[Freeswitch-users] smg_prid not bridging the call

[lakshmanan ganapathy]

I think it says Invalid Information Element for the DISPLAY
smg_prid/a/8122133885!!!
correct?? If so, can you please help me to solve this?

On Sat, Feb 27, 2010 at 10:32 AM, lakshmanan ganapathy <lakindia89 at gmail.com
> wrote:

> In the Dchan log it is saying Invalid Information Elements. That might be a
> problem??? But I even don't know why it is saying Invalid Information
> Element??
> Please guide me!!!
>
>
>
> On Sat, Feb 27, 2010 at 10:27 AM, lakshmanan ganapathy <
> lakindia89 at gmail.com> wrote:
>
>> Dear Moy,
>> Here are the details:
>>
>> FreeSwitch Log:
>> http://pastebin.freeswitch.org/12256
>>
>>  /var/log/sangoma_pri/dchan_<span-no>.log:
>>  http://pastebin.freeswitch.org/12257
>>
>> /var/log/sangoma_mgd.log:
>> http://pastebin.freeswitch.org/12258
>>
>> smg_pri.conf
>> http://pastebin.freeswitch.org/12259
>>
>>
>>
>> On Fri, Feb 26, 2010 at 9:01 PM, Moises Silva <moises.silva at gmail.com>wrote:
>>
>>> Hello lakshmanan,
>>>
>>> Please enable the dchan_log=q931 in /etc/wanpipe/smg_pri.conf and then
>>> restart it (smg_ctrl restart), then pastebin the logs
>>>
>>>  /var/log/sangoma_pri/dchan_<span-no>.log
>>> /var/log/sangoma_mgd.log
>>>
>>> That will contain the Q931 details (if any). Also pastebin your
>>> smg_pri.conf.
>>>
>>> Also enable the FreeSWITCH debug logging (see the FreeSWITCH wiki for
>>> details about that) and paste them too.
>>>
>>> --
>>> Moises Silva
>>> Senior Software Engineer
>>> Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R
>>> 9T3 Canada
>>> t. 1 905 474 1990 x 128 | e. moy at sangoma.com
>>>
>>>  On Fri, Feb 26, 2010 at 12:55 AM, lakshmanan ganapathy <
>>> lakindia89 at gmail.com> wrote:
>>>
>>>>  Dear all,
>>>> I'm having a A102 Sangoma hardware. I configured it with freeswitch.
>>>> wanrouter status, says both the port as connected.
>>>> My smg_prid version is
>>>>
>>>> Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: ================System
>>>> restart=============
>>>> Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: = Sangoma PRI Protocol
>>>> Stack Daemon       =
>>>> Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: = Version:
>>>> 1.54                           =
>>>> Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: = Date: Feb 15
>>>> 2010                       =
>>>> Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: = Wanpipe Release:
>>>> wanpipe-3.5.8.6       =
>>>> Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: = Revision:Revision:
>>>> 15288                =
>>>> Feb 26 16:08:14 FMS-FreeSwitch
>>>> sangoma_prid:
>>>> ===========================================
>>>>
>>>> My freeswitch version is 16729.
>>>> I started freeswitch.
>>>>
>>>> oz list
>>>> +OK
>>>> span: 1 (smg_prid)
>>>> type: Sangoma (boost)
>>>> chan_count: 60
>>>> dialplan: XML
>>>> context: default
>>>> dial_regex:
>>>> fail_dial_regex:
>>>> hold_music:
>>>> analog_options none
>>>>
>>>> I originated a call as
>>>> originate openzap/smg_prid/a/9952248266 &park(), which hits my mobile.
>>>>
>>>> But when I issued the following command:
>>>> originate openzap/smg_prid/a/9952248266
>>>> &bridge(openzap/smg_prid/a/8122133885)
>>>> It rings my mobile (9952248266) first, but after that the following
>>>> error was displayed
>>>>
>>>> 2010-02-26 16:20:51.736080 [ERR] switch_ivr_originate.c:2387 Cannot
>>>> create outgoing channel of type [openzap] cause: [NORMAL_CIRCUIT_CONGESTION]
>>>> The call got ended in my mobile.
>>>>
>>>> Freeswitch log and smg_pri.conf
>>>>           http://pastebin.freeswitch.org/12248
>>>> openzap.conf:
>>>> [span wanpipe smg_prid]
>>>> name => smg_prid
>>>> trunk_type =>e1
>>>> b-channel => 1:1-15
>>>> b-channel => 1:17-31
>>>> trunk_type =>e1
>>>> b-channel => 2:1-15
>>>> b-channel => 2:17-31
>>>>
>>>> openzap.conf.xml:
>>>> <configuration name="openzap.conf" description="OpenZAP Configuration">
>>>>   <settings>
>>>>     <param name="debug" value="0"/>
>>>>   </settings>
>>>>   <boost_spans>
>>>>         <span id="smg_prid">
>>>>         <param name="dialplan" value="XML"/>
>>>>         <param name="context" value="default"/>
>>>>         </span>
>>>>   </boost_spans>
>>>> </configuration>
>>>>
>>>> Please guide me to setup this one!!.
>>>>
>>>>
>>>> _______________________________________________
>>>> FreeSWITCH-users mailing list
>>>> FreeSWITCH-users at lists.freeswitch.org
>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>> UNSUBSCRIBE:
>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>> http://www.freeswitch.org
>>>>
>>>>
>>>
>>> _______________________________________________
>>> FreeSWITCH-users mailing list
>>> FreeSWITCH-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> http://www.freeswitch.org
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100227/e7b3482b/attachment-0002.html