[Freeswitch-users] smg_prid not bridging the call
Moises Silva
moises.silva at gmail.com
Sat Feb 27 10:35:33 PST 2010
I believe the problem FreeSWITCH is setting that as a default callerid name,
which your telco does not like.
Try setting the caller id name and number by yourself as explained in the
"originate" section here http://wiki.freeswitch.org/wiki/Mod_commands
<http://wiki.freeswitch.org/wiki/Mod_commands>
On Sat, Feb 27, 2010 at 12:13 AM, lakshmanan ganapathy <lakindia89 at gmail.com
> wrote:
> I think it says Invalid Information Element for the DISPLAY
> smg_prid/a/8122133885!!!
> correct?? If so, can you please help me to solve this?
>
>
> On Sat, Feb 27, 2010 at 10:32 AM, lakshmanan ganapathy <
> lakindia89 at gmail.com> wrote:
>
>> In the Dchan log it is saying Invalid Information Elements. That might be
>> a problem??? But I even don't know why it is saying Invalid Information
>> Element??
>> Please guide me!!!
>>
>>
>>
>> On Sat, Feb 27, 2010 at 10:27 AM, lakshmanan ganapathy <
>> lakindia89 at gmail.com> wrote:
>>
>>> Dear Moy,
>>> Here are the details:
>>>
>>> FreeSwitch Log:
>>> http://pastebin.freeswitch.org/12256
>>>
>>> /var/log/sangoma_pri/dchan_<span-no>.log:
>>> http://pastebin.freeswitch.org/12257
>>>
>>> /var/log/sangoma_mgd.log:
>>> http://pastebin.freeswitch.org/12258
>>>
>>> smg_pri.conf
>>> http://pastebin.freeswitch.org/12259
>>>
>>>
>>>
>>> On Fri, Feb 26, 2010 at 9:01 PM, Moises Silva <moises.silva at gmail.com>wrote:
>>>
>>>> Hello lakshmanan,
>>>>
>>>> Please enable the dchan_log=q931 in /etc/wanpipe/smg_pri.conf and then
>>>> restart it (smg_ctrl restart), then pastebin the logs
>>>>
>>>> /var/log/sangoma_pri/dchan_<span-no>.log
>>>> /var/log/sangoma_mgd.log
>>>>
>>>> That will contain the Q931 details (if any). Also pastebin your
>>>> smg_pri.conf.
>>>>
>>>> Also enable the FreeSWITCH debug logging (see the FreeSWITCH wiki for
>>>> details about that) and paste them too.
>>>>
>>>> --
>>>> Moises Silva
>>>> Senior Software Engineer
>>>> Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R
>>>> 9T3 Canada
>>>> t. 1 905 474 1990 x 128 | e. moy at sangoma.com
>>>>
>>>> On Fri, Feb 26, 2010 at 12:55 AM, lakshmanan ganapathy <
>>>> lakindia89 at gmail.com> wrote:
>>>>
>>>>> Dear all,
>>>>> I'm having a A102 Sangoma hardware. I configured it with freeswitch.
>>>>> wanrouter status, says both the port as connected.
>>>>> My smg_prid version is
>>>>>
>>>>> Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: ================System
>>>>> restart=============
>>>>> Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: = Sangoma PRI Protocol
>>>>> Stack Daemon =
>>>>> Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: = Version:
>>>>> 1.54 =
>>>>> Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: = Date: Feb 15
>>>>> 2010 =
>>>>> Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: = Wanpipe Release:
>>>>> wanpipe-3.5.8.6 =
>>>>> Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: = Revision:Revision:
>>>>> 15288 =
>>>>> Feb 26 16:08:14 FMS-FreeSwitch
>>>>> sangoma_prid:
>>>>> ===========================================
>>>>>
>>>>> My freeswitch version is 16729.
>>>>> I started freeswitch.
>>>>>
>>>>> oz list
>>>>> +OK
>>>>> span: 1 (smg_prid)
>>>>> type: Sangoma (boost)
>>>>> chan_count: 60
>>>>> dialplan: XML
>>>>> context: default
>>>>> dial_regex:
>>>>> fail_dial_regex:
>>>>> hold_music:
>>>>> analog_options none
>>>>>
>>>>> I originated a call as
>>>>> originate openzap/smg_prid/a/9952248266 &park(), which hits my mobile.
>>>>>
>>>>> But when I issued the following command:
>>>>> originate openzap/smg_prid/a/9952248266
>>>>> &bridge(openzap/smg_prid/a/8122133885)
>>>>> It rings my mobile (9952248266) first, but after that the following
>>>>> error was displayed
>>>>>
>>>>> 2010-02-26 16:20:51.736080 [ERR] switch_ivr_originate.c:2387 Cannot
>>>>> create outgoing channel of type [openzap] cause: [NORMAL_CIRCUIT_CONGESTION]
>>>>> The call got ended in my mobile.
>>>>>
>>>>> Freeswitch log and smg_pri.conf
>>>>> http://pastebin.freeswitch.org/12248
>>>>> openzap.conf:
>>>>> [span wanpipe smg_prid]
>>>>> name => smg_prid
>>>>> trunk_type =>e1
>>>>> b-channel => 1:1-15
>>>>> b-channel => 1:17-31
>>>>> trunk_type =>e1
>>>>> b-channel => 2:1-15
>>>>> b-channel => 2:17-31
>>>>>
>>>>> openzap.conf.xml:
>>>>> <configuration name="openzap.conf" description="OpenZAP Configuration">
>>>>> <settings>
>>>>> <param name="debug" value="0"/>
>>>>> </settings>
>>>>> <boost_spans>
>>>>> <span id="smg_prid">
>>>>> <param name="dialplan" value="XML"/>
>>>>> <param name="context" value="default"/>
>>>>> </span>
>>>>> </boost_spans>
>>>>> </configuration>
>>>>>
>>>>> Please guide me to setup this one!!.
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> FreeSWITCH-users mailing list
>>>>> FreeSWITCH-users at lists.freeswitch.org
>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>> UNSUBSCRIBE:
>>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>>> http://www.freeswitch.org
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> FreeSWITCH-users mailing list
>>>> FreeSWITCH-users at lists.freeswitch.org
>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>> UNSUBSCRIBE:
>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>> http://www.freeswitch.org
>>>>
>>>>
>>>
>>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
--
Moises Silva
Senior Software Engineer
Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3
Canada
t. 1 905 474 1990 x 128 | e. moy at sangoma.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100227/4d266a48/attachment-0002.html
More information about the FreeSWITCH-users
mailing list