kernel: [55441.457842] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.457848] wanpipe1: Active Ch Map
> :0x00008000
> Jan 3 20:33:34 debian kernel: [55441.457849] wanpipe1: First TSlot
> :15
> Jan 3 20:33:34 debian kernel: [55441.457862] wanpipe1: Configuring
> Interface: w1g1
> Jan 3 20:33:34 debian kernel: [55441.457864] wanpipe1:w1g1: Running in TDM
> DCHAN Voice Zaptel Mode.
> Jan 3 20:33:34 debian kernel: [55441.457866] wanpipe1: MRU
> :1500
> Jan 3 20:33:34 debian kernel: [55441.457867] wanpipe1: MTU
> :1500
> Jan 3 20:33:34 debian kernel: [55441.457868] wanpipe1: HDLC Eng
> :On | N/A
> Jan 3 20:33:34 debian kernel: [55441.457869] wanpipe1: Data Mux Ctrl
> :Off
> Jan 3 20:33:34 debian kernel: [55441.457870] wanpipe1: Active Ch Map
> :0x00010000
> Jan 3 20:33:34 debian kernel: [55441.457871] wanpipe1: First TSlot
> :16
> Jan 3 20:33:34 debian kernel: [55441.457881] wanpipe1: DMA/Len/Chain/EC
> :65/4096/On/Off
> Jan 3 20:33:34 debian kernel: [55441.457905] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.457910] wanpipe1: Active Ch Map
> :0x00020000
> Jan 3 20:33:34 debian kernel: [55441.457911] wanpipe1: First TSlot
> :17
> Jan 3 20:33:34 debian kernel: [55441.457925] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.457931] wanpipe1: Active Ch Map
> :0x00040000
> Jan 3 20:33:34 debian kernel: [55441.457932] wanpipe1: First TSlot
> :18
> Jan 3 20:33:34 debian kernel: [55441.457945] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.457951] wanpipe1: Active Ch Map
> :0x00080000
> Jan 3 20:33:34 debian kernel: [55441.457952] wanpipe1: First TSlot
> :19
> Jan 3 20:33:34 debian kernel: [55441.457967] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.457973] wanpipe1: Active Ch Map
> :0x00100000
> Jan 3 20:33:34 debian kernel: [55441.457974] wanpipe1: First TSlot
> :20
> Jan 3 20:33:34 debian kernel: [55441.457987] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.457993] wanpipe1: Active Ch Map
> :0x00200000
> Jan 3 20:33:34 debian kernel: [55441.457994] wanpipe1: First TSlot
> :21
> Jan 3 20:33:34 debian kernel: [55441.458009] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.458015] wanpipe1: Active Ch Map
> :0x00400000
> Jan 3 20:33:34 debian kernel: [55441.458016] wanpipe1: First TSlot
> :22
> Jan 3 20:33:34 debian kernel: [55441.458030] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.458036] wanpipe1: Active Ch Map
> :0x00800000
> Jan 3 20:33:34 debian kernel: [55441.458037] wanpipe1: First TSlot
> :23
> Jan 3 20:33:34 debian kernel: [55441.458051] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.458057] wanpipe1: Active Ch Map
> :0x01000000
> Jan 3 20:33:34 debian kernel: [55441.458058] wanpipe1: First TSlot
> :24
> Jan 3 20:33:34 debian kernel: [55441.458072] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.458078] wanpipe1: Active Ch Map
> :0x02000000
> Jan 3 20:33:34 debian kernel: [55441.458079] wanpipe1: First TSlot
> :25
> Jan 3 20:33:34 debian kernel: [55441.458094] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.458100] wanpipe1: Active Ch Map
> :0x04000000
> Jan 3 20:33:34 debian kernel: [55441.458101] wanpipe1: First TSlot
