[Freeswitch-users] How to setup a span as PRI_NET

lakshmanan ganapathy lakindia89 at gmail.com
Thu Apr 8 21:38:35 PDT 2010 

Right now I can't provide you the ssh access to the box, since the company
policy doesn't allow to do so. But I can explain you more clearly about
the setup and my need.

The following is the setup.
>From a Telephone Exchange, a line will be connected to the FS-BOX,  in
span1.
We have an internal Hard PBX with some 4 extensions.
We have connected the Hard PBX to FS-BOX in span2.

I've configured span1 as PRI_CPE and span2 as PRI_NET.
span1 don't have any problems. Both incoming and outgoing works fine.
In span2, I was able to make incoming call. It rings the extension.
But when I make outgoing call from those extension, I got NO CIRCUIT OR
CHANNEL AVAILABLE.

Right now in sangoma_mgd log, I got the following when I make outgoing call.


Apr  8 10:20:21 FMS-FreeSwitch sangoma_prid: Opening
/var/log/sangoma_pri/dchan_2.log
Apr  8 10:20:21 FMS-FreeSwitch sangoma_prid: Rx Tsoft [s2c0 7:StatusIn
3:134716232 id:65535]
Apr  8 10:20:21 FMS-FreeSwitch sangoma_prid: Rx Tsoft [s2c0 7:StatusIn
4:134716308 id:65535]

Moreover I also have an Asterisk Box with Digim card. It works fine there.
When i dial from extension, it reaches asterisk and it responds with
SETUP_ACK.

please guide me.


