Hi<br>
<br>This question pertains libss7 with Sangoma A108 card on Asterisk. It does not concern freeswitch but I suppose Sangoma folks frequent this list more :)<br><br>
I am unable to make libss7 work with Sangoma. Here are the details.<br>
<br>
Could you please provide me some pointers ?<br>
<br>
Thanks,<br>Anita. <br>
<br>
debian:~# uname -a<br>
Linux debian 2.6.26-2-686 #1 SMP Thu Nov 25 01:53:57 UTC 2010 i686 GNU/Linux<br>
<br>
debian:~# dahdi_hardware<br>
pci:0000:05:04.0 wanpipe- 1923:0100 Sangoma Technologies Corp. A104d QUAD T1/E1 AFT card<br>
pci:0000:07:04.0 wanpipe- 1923:0100 Sangoma Technologies Corp. A104d QUAD T1/E1 AFT card<br>
<br>
<br>
<br>
debian:~# cat /etc/dahdi/system.conf<br>
#autogenerated by /usr/sbin/wancfg_dahdi do not hand edit<br>
#autogenrated on 2011-01-03<br>
#Dahdi Channels Configurations<br>
#For detailed Dahdi options, view /etc/dahdi/system.conf.bak<br>
loadzone=us<br>
defaultzone=us<br>
<br>
#Sangoma A108 port 1 [slot:4 bus:5 span:1] <wanpipe1><br>
span=1,1,0,ccs,hdb3,crc4<br>
bchan=1-15,17-31<br>
echocanceller=mg2,1-15,17-31<br>
mtp2=16<br>
<br>
#Sangoma A108 port 2 [slot:4 bus:5 span:2] <wanpipe2><br>
span=2,1,0,ccs,hdb3,crc4<br>
bchan=32-46,48-62<br>
echocanceller=mg2,32-46,48-62<br>
mtp2=47<br>
<br>
<br>
debian:~# cat /etc/wanpipe/wanpipe1.conf<br>
#=============================<div class="gmail_quote">===================<br>
# WANPIPE1 Configuration File<br>
#================================================<br>
#<br>
# Date: Wed Dec 6 20:29:03 UTC 2006<br>
#<br>
# Note: This file was generated automatically<br>
# by /usr/local/sbin/setup-sangoma program.<br>
#<br>
# If you want to edit this file, it is<br>
# recommended that you use wancfg program<br>
# to do so.<br>
#================================================<br>
# Sangoma Technologies Inc.<br>
#================================================<br>
<br>
[devices]<br>
wanpipe1 = WAN_AFT_TE1, Comment<br>
<br>
[interfaces]<br>
w1g1 = wanpipe1, , TDM_VOICE, Comment<br>
<br>
[wanpipe1]<br>
CARD_TYPE = AFT<br>
S514CPU = A<br>
CommPort = PRI<br>
AUTO_PCISLOT = NO<br>
PCISLOT = 4<br>
PCIBUS = 5<br>
FE_MEDIA = E1<br>
FE_LCODE = HDB3<br>
FE_FRAME = NCRC4<br>
FE_LINE = 1<br>
TE_CLOCK = NORMAL<br>
TE_REF_CLOCK = 0<br>
TE_SIG_MODE = CCS<br>
TE_HIGHIMPEDANCE = NO<br>
LBO = 120OH<br>
FE_TXTRISTATE = NO<br>
MTU = 1500<br>
UDPPORT = 9000<br>
TTL = 255<br>
IGNORE_FRONT_END = NO<br>
TDMV_SPAN = 1<br>
TDMV_DCHAN = 16<br>
TDMV_HW_DTMF = NO<br>
TDMV_HW_FAX_DETECT = NO<br>
<br>
[w1g1]<br>
ACTIVE_CH = ALL<br>
TDMV_HWEC = NO<br>
<br>
<br>
debian:~# cat /etc/wanpipe/wanpipe2.conf<br>
#================================================<br>
# WANPIPE1 Configuration File<br>
#================================================<br>
#<br>
# Date: Wed Dec 6 20:29:03 UTC 2006<br>
#<br>
# Note: This file was generated automatically<br>
# by /usr/local/sbin/setup-sangoma program.<br>
#<br>
# If you want to edit this file, it is<br>
# recommended that you use wancfg program<br>
# to do so.<br>
#================================================<br>
