[Freeswitch-users] smg_prid not bridging the call

[lakshmanan ganapathy]

My switch type is EuroISDN, and I used Q931 as the dialect.


On Wed, Mar 10, 2010 at 3:31 PM, Michael Jerris <mike at jerris.com> wrote:

> What pri dialect is this?
>
> On Mar 4, 2010, at 11:11 PM, lakshmanan ganapathy wrote:
>
> Ok. This is to say how the problem got solved.
> Need openzap 1047 or above version.
> Need wanpipe-3.5.8.6.smg_pri-v1.63.tgz
> My telco is not accepting the display IE.
> Finally setting disable_display_ie=yes in smg_pri.conf solved the issue.
>
> Thanks for all.
>
> On Sat, Feb 27, 2010 at 2:03 PM, Tomasz Augustyn <tomek.augustyn at gmail.com
> > wrote:
>
>> Hello,
>>
>> I had similar problem and I think it is more a problem between Sangoma
>> card and your E1 provider than with freeswitch.
>>
>> In my case it was necessary to set "origination_caller_id_number" to one
>> of the telephone numbers linked to my E1 line. In other case the calls were
>> rejected with "invalid information element" error.
>>
>> You can try Sangoma's support they are very helpful.
>>
>> Tomasz Augustyn
>>
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100311/9fa32969/attachment-0002.html