[Freeswitch-users] smg_prid not bridging the call

Michael Jerris mike at jerris.com
Wed Mar 10 02:01:46 PST 2010


What pri dialect is this?

On Mar 4, 2010, at 11:11 PM, lakshmanan ganapathy wrote:

> Ok. This is to say how the problem got solved.
> Need openzap 1047 or above version.
> Need wanpipe-3.5.8.6.smg_pri-v1.63.tgz 
> My telco is not accepting the display IE. 
> Finally setting disable_display_ie=yes in smg_pri.conf solved the issue.
> 
> Thanks for all.
> 
> On Sat, Feb 27, 2010 at 2:03 PM, Tomasz Augustyn <tomek.augustyn at gmail.com> wrote:
> Hello,
> 
> I had similar problem and I think it is more a problem between Sangoma card and your E1 provider than with freeswitch.
> 
> In my case it was necessary to set "origination_caller_id_number" to one of the telephone numbers linked to my E1 line. In other case the calls were rejected with "invalid information element" error.
> 
> You can try Sangoma's support they are very helpful.
> 
> Tomasz Augustyn

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100310/5be0a187/attachment-0002.html 


More information about the FreeSWITCH-users mailing list