> :26
> Jan 3 20:33:34 debian kernel: [55441.458116] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.458122] wanpipe1: Active Ch Map
> :0x08000000
> Jan 3 20:33:34 debian kernel: [55441.458123] wanpipe1: First TSlot
> :27
> Jan 3 20:33:34 debian kernel: [55441.458137] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.458143] wanpipe1: Active Ch Map
> :0x10000000
> Jan 3 20:33:34 debian kernel: [55441.458144] wanpipe1: First TSlot
> :28
> Jan 3 20:33:34 debian kernel: [55441.458160] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.458166] wanpipe1: Active Ch Map
> :0x20000000
> Jan 3 20:33:34 debian kernel: [55441.458167] wanpipe1: First TSlot
> :29
> Jan 3 20:33:34 debian kernel: [55441.458181] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.458187] wanpipe1: Active Ch Map
> :0x40000000
> Jan 3 20:33:34 debian kernel: [55441.458188] wanpipe1: First TSlot
> :30
> Jan 3 20:33:34 debian kernel: [55441.458202] wanpipe1: Configuring
> Interface: w1g1 (log supress)
> Jan 3 20:33:34 debian kernel: [55441.458205] wanpipe1: Configuring TDMV
> Master dev w1g1
> Jan 3 20:33:34 debian kernel: [55441.458209] wanpipe1: Active Ch Map
> :0x80000000
> Jan 3 20:33:34 debian kernel: [55441.458210] wanpipe1: First TSlot
> :31
> Jan 3 20:33:34 debian kernel: [55441.458226] wanpipe1: Enable Zaptel HW
> DCHAN interface
> Jan 3 20:33:34 debian kernel: [55441.458462] wanpipe1: Wanpipe device is
> registered to Zaptel span # 1!
> Jan 3 20:33:34 debian kernel: [55441.458760] wanpipe1: TDM Free Run Timing
> Enabled 1 ms
> Jan 3 20:33:34 debian kernel: [55441.464708] wanpipe1: Wanpipe Front End
> Interrupt Restart Timeout
> Jan 3 20:33:40 debian kernel: [55450.402880] wanpipe1: E1 connected!
> Jan 3 20:33:40 debian kernel: [55450.407421] wanpipe1: AFT communications
> enabled!
> Jan 3 20:33:40 debian kernel: [55450.407421] wanpipe1: AFT Global TDM Intr
> Jan 3 20:33:40 debian kernel: [55450.409902] wanpipe1: Global TDM Ring
> Resync
> Jan 3 20:33:41 debian kernel: [55452.785733] wanpipe1: Enable E1 CCS
> Signalling mode!
>
>
> debian*CLI> core show version
> Asterisk 1.6.2.0 built by root @ debian on a i686 running Linux on
> 2011-01-03 08:57:50 UTC
>
>
> debian*CLI> ss7 show linkset 1
> SS7 linkset 1 status: Down
>
>
> debian*CLI> ss7 set debug off linkset 1
> Enabled debugging on linkset 1
> Len = 4 [ ff ff 01 03 ]
> FSN: 127 FIB 1
> BSN: 127 BIB 1
> <[0] LSSU SIOS
>
> Link state change: NOTALIGNED -> NOTALIGNED
> Len = 4 [ ff ff 01 00 ]
> FSN: 127 FIB 1
> BSN: 127 BIB 1
> <[0] LSSU SIO
>
> Link state change: NOTALIGNED -> ALIGNED
> Len = 4 [ ff ff 01 02 ]
> FSN: 127 FIB 1
> BSN: 127 BIB 1
> >[0] LSSU SIE
>
> Link state change: ALIGNED -> IDLE
> Link state change: IDLE -> NOTALIGNED
> Len = 4 [ ff ff 01 00 ]
> FSN: 127 FIB 1
> BSN: 127 BIB 1
> >[0] LSSU SIO
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
--
wasim h. baig | principal consultant | convergence pk | +92 30 0850 8070 |
peace be upon you ...
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20110104/dce4e1ca/attachment-0001.html
More information about the FreeSWITCH-users
mailing list