# Sangoma Technologies Inc.<br>
#================================================<br>
<br>
[devices]<br>
wanpipe2 = WAN_AFT_TE1, Comment<br>
<br>
[interfaces]<br>
w2g1 = wanpipe2, , TDM_VOICE, Comment<br>
<br>
[wanpipe2]<br>
CARD_TYPE = AFT<br>
S514CPU = A<br>
CommPort = PRI<br>
AUTO_PCISLOT = NO<br>
PCISLOT = 4<br>
PCIBUS = 5<br>
FE_MEDIA = E1<br>
FE_LCODE = HDB3<br>
FE_FRAME = NCRC4<br>
FE_LINE = 2<br>
TE_CLOCK = NORMAL<br>
TE_REF_CLOCK = 0<br>
TE_SIG_MODE = CCS<br>
TE_HIGHIMPEDANCE = NO<br>
LBO = 120OH<br>
FE_TXTRISTATE = NO<br>
MTU = 1500<br>
UDPPORT = 9000<br>
TTL = 255<br>
IGNORE_FRONT_END = NO<br>
TDMV_SPAN = 2<br>
TDMV_DCHAN = 16<br>
TDMV_HW_DTMF = NO<br>
TDMV_HW_FAX_DETECT = NO<br>
<br>
[w2g1]<br>
ACTIVE_CH = ALL<br>
TDMV_HWEC = NO<br>
<br>
debian:~# cat /etc/asterisk/chan_dahdi.conf<br>
;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit<br>
;autogenrated on 2011-01-03<br>
;Dahdi Channels Configurations<br>
;For detailed Dahdi options, view /etc/asterisk/chan_dahdi.conf.bak<br>
<br>
[trunkgroups]<br>
<br>
[channels]<br>
context=default<br>
usecallerid=yes<br>
hidecallerid=no<br>
callwaiting=yes<br>
usecallingpres=yes<br>
callwaitingcallerid=yes<br>
threewaycalling=yes<br>
transfer=yes<br>
canpark=yes<br>
cancallforward=yes<br>
callreturn=yes<br>
echocancel=yes<br>
echocancelwhenbridged=yes<br>
relaxdtmf=yes<br>
rxgain=0.0<br>
txgain=0.0<br>
group=1<br>
callgroup=1<br>
pickupgroup=1<br>
immediate=no<br>
<br>
;Sangoma A108 port 1 [slot:4 bus:5 span:1] <wanpipe1><br>
switchtype=euroisdn<br>
context=tata<br>
group=1<br>
echocancel=yes<br>
signaling=ss7 ;this is ss7 signaling<br>
ss7type=itu ;using the ITU variant<br>
ss7_called_nai=dynamic ;NAI for outgoing calls<br>
ss7_calling_nai=dynamic ;NAI for incoming calls<br>
ss7_internationalprefix=00 ;international prefix value for incoming calls<br>
ss7_nationalprefix=0 ;national prefix value for incoming calls<br>
ss7_subscriberprefix= ;subscriber prefix value for incoming calls<br>
ss7_unknownprefix= ;unknown prefix value for incoming calls<br>
ss7_explictacm=yes ;ACM is send as soon as call enters the dial plan...may not accepted yet though<br>
linkset=1 ;arbitrary name for this set of channels<br>
pointcode=13323 ;the point code for this system...aka SPC<br>
adjpointcode=12650 ;the point code for the system that we are signaling to... aka APC<br>
defaultdpc=12650 ;the point code for the system that the CICs will be negotiated with...aka DPC<br>
networkindicator=international ;NI value for MTP3<br>
cicbeginswith=1 ;the starting value of the CICs<br>
channel =>1-15<br>
cicbeginswith=17 ;the starting value of the CICs<br>
channel =>17-31 ;the channels that are CICs<br>
sigchan=16 ;the signaling channel<br>
<br>
;Sangoma A108 port 2 [slot:4 bus:5 span:2] <wanpipe2><br>
switchtype=euroisdn<br>
context=tata<br>
group=1<br>
echocancel=yes<br>
cicbeginswith=32 ;the starting value of the CICs<br>
channel =>32-46<br>
cicbeginswith=48 ;the starting value of the CICs<br>
channel =>48-62 ;the channels that are CICs<br>
sigchan=47 ;the signaling channel<br>
<br>
<br>
debian:~# ifconfig w1g1<br>
