[Freeswitch-users] How to setup a span as PRI_NET
David Yat Sin
david.yatsin at gmail.com
Wed Apr 7 10:14:27 PDT 2010
Can you provide me with SSH access to that box and a phone number I can
use to trigger an incoming call on span 2 to that box?
You can email me at: dyatsin at sangoma.com
David
On 4/7/2010 4:48 AM, lakshmanan ganapathy wrote:
> Hi,
> I have set verbose=4 in smg_pri.conf.
> I started the wanrouter.
> Here is the sangoma_mgd.log
> Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: ================System
> restart=============
> Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Sangoma PRI Protocol
> Stack Daemon =
> Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Version:
> 1.63 =
> Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Date: Feb 26
> 2010 =
> Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Wanpipe Release:
> wanpipe-3.5.8.6 =
> Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: = Revision:Revision:
> 15607 =
> Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid:
> ===========================================
> Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: Number of spans:2
> Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: Verbosity set to:4
> Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: Log Debug disabled (local:2)
> Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: Log Boost disabled (local:6)
> Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: TSoft:span:1 pri_cpe
> euroisdn dChan:16
> Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: TSoft:span:2 pri_net
> euroisdn dChan:16
> Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: s2:Status:Up prot:Down
> Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: BST:(P)
> Local:127.0.0.66:53001 <http://127.0.0.66:53001>
> Remote:127.0.0.65:53001 <http://127.0.0.65:53001>
> Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: BST:(N)
> Local:127.0.0.66:53000 <http://127.0.0.66:53000>
> Remote:127.0.0.65:53000 <http://127.0.0.65:53000>
> Apr 7 13:58:25 FMS-FreeSwitch sangoma_prid: BST:Version:103
> Apr 7 13:58:27 FMS-FreeSwitch sangoma_prid: s2:Status:Up prot:Up
> Apr 7 13:58:31 FMS-FreeSwitch sangoma_prid: s1:Status:Up prot:Down
> Apr 7 13:58:32 FMS-FreeSwitch sangoma_prid: s1:Status:Up prot:Up
> Apr 7 13:58:37 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
> (current:13:58:37 last:13:58:26 grace:0)
> Apr 7 13:58:43 FMS-FreeSwitch sangoma_prid: Opening
> /var/log/sangoma_pri/dchan_1.log
> Apr 7 13:58:47 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
> (current:13:58:47 last:13:58:37 grace:0)
> Apr 7 13:58:57 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
> (current:13:58:57 last:13:58:47 grace:0)
> Apr 7 13:58:57 FMS-FreeSwitch sangoma_prid: Assuming application is dead
> Apr 7 13:59:07 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
> (current:13:59:07 last:13:58:57 grace:0)
> Apr 7 13:59:17 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
> (current:13:59:17 last:13:59:07 grace:0)
> Apr 7 13:59:27 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
> (current:13:59:27 last:13:59:17 grace:0)
> Apr 7 13:59:27 FMS-FreeSwitch sangoma_prid: Assuming application is dead
> Apr 7 13:59:37 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
> (current:13:59:37 last:13:59:27 grace:0)
> Apr 7 13:59:47 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
> (current:13:59:47 last:13:59:37 grace:0)
> Apr 7 13:59:57 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
> (current:13:59:57 last:13:59:47 grace:0)
> Apr 7 13:59:57 FMS-FreeSwitch sangoma_prid: Assuming application is dead
>
> From freeswitch cli, if I say
> originate openzap/1/a/39114603 at g2 &park(), I got the following in the
> sangoma_mgd.log.
>
> Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: g2:Outgoing call (Smg-ID:2)
> Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: s2:Outgoing call ChanRq:1
> Called-Nb[39114603] Calling-Nb[Unknown] (Smg-ID:2)
> Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: s2c1:Remote
> released-Unallocated (unassigned) number(1)
> Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: s2c0:Call was already
> cleared (TSOFT-ID:4)
> Apr 7 14:13:50 FMS-FreeSwitch sangoma_prid: g2:Call cleared (SMG-ID:2)
>
> By seeing this, I confirmed that span2 is working. Leave out the
> Unallocated number, that's my internal problem.
>
> From the extension, if I dial 0, nothing is printing in sangoma_mgd.log
> But in dhcan2.log I got the No/Circuit or channel available as I
> mentioned earlier.
>
> In freeswitch mod_openzap is loaded properly.
> Any help!!!
>
>
> On Wed, Apr 7, 2010 at 2:17 AM, David Yat Sin <david.yatsin at gmail.com
> <mailto:david.yatsin at gmail.com>> wrote:
>
> Hi Lakshmanan,
> If you do not have anything printing in /var/log/sangoma_mgd.log,
> and you have:
> verbose=4 //(or higher)
>
> in /etc/wanpipe/smg_pri.conf, check that you have these lines in
> /etc/syslog.conf (or /etc/rsyslog.conf):
>
> local2.* /var/log/sangoma_mgd.log
>
> and restart your syslog.
>
>
> my first guess is that you do not have openzap loaded so
> sangoma_prid is rejecting all incoming calls, but I would need
> logs in /var/log/sangoma_mgd.log to confirm.
>
> If openzap is not loaded, you can type:
> load mod_openzap
>
> from the freeswitch CLI to load it.
>
> --
>
> *David Yat Sin, **BEng, **Software Developer**
> *Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham
> ON L3R 9T3 Canada
> t. 1 905 474 1990 x 119 | e. _dyatsin at sangoma.com
> <mailto:dyatsin at sangoma.com>_
>
>
>
> On 4/6/2010 12:24 AM, lakshmanan ganapathy wrote:
>> Hi all,
>> In my office we have a Hard PBX, with some 4 extensions.
>> We also have sangoma A102 card.
>> >From the Hard PBX, if 0 is pressed, it is setup in a way that it
>> will go to outside world.
>> I've connected that line to span2 of the card.
>> The span2 in the A102 card, is configured as PRI_NET.
>>
>> wanrouter status shows connected for the span2.
>>
>> But if I dial from the extension, I got the following in the
>> sangoma_dchan log.
>> 2010-04-03 12:49:49
>> INCOMING [ 00 01 54 50 08 02 01 64 05 04 03 80 90 a3 6c 0c 01 81
>> 34 34 33 39 31 31 34 36 30 30 7d 02 91 81 ]
>> Call Ref:0164
>> Type:Setup (0x5)
>> Bearer Capability:Coding:ITU-T(0) TransferCap:Speech(0)
>> TransferRate:64 Kbit/s(16) L1Prot:G.711 A-Law(3)
>> Calling Party Number:4439114600(l:10) plan:isdn(1)
>> type:unknown(0)scr:user, passed(1) pres:allowed(0)
>> High-Layer Compatibility:Undecodedhex [ 7d 02 91 81 ]
>>
>> 2010-04-03 12:49:49
>> OUTGOING [ 02 01 50 56 08 02 81 64 5a 08 02 82 a2 ]
>> Call Ref:0164
>> Type:Release Compl (0x5a)
>> Cause:coding:ITU-T(0) location:Public network, local user(2)
>> val:No Circuit/Channel Available(34)
>>
>> The call in not reaching freeswitch ( I enabled debug log. But
>> nothing is printing in it ).
>> Can someone suggest how to make this work.
>>
>> Please ask me if you need more information?, since I don't know
>> what to give now.
>>
>>
>> _______________________________________________
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> <mailto:FreeSWITCH-users at lists.freeswitch.org>
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> <mailto:FreeSWITCH-users at lists.freeswitch.org>
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100407/7a74987f/attachment.html
More information about the FreeSWITCH-users
mailing list