[Freeswitch-users] 2 endpoints behing NATs
David Ponzone
david.ponzone at ipeva.fr
Wed Sep 1 02:41:41 PDT 2010
Stas,
FS includes a RTP Proxy with server-side NAT-traversal capabilities.
So this should work if you register your phones to the internal
dialplan, which you probably do.
In the Sip Account/Advanced tab settings of X-lite, you have to check
"Use rport".
After that, you can check on FS if the NAT was detected:
sofia status profile internal
You should see your 2 phones connected, each of them with a Contact
line.
If this Contact line does not include "fs_nat=yes", then the NAT was
not detected, which will probably happen if "Use rport" is missing.
That's a first step.
David Ponzone Direction Technique
email: david.ponzone at ipeva.fr
tel: 01 74 03 18 97
gsm: 06 66 98 76 34
Service Client IPeva
tel: 0811 46 26 26
www.ipeva.fr - www.ipeva-studio.com
Ce message et toutes les pièces jointes sont confidentiels et établis
à l'intention exclusive de ses destinataires. Toute utilisation ou
diffusion non autorisée est interdite. Tout message électronique est
susceptible d'altération. IPeva décline toute responsabilité au
titre de ce message s'il a été altéré, déformé ou falsifié. Si
vous n'êtes pas destinataire de ce message, merci de le détruire
immédiatement et d'avertir l'expéditeur.
Le 01/09/2010 à 11:25, Stas Khirman a écrit :
> Hi,
>
> Sorry for novice question:
>
> Successfully setup FreeSWITCH on publicly accessible IP using 1.0.6
> standard configuration. No changes in configuration, dial plan, etc…
>
> Basic tests (music,echo,etc) are working ok. However, the problem
> observed with call between two softphones (X-lite) behind NATs –
> call signal are coming through but no media. Both NATs are kind of
> typical household WiFi routers. Everything ok if one of softphones
> is connected without NAT.
>
> Does two NATs configuration supported by stock FreeSWITCH ? Can I
> make it work by changing some configuration parameters or I need
> something like RTP proxy or similar?
>
> Regards
> Stas
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100901/3b28a85b/attachment-0001.html
More information about the FreeSWITCH-users
mailing list