w1g1 Link encap:Point-to-Point Protocol<br>
UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1<br>
RX packets:772814 errors:0 dropped:0 overruns:0 frame:0<br>
TX packets:772814 errors:0 dropped:0 overruns:3 carrier:0<br>
collisions:0 txqueuelen:100<br>
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)<br>
Interrupt:16 Memory:f8d00000-f8d01fff<br>
<br>
debian:~# ifconfig w1g1<br>
w1g1 Link encap:Point-to-Point Protocol<br>
UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1<br>
RX packets:774782 errors:0 dropped:0 overruns:0 frame:0<br>
TX packets:774782 errors:0 dropped:0 overruns:3 carrier:0<br>
collisions:0 txqueuelen:100<br>
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)<br>
Interrupt:16 Memory:f8d00000-f8d01fff<br>
<br>
debian:~# ifconfig w1g1<br>
w1g1 Link encap:Point-to-Point Protocol<br>
UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1<br>
RX packets:775351 errors:0 dropped:0 overruns:0 frame:0<br>
TX packets:775351 errors:0 dropped:0 overruns:3 carrier:0<br>
collisions:0 txqueuelen:100<br>
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)<br>
Interrupt:16 Memory:f8d00000-f8d01fff<br>
<br>
debian:~# ifconfig w1g1<br>
w1g1 Link encap:Point-to-Point Protocol<br>
UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1<br>
RX packets:775919 errors:0 dropped:0 overruns:0 frame:0<br>
TX packets:775919 errors:0 dropped:0 overruns:3 carrier:0<br>
collisions:0 txqueuelen:100<br>
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)<br>
Interrupt:16 Memory:f8d00000-f8d01fff<br>
<br>
debian:~# ifconfig w1g1<br>
w1g1 Link encap:Point-to-Point Protocol<br>
UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1<br>
RX packets:776478 errors:0 dropped:0 overruns:0 frame:0<br>
TX packets:776478 errors:0 dropped:0 overruns:3 carrier:0<br>
collisions:0 txqueuelen:100<br>
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)<br>
Interrupt:16 Memory:f8d00000-f8d01fff<br>
<br>
debian:~# ifconfig w1g1<br>
w1g1 Link encap:Point-to-Point Protocol<br>
UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1<br>
RX packets:777079 errors:0 dropped:0 overruns:0 frame:0<br>
TX packets:777079 errors:0 dropped:0 overruns:3 carrier:0<br>
collisions:0 txqueuelen:100<br>
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)<br>
Interrupt:16 Memory:f8d00000-f8d01fff<br>
<br>
debian:~# ifconfig w1g1<br>
w1g1 Link encap:Point-to-Point Protocol<br>
UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1<br>
RX packets:778134 errors:0 dropped:0 overruns:0 frame:0<br>
TX packets:778134 errors:0 dropped:0 overruns:3 carrier:0<br>
collisions:0 txqueuelen:100<br>
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)<br>
Interrupt:16 Memory:f8d00000-f8d01fff<br>
<br>
<br>
debian:~# ifconfig w2g1<br>
w2g1 Link encap:Point-to-Point Protocol<br>
UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1<br>
RX packets:792251 errors:0 dropped:0 overruns:0 frame:0<br>
TX packets:792251 errors:0 dropped:0 overruns:1 carrier:0<br>
collisions:0 txqueuelen:100<br>
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)<br>