On Wed, Apr 7, 2010 at 10:44 PM, David Yat Sin <david.yatsin at gmail.com>
wrote:
>
> Can you provide me with SSH access to that box and a phone number I can
use to trigger an incoming call on span 2 to that box?
>
> You can email me at: dyatsin at sangoma.com
>
> David
>
> On 4/7/2010 4:48 AM, lakshmanan ganapathy wrote:
>
> Hi,
> I have set verbose=4 in smg_pri.conf.
> I started the wanrouter.
> Here is the sangoma_mgd.log
> Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: ================System
restart=============
> Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: = Sangoma PRI Protocol Stack
Daemon       =
> Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: = Version: 1.63
            =
> Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: = Date: Feb 26 2010
            =
> Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: = Wanpipe Release:
wanpipe-3.5.8.6       =
> Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: = Revision:Revision: 15607
             =
> Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid:
===========================================
> Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: Number of spans:2
> Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: Verbosity set to:4
> Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: Log Debug disabled (local:2)
> Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: Log Boost disabled (local:6)
> Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: TSoft:span:1 pri_cpe euroisdn
dChan:16
> Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: TSoft:span:2 pri_net euroisdn
dChan:16
> Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: s2:Status:Up prot:Down
> Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: BST:(P) Local:
127.0.0.66:53001 Remote:127.0.0.65:53001
> Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: BST:(N) Local:
127.0.0.66:53000 Remote:127.0.0.65:53000
> Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: BST:Version:103
> Apr  7 13:58:27 FMS-FreeSwitch sangoma_prid: s2:Status:Up prot:Up
> Apr  7 13:58:31 FMS-FreeSwitch sangoma_prid: s1:Status:Up prot:Down
> Apr  7 13:58:32 FMS-FreeSwitch sangoma_prid: s1:Status:Up prot:Up
> Apr  7 13:58:37 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
(current:13:58:37 last:13:58:26 grace:0)
> Apr  7 13:58:43 FMS-FreeSwitch sangoma_prid: Opening
/var/log/sangoma_pri/dchan_1.log
> Apr  7 13:58:47 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
(current:13:58:47 last:13:58:37 grace:0)
> Apr  7 13:58:57 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
(current:13:58:57 last:13:58:47 grace:0)
> Apr  7 13:58:57 FMS-FreeSwitch sangoma_prid: Assuming application is dead
> Apr  7 13:59:07 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
(current:13:59:07 last:13:58:57 grace:0)
> Apr  7 13:59:17 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
(current:13:59:17 last:13:59:07 grace:0)
> Apr  7 13:59:27 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
(current:13:59:27 last:13:59:17 grace:0)
> Apr  7 13:59:27 FMS-FreeSwitch sangoma_prid: Assuming application is dead
> Apr  7 13:59:37 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
(current:13:59:37 last:13:59:27 grace:0)
> Apr  7 13:59:47 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
(current:13:59:47 last:13:59:37 grace:0)
> Apr  7 13:59:57 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
(current:13:59:57 last:13:59:47 grace:0)
> Apr  7 13:59:57 FMS-FreeSwitch sangoma_prid: Assuming application is dead
>
> >From freeswitch cli, if I say
> originate openzap/1/a/39114603 at g2 &park(), I got the following in the
sangoma_mgd.log.
>
> Apr  7 14:13:50 FMS-FreeSwitch sangoma_prid: g2:Outgoing call (Smg-ID:2)
> Apr  7 14:13:50 FMS-FreeSwitch sangoma_prid: s2:Outgoing call ChanRq:1
Called-Nb[39114603] Calling-Nb[Unknown] (Smg-ID:2)
> Apr  7 14:13:50 FMS-FreeSwitch sangoma_prid: s2c1:Remote
released-Unallocated (unassigned) number(1)
> Apr  7 14:13:50 FMS-FreeSwitch sangoma_prid: s2c0:Call was already cleared
(TSOFT-ID:4)
> Apr  7 14:13:50 FMS-FreeSwitch sangoma_prid: g2:Call cleared (SMG-ID:2)
>
> By seeing this, I confirmed that span2 is working. Leave out the
Unallocated number, that's my internal problem.
>
> >From the extension, if I dial 0, nothing is printing in sangoma_mgd.log
> But in dhcan2.log I got the No/Circuit or channel available as I mentioned
earlier.
>
> In freeswitch mod_openzap is loaded properly.
> Any help!!!
>
>
> On Wed, Apr 7, 2010 at 2:17 AM, David Yat Sin <david.yatsin at gmail.com>
wrote:
>>
>> Hi Lakshmanan,
>> If you do not have anything printing in /var/log/sangoma_mgd.log, and you
have:
>> verbose=4           //(or higher)
>>
>> in /etc/wanpipe/smg_pri.conf, check that you have these lines in
/etc/syslog.conf (or /etc/rsyslog.conf):
>>
>> local2.*                /var/log/sangoma_mgd.log
>>
>> and restart your syslog.
>>
>>
>> my first guess is that you do not have openzap loaded so sangoma_prid is
rejecting all incoming calls, but I would need logs in
/var/log/sangoma_mgd.log to confirm.
>>
>> If openzap is not loaded, you can type:
>> load mod_openzap
>>
>> from the freeswitch CLI to load it.
>>
>> --
>>
>> David Yat Sin, BEng, Software Developer
>> Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R
9T3 Canada
>> t. 1 905 474 1990 x 119 | e. dyatsin at sangoma.com
>>
>>
>>
>> On 4/6/2010 12:24 AM, lakshmanan ganapathy wrote:
>>
>> Hi all,
>> In my office we have a Hard PBX, with some 4 extensions.
>> We also have sangoma A102 card.
>> >From the Hard PBX, if 0 is pressed, it is setup in a way that it will go
to outside world.
>> I've connected that line to span2 of the card.
>> The span2 in the A102 card, is configured as PRI_NET.
>>
>> wanrouter status shows connected for the span2.
>>
>> But if I dial from the extension, I got the following in the
sangoma_dchan log.
>> 2010-04-03 12:49:49
>> INCOMING [ 00 01 54 50 08 02 01 64 05 04 03 80 90 a3 6c 0c 01 81 34 34 33
39 31 31 34 36 30 30 7d 02 91 81 ]
>>   Call Ref:0164
>>   Type:Setup (0x5)
>>   Bearer Capability:Coding:ITU-T(0) TransferCap:Speech(0) TransferRate:64
Kbit/s(16) L1Prot:G.711 A-Law(3)
>>   Calling Party Number:4439114600(l:10) plan:isdn(1)
type:unknown(0)scr:user, passed(1) pres:allowed(0)
>>   High-Layer Compatibility:Undecodedhex [ 7d 02 91 81 ]
>>
>> 2010-04-03 12:49:49
>> OUTGOING [ 02 01 50 56 08 02 81 64 5a 08 02 82 a2 ]
>>   Call Ref:0164
>>   Type:Release Compl (0x5a)
>>   Cause:coding:ITU-T(0) location:Public network, local user(2) val:No
Circuit/Channel Available(34)
>>
>> The call in not reaching freeswitch ( I enabled debug log. But nothing is
printing in it ).
>> Can someone suggest how to make this work.
>>
>> Please ask me if you need more information?, since I don't know what to
give now.
>>
>>
>> _______________________________________________
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>>
>> _______________________________________________
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100409/16bc633b/attachment-0001.html

More information about the FreeSWITCH-users mailing list