[Freeswitch-users] How to setup a span as PRI_NET

Wed Apr 7 01:48:29 PDT 2010

Hi,
I have set verbose=4 in smg_pri.conf.
I started the wanrouter.
Here is the sangoma_mgd.log
Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: ================System
restart=============
Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: = Sangoma PRI Protocol Stack
Daemon       =
Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: = Version:
1.63                           =
Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: = Date: Feb 26
2010                       =
Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: = Wanpipe Release:
wanpipe-3.5.8.6       =
Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: = Revision:Revision:
15607                =
Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid:
===========================================
Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: Number of spans:2
Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: Verbosity set to:4
Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: Log Debug disabled (local:2)
Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: Log Boost disabled (local:6)
Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: TSoft:span:1 pri_cpe euroisdn
dChan:16
Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: TSoft:span:2 pri_net euroisdn
dChan:16
Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: s2:Status:Up prot:Down
Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: BST:(P)
Local:127.0.0.66:53001Remote:
127.0.0.65:53001
Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: BST:(N)
Local:127.0.0.66:53000Remote:
127.0.0.65:53000
Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: BST:Version:103
Apr  7 13:58:27 FMS-FreeSwitch sangoma_prid: s2:Status:Up prot:Up
Apr  7 13:58:31 FMS-FreeSwitch sangoma_prid: s1:Status:Up prot:Down
Apr  7 13:58:32 FMS-FreeSwitch sangoma_prid: s1:Status:Up prot:Up
Apr  7 13:58:37 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
(current:13:58:37 last:13:58:26 grace:0)
Apr  7 13:58:43 FMS-FreeSwitch sangoma_prid: Opening
/var/log/sangoma_pri/dchan_1.log
Apr  7 13:58:47 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
(current:13:58:47 last:13:58:37 grace:0)
Apr  7 13:58:57 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
(current:13:58:57 last:13:58:47 grace:0)
Apr  7 13:58:57 FMS-FreeSwitch sangoma_prid: Assuming application is dead
Apr  7 13:59:07 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
(current:13:59:07 last:13:58:57 grace:0)
Apr  7 13:59:17 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
(current:13:59:17 last:13:59:07 grace:0)
Apr  7 13:59:27 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
(current:13:59:27 last:13:59:17 grace:0)
Apr  7 13:59:27 FMS-FreeSwitch sangoma_prid: Assuming application is dead
Apr  7 13:59:37 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
(current:13:59:37 last:13:59:27 grace:0)
Apr  7 13:59:47 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
(current:13:59:47 last:13:59:37 grace:0)
Apr  7 13:59:57 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
(current:13:59:57 last:13:59:47 grace:0)
Apr  7 13:59:57 FMS-FreeSwitch sangoma_prid: Assuming application is dead

>From freeswitch cli, if I say
originate openzap/1/a/39114603 at g2 &park(), I got the following in the
sangoma_mgd.log.

Apr  7 14:13:50 FMS-FreeSwitch sangoma_prid: g2:Outgoing call (Smg-ID:2)
Apr  7 14:13:50 FMS-FreeSwitch sangoma_prid: s2:Outgoing call ChanRq:1