Interrupt:16 Memory:f8d00000-f8d01fff<br>
<br>
debian:~# ifconfig w2g1<br>
w2g1 Link encap:Point-to-Point Protocol<br>
UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1<br>
RX packets:792715 errors:0 dropped:0 overruns:0 frame:0<br>
TX packets:792715 errors:0 dropped:0 overruns:1 carrier:0<br>
collisions:0 txqueuelen:100<br>
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)<br>
Interrupt:16 Memory:f8d00000-f8d01fff<br>
<br>
debian:~# ifconfig w2g1<br>
w2g1 Link encap:Point-to-Point Protocol<br>
UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1<br>
RX packets:793219 errors:0 dropped:0 overruns:0 frame:0<br>
TX packets:793219 errors:0 dropped:0 overruns:1 carrier:0<br>
collisions:0 txqueuelen:100<br>
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)<br>
Interrupt:16 Memory:f8d00000-f8d01fff<br>
<br>
<br>
wanpipemon -i w2g1 -c Ta<br>
<br>
***** w2g1: E1 Alarms (Framer) *****<br>
<br>
ALOS: OFF | LOS: OFF<br>
RED: OFF | AIS: OFF<br>
LOF: OFF | RAI: OFF<br>
<br>
***** w2g1: E1 Alarms (LIU) *****<br>
<br>
Short Circuit: OFF<br>
Open Circuit: OFF<br>
Loss of Signal: OFF<br>
<br>
<br>
***** w2g1: E1 Performance Monitoring Counters *****<br>
<br>
Line Code Violation : 0<br>
Far End Block Errors : 0<br>
CRC4 Errors : 0<br>
FAS Errors : 0<br>
<br>
<br>
Rx Level : > -2.5db<br>
<br>
<br>
debian:~# wanpipemon -i w1g1 -c Ta<br>
<br>
***** w1g1: E1 Alarms (Framer) *****<br>
<br>
ALOS: OFF | LOS: OFF<br>
RED: OFF | AIS: OFF<br>
LOF: OFF | RAI: OFF<br>
<br>
***** w1g1: E1 Alarms (LIU) *****<br>
<br>
Short Circuit: OFF<br>
Open Circuit: OFF<br>
Loss of Signal: OFF<br>
<br>
<br>
***** w1g1: E1 Performance Monitoring Counters *****<br>
<br>
Line Code Violation : 371<br>
Far End Block Errors : 0<br>
CRC4 Errors : 0<br>
FAS Errors : 0<br>
<br>
<br>
Rx Level : > -2.5db<br>
<br>
<br>
Jan 3 20:33:34 debian kernel: [55441.172179] wanpipe1: Shutting Down!<br>
Jan 3 20:33:34 debian kernel: [55441.172179] wanpipe1: E1 Front End unconfigation!<br>
Jan 3 20:33:34 debian kernel: [55441.172179] wanpipe1: Unregister Wanpipe device from Zaptel!<br>
Jan 3 20:33:34 debian kernel: [55441.178246] wanpipe1: unregistering 'w1g1'<br>
Jan 3 20:33:34 debian kernel: [55441.248278] wanpipe1: TASKQ Not Running<br>
Jan 3 20:33:34 debian kernel: [55441.248281] wanpipe1: E1 Front End unconfigation!<br>
Jan 3 20:33:34 debian kernel: [55441.248314] wanpipe1: AFT communications disabled! (Dev Cnt: 1 Cause: Device Down)<br>
Jan 3 20:33:34 debian kernel: [55441.248335] wanpipe1: E1 Front End unconfigation!<br>
Jan 3 20:33:34 debian kernel: [55441.248373] wanpipe1: AFT communications disabled! (Dev Cnt: 1 Cause: Device Down)<br>
Jan 3 20:33:34 debian kernel: [55441.248415] wanpipe1: Global Chip Shutdown Usage=1<br>
Jan 3 20:33:34 debian kernel: [55441.248419] wanpipe1: Global E1 Front End unconfigation!<br>
Jan 3 20:33:34 debian kernel: [55441.250485] wanpipe1: Master shutting down<br>
Jan 3 20:33:34 debian kernel: [55441.444571] wanpipe1: Starting WAN Setup<br>
Jan 3 20:33:34 debian kernel: [55441.444575] wanpipe1: Locating: A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=4, PciBus=5<br>
Jan 3 20:33:34 debian kernel: [55441.444579] wanpipe1: Found: A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=4, PciBus=5, Port=0<br>
Jan 3 20:33:34 debian kernel: [55441.444599] wanpipe1: AFT PCI memory at 0xD3200000<br>
Jan 3 20:33:34 debian kernel: [55441.444600] wanpipe1: IRQ 16 allocated to the AFT PCI card<br>
Jan 3 20:33:34 debian kernel: [55441.444608] wanpipe1: Starting AFT 2/4/8 Hardware Init.<br>
Jan 3 20:33:34 debian kernel: [55441.444614] wanpipe1: Enabling front end link monitor<br>
Jan 3 20:33:34 debian kernel: [55441.444616] wanpipe1: Global Chip Configuration: used=1<br>
Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: Global E1 Front End configuration<br>
Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: AFT Data Mux Bit Map: 0x01234567<br>
Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: Defaulting E1 Rx Sens. Gain= 43 db<br>
Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: Configuring DS DS26528 E1 FE<br>
Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: Port 1,HDB3,non-CRC4,120OH<br>
Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: Clk Normal:0, Channels: FFFFFFFF<br>
Jan 3 20:33:34 debian kernel: [55441.448455] wanpipe1: Sig Mode CCS<br>
Jan 3 20:33:34 debian kernel: [55441.456490] wanpipe1: Rx Sensitivity Gain 43dB (default).<br>
Jan 3 20:33:34 debian kernel: [55441.457242] wanpipe1: Front end successful<br>
Jan 3 20:33:34 debian kernel: [55441.457469] wanpipe1: Front End Interface Ready 0x40000000<br>
Jan 3 20:33:34 debian kernel: [55441.457473] wanpipe1: WARNING: No Echo Canceller channels are available!<br>
Jan 3 20:33:34 debian kernel: [55441.457494] wanpipe1: Configuring Device :wanpipe1 FrmVr=39<br>
Jan 3 20:33:34 debian kernel: [55441.457495] wanpipe1: Global MTU = 1500<br>
Jan 3 20:33:34 debian kernel: [55441.457496] wanpipe1: Global MRU = 1500<br>
Jan 3 20:33:34 debian kernel: [55441.457497] wanpipe1: Data Mux Map = 0x01234567<br>
Jan 3 20:33:34 debian kernel: [55441.457498] wanpipe1: Rx CRC Bytes = 0<br>
Jan 3 20:33:34 debian kernel: [55441.457499] wanpipe1: Global TDM Int = Enabled<br>
Jan 3 20:33:34 debian kernel: [55441.457500] wanpipe1: Global TDM Ring = Enabled<br>
Jan 3 20:33:34 debian kernel: [55441.457501] wanpipe1: TDMV HW DTMF/FAX = Disabled/Disabled(0)<br>
Jan 3 20:33:34 debian kernel: [55441.457502] wanpipe1: TDMV Span = 1 : Enabled<br>
Jan 3 20:33:34 debian kernel: [55441.457503] wanpipe1: TDMV Dummy = Disabled<br>
Jan 3 20:33:34 debian kernel: [55441.457505] wanpipe1: RTP TAP = Disabled<br>
Jan 3 20:33:34 debian kernel: [55441.457540] wanpipe1: Configuring Interface: w1g1<br>
Jan 3 20:33:34 debian kernel: [55441.457543] wanpipe1:w1g1: Running in TDM Voice Zaptel Mode.<br>
Jan 3 20:33:34 debian kernel: [55441.457547] wanpipe1: Fifo Level Map:0x01041040<br>
Jan 3 20:33:34 debian kernel: [55441.457549] wanpipe1: MRU :8<br>
Jan 3 20:33:34 debian kernel: [55441.457550] wanpipe1: MTU :8<br>
Jan 3 20:33:34 debian kernel: [55441.457551] wanpipe1: HDLC Eng :Off (Transparent) | N/A<br>
