[Freeswitch-users] smg_prid not bridging the call

[lakshmanan ganapathy]

In the Dchan log it is saying Invalid Information Elements. That might be a
problem??? But I even don't know why it is saying Invalid Information
Element??
Please guide me!!!


On Sat, Feb 27, 2010 at 10:27 AM, lakshmanan ganapathy <lakindia89 at gmail.com
> wrote:

> Dear Moy,
> Here are the details:
>
> FreeSwitch Log:
> http://pastebin.freeswitch.org/12256
>
>  /var/log/sangoma_pri/dchan_<span-no>.log:
>  http://pastebin.freeswitch.org/12257
>
> /var/log/sangoma_mgd.log:
> http://pastebin.freeswitch.org/12258
>
> smg_pri.conf
> http://pastebin.freeswitch.org/12259
>
>
>
> On Fri, Feb 26, 2010 at 9:01 PM, Moises Silva <moises.silva at gmail.com>wrote:
>
>> Hello lakshmanan,
>>
>> Please enable the dchan_log=q931 in /etc/wanpipe/smg_pri.conf and then
>> restart it (smg_ctrl restart), then pastebin the logs
>>
>>  /var/log/sangoma_pri/dchan_<span-no>.log
>> /var/log/sangoma_mgd.log
>>
>> That will contain the Q931 details (if any). Also pastebin your
>> smg_pri.conf.
>>
>> Also enable the FreeSWITCH debug logging (see the FreeSWITCH wiki for
>> details about that) and paste them too.
>>
>> --
>> Moises Silva
>> Senior Software Engineer
>> Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R
>> 9T3 Canada
>> t. 1 905 474 1990 x 128 | e. moy at sangoma.com
>>
>>  On Fri, Feb 26, 2010 at 12:55 AM, lakshmanan ganapathy <
>> lakindia89 at gmail.com> wrote:
>>
>>>  Dear all,
>>> I'm having a A102 Sangoma hardware. I configured it with freeswitch.
>>> wanrouter status, says both the port as connected.
>>> My smg_prid version is
>>>
>>> Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: ================System
>>> restart=============
>>> Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: = Sangoma PRI Protocol Stack
>>> Daemon       =
>>> Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: = Version:
>>> 1.54                           =
>>> Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: = Date: Feb 15
>>> 2010                       =
>>> Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: = Wanpipe Release:
>>> wanpipe-3.5.8.6       =
>>> Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: = Revision:Revision:
>>> 15288                =
>>> Feb 26 16:08:14 FMS-FreeSwitch
>>> sangoma_prid:
>>> ===========================================
>>>
>>> My freeswitch version is 16729.
>>> I started freeswitch.
>>>
>>> oz list
>>> +OK
>>> span: 1 (smg_prid)
>>> type: Sangoma (boost)
>>> chan_count: 60
>>> dialplan: XML
>>> context: default
>>> dial_regex:
>>> fail_dial_regex:
>>> hold_music:
>>> analog_options none
>>>
>>> I originated a call as
>>> originate openzap/smg_prid/a/9952248266 &park(), which hits my mobile.
>>>
>>> But when I issued the following command:
>>> originate openzap/smg_prid/a/9952248266
>>> &bridge(openzap/smg_prid/a/8122133885)
>>> It rings my mobile (9952248266) first, but after that the following error
>>> was displayed
>>>
>>> 2010-02-26 16:20:51.736080 [ERR] switch_ivr_originate.c:2387 Cannot
>>> create outgoing channel of type [openzap] cause: [NORMAL_CIRCUIT_CONGESTION]
>>> The call got ended in my mobile.
>>>
>>> Freeswitch log and smg_pri.conf
>>>           http://pastebin.freeswitch.org/12248
>>> openzap.conf:
>>> [span wanpipe smg_prid]
>>> name => smg_prid
>>> trunk_type =>e1
>>> b-channel => 1:1-15
>>> b-channel => 1:17-31
>>> trunk_type =>e1
>>> b-channel => 2:1-15
>>> b-channel => 2:17-31
>>>
>>> openzap.conf.xml:
>>> <configuration name="openzap.conf" description="OpenZAP Configuration">
>>>   <settings>
>>>     <param name="debug" value="0"/>
>>>   </settings>
>>>   <boost_spans>
>>>         <span id="smg_prid">
>>>         <param name="dialplan" value="XML"/>
>>>         <param name="context" value="default"/>
>>>         </span>
>>>   </boost_spans>
>>> </configuration>
>>>
>>> Please guide me to setup this one!!.
>>>
>>>
>>> _______________________________________________
>>> FreeSWITCH-users mailing list
>>> FreeSWITCH-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> http://www.freeswitch.org
>>>
>>>
>>
>> _______________________________________________
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100227/03b7567c/attachment-0002.html