[Freeswitch-users] smg_prid not bridging the call

[lakshmanan ganapathy]

Ok. This is to say how the problem got solved.
Need openzap 1047 or above version.
Need wanpipe-3.5.8.6.smg_pri-v1.63.tgz
My telco is not accepting the display IE.
Finally setting disable_display_ie=yes in smg_pri.conf solved the issue.

Thanks for all.

On Sat, Feb 27, 2010 at 2:03 PM, Tomasz Augustyn
<tomek.augustyn at gmail.com>wrote:

> Hello,
>
> I had similar problem and I think it is more a problem between Sangoma card
> and your E1 provider than with freeswitch.
>
> In my case it was necessary to set "origination_caller_id_number" to one
> of the telephone numbers linked to my E1 line. In other case the calls were
> rejected with "invalid information element" error.
>
> You can try Sangoma's support they are very helpful.
>
> Tomasz Augustyn
>
>
> ---------- Forwarded message ----------
> From: lakshmanan ganapathy <lakindia89 at gmail.com>
> To: freeswitch-users at lists.freeswitch.org
> Date: Sat, 27 Feb 2010 10:32:08 +0530
> Subject: Re: [Freeswitch-users] smg_prid not bridging the call
> In the Dchan log it is saying Invalid Information Elements. That might be a
> problem??? But I even don't know why it is saying Invalid Information
> Element??
> Please guide me!!!
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100305/90a0efd1/attachment-0002.html