Jan 3 20:33:34 debian kernel: [55441.457553] wanpipe1: Data Mux Ctrl :On<br>
Jan 3 20:33:34 debian kernel: [55441.457554] wanpipe1: Active Ch Map :0x00000002<br>
Jan 3 20:33:34 debian kernel: [55441.457555] wanpipe1: First TSlot :1<br>
Jan 3 20:33:34 debian kernel: [55441.457568] wanpipe1: DMA/Len/Chain/EC :4/1024/Off/Off<br>
Jan 3 20:33:34 debian kernel: [55441.457575] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.457581] wanpipe1: Active Ch Map :0x00000004<br>
Jan 3 20:33:34 debian kernel: [55441.457582] wanpipe1: First TSlot :2<br>
Jan 3 20:33:34 debian kernel: [55441.457597] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.457602] wanpipe1: Active Ch Map :0x00000008<br>
Jan 3 20:33:34 debian kernel: [55441.457603] wanpipe1: First TSlot :3<br>
Jan 3 20:33:34 debian kernel: [55441.457618] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.457623] wanpipe1: Active Ch Map :0x00000010<br>
Jan 3 20:33:34 debian kernel: [55441.457624] wanpipe1: First TSlot :4<br>
Jan 3 20:33:34 debian kernel: [55441.457637] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.457643] wanpipe1: Active Ch Map :0x00000020<br>
Jan 3 20:33:34 debian kernel: [55441.457644] wanpipe1: First TSlot :5<br>
Jan 3 20:33:34 debian kernel: [55441.457657] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.457663] wanpipe1: Active Ch Map :0x00000040<br>
Jan 3 20:33:34 debian kernel: [55441.457664] wanpipe1: First TSlot :6<br>
Jan 3 20:33:34 debian kernel: [55441.457678] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.457684] wanpipe1: Active Ch Map :0x00000080<br>
Jan 3 20:33:34 debian kernel: [55441.457685] wanpipe1: First TSlot :7<br>
Jan 3 20:33:34 debian kernel: [55441.457698] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.457705] wanpipe1: Active Ch Map :0x00000100<br>
Jan 3 20:33:34 debian kernel: [55441.457706] wanpipe1: First TSlot :8<br>
Jan 3 20:33:34 debian kernel: [55441.457719] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.457725] wanpipe1: Active Ch Map :0x00000200<br>
Jan 3 20:33:34 debian kernel: [55441.457726] wanpipe1: First TSlot :9<br>
Jan 3 20:33:34 debian kernel: [55441.457740] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.457746] wanpipe1: Active Ch Map :0x00000400<br>
Jan 3 20:33:34 debian kernel: [55441.457747] wanpipe1: First TSlot :10<br>
Jan 3 20:33:34 debian kernel: [55441.457760] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.457765] wanpipe1: Active Ch Map :0x00000800<br>
Jan 3 20:33:34 debian kernel: [55441.457766] wanpipe1: First TSlot :11<br>
Jan 3 20:33:34 debian kernel: [55441.457781] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.457786] wanpipe1: Active Ch Map :0x00001000<br>
Jan 3 20:33:34 debian kernel: [55441.457787] wanpipe1: First TSlot :12<br>
Jan 3 20:33:34 debian kernel: [55441.457801] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.457807] wanpipe1: Active Ch Map :0x00002000<br>
Jan 3 20:33:34 debian kernel: [55441.457808] wanpipe1: First TSlot :13<br>
Jan 3 20:33:34 debian kernel: [55441.457822] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.457828] wanpipe1: Active Ch Map :0x00004000<br>
Jan 3 20:33:34 debian kernel: [55441.457829] wanpipe1: First TSlot :14<br>
Jan 3 20:33:34 debian kernel: [55441.457842] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.457848] wanpipe1: Active Ch Map :0x00008000<br>
Jan 3 20:33:34 debian kernel: [55441.457849] wanpipe1: First TSlot :15<br>
Jan 3 20:33:34 debian kernel: [55441.457862] wanpipe1: Configuring Interface: w1g1<br>
Jan 3 20:33:34 debian kernel: [55441.457864] wanpipe1:w1g1: Running in TDM DCHAN Voice Zaptel Mode.<br>
Jan 3 20:33:34 debian kernel: [55441.457866] wanpipe1: MRU :1500<br>
Jan 3 20:33:34 debian kernel: [55441.457867] wanpipe1: MTU :1500<br>
Jan 3 20:33:34 debian kernel: [55441.457868] wanpipe1: HDLC Eng :On | N/A<br>
Jan 3 20:33:34 debian kernel: [55441.457869] wanpipe1: Data Mux Ctrl :Off<br>
Jan 3 20:33:34 debian kernel: [55441.457870] wanpipe1: Active Ch Map :0x00010000<br>
Jan 3 20:33:34 debian kernel: [55441.457871] wanpipe1: First TSlot :16<br>
Jan 3 20:33:34 debian kernel: [55441.457881] wanpipe1: DMA/Len/Chain/EC :65/4096/On/Off<br>
Jan 3 20:33:34 debian kernel: [55441.457905] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.457910] wanpipe1: Active Ch Map :0x00020000<br>
Jan 3 20:33:34 debian kernel: [55441.457911] wanpipe1: First TSlot :17<br>
Jan 3 20:33:34 debian kernel: [55441.457925] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.457931] wanpipe1: Active Ch Map :0x00040000<br>
Jan 3 20:33:34 debian kernel: [55441.457932] wanpipe1: First TSlot :18<br>
Jan 3 20:33:34 debian kernel: [55441.457945] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.457951] wanpipe1: Active Ch Map :0x00080000<br>
Jan 3 20:33:34 debian kernel: [55441.457952] wanpipe1: First TSlot :19<br>
Jan 3 20:33:34 debian kernel: [55441.457967] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.457973] wanpipe1: Active Ch Map :0x00100000<br>
Jan 3 20:33:34 debian kernel: [55441.457974] wanpipe1: First TSlot :20<br>
Jan 3 20:33:34 debian kernel: [55441.457987] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.457993] wanpipe1: Active Ch Map :0x00200000<br>
Jan 3 20:33:34 debian kernel: [55441.457994] wanpipe1: First TSlot :21<br>
Jan 3 20:33:34 debian kernel: [55441.458009] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.458015] wanpipe1: Active Ch Map :0x00400000<br>
Jan 3 20:33:34 debian kernel: [55441.458016] wanpipe1: First TSlot :22<br>
Jan 3 20:33:34 debian kernel: [55441.458030] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.458036] wanpipe1: Active Ch Map :0x00800000<br>
Jan 3 20:33:34 debian kernel: [55441.458037] wanpipe1: First TSlot :23<br>
Jan 3 20:33:34 debian kernel: [55441.458051] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.458057] wanpipe1: Active Ch Map :0x01000000<br>
Jan 3 20:33:34 debian kernel: [55441.458058] wanpipe1: First TSlot :24<br>
Jan 3 20:33:34 debian kernel: [55441.458072] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.458078] wanpipe1: Active Ch Map :0x02000000<br>
Jan 3 20:33:34 debian kernel: [55441.458079] wanpipe1: First TSlot :25<br>
Jan 3 20:33:34 debian kernel: [55441.458094] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.458100] wanpipe1: Active Ch Map :0x04000000<br>
Jan 3 20:33:34 debian kernel: [55441.458101] wanpipe1: First TSlot :26<br>
Jan 3 20:33:34 debian kernel: [55441.458116] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.458122] wanpipe1: Active Ch Map :0x08000000<br>
Jan 3 20:33:34 debian kernel: [55441.458123] wanpipe1: First TSlot :27<br>
Jan 3 20:33:34 debian kernel: [55441.458137] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.458143] wanpipe1: Active Ch Map :0x10000000<br>
Jan 3 20:33:34 debian kernel: [55441.458144] wanpipe1: First TSlot :28<br>
Jan 3 20:33:34 debian kernel: [55441.458160] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.458166] wanpipe1: Active Ch Map :0x20000000<br>
Jan 3 20:33:34 debian kernel: [55441.458167] wanpipe1: First TSlot :29<br>
Jan 3 20:33:34 debian kernel: [55441.458181] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.458187] wanpipe1: Active Ch Map :0x40000000<br>
Jan 3 20:33:34 debian kernel: [55441.458188] wanpipe1: First TSlot :30<br>
Jan 3 20:33:34 debian kernel: [55441.458202] wanpipe1: Configuring Interface: w1g1 (log supress)<br>
Jan 3 20:33:34 debian kernel: [55441.458205] wanpipe1: Configuring TDMV Master dev w1g1<br>
Jan 3 20:33:34 debian kernel: [55441.458209] wanpipe1: Active Ch Map :0x80000000<br>
Jan 3 20:33:34 debian kernel: [55441.458210] wanpipe1: First TSlot :31<br>
Jan 3 20:33:34 debian kernel: [55441.458226] wanpipe1: Enable Zaptel HW DCHAN interface<br>
Jan 3 20:33:34 debian kernel: [55441.458462] wanpipe1: Wanpipe device is registered to Zaptel span # 1!<br>
Jan 3 20:33:34 debian kernel: [55441.458760] wanpipe1: TDM Free Run Timing Enabled 1 ms<br>
Jan 3 20:33:34 debian kernel: [55441.464708] wanpipe1: Wanpipe Front End Interrupt Restart Timeout<br>
Jan 3 20:33:40 debian kernel: [55450.402880] wanpipe1: E1 connected!<br>
Jan 3 20:33:40 debian kernel: [55450.407421] wanpipe1: AFT communications enabled!<br>
Jan 3 20:33:40 debian kernel: [55450.407421] wanpipe1: AFT Global TDM Intr<br>
Jan 3 20:33:40 debian kernel: [55450.409902] wanpipe1: Global TDM Ring Resync<br>
Jan 3 20:33:41 debian kernel: [55452.785733] wanpipe1: Enable E1 CCS Signalling mode!<br>
<br>
<br>
debian*CLI> core show version<br>
Asterisk 1.6.2.0 built by root @ debian on a i686 running Linux on 2011-01-03 08:57:50 UTC<br>
<br>
<br>
debian*CLI> ss7 show linkset 1<br>
SS7 linkset 1 status: Down<br>
<br>
<br>
debian*CLI> ss7 set debug off linkset 1<br>
Enabled debugging on linkset 1<br>
Len = 4 [ ff ff 01 03 ]<br>
FSN: 127 FIB 1<br>
BSN: 127 BIB 1<br>
<[0] LSSU SIOS<br>
<br>
Link state change: NOTALIGNED -> NOTALIGNED<br>
Len = 4 [ ff ff 01 00 ]<br>
FSN: 127 FIB 1<br>
BSN: 127 BIB 1<br>
<[0] LSSU SIO<br>
<br>
Link state change: NOTALIGNED -> ALIGNED<br>
Len = 4 [ ff ff 01 02 ]<br>
FSN: 127 FIB 1<br>
BSN: 127 BIB 1<br>
>[0] LSSU SIE<br>
<br>
Link state change: ALIGNED -> IDLE<br>
Link state change: IDLE -> NOTALIGNED<br>
Len = 4 [ ff ff 01 00 ]<br>
FSN: 127 FIB 1<br>
BSN: 127 BIB 1<br>
>[0] LSSU SIO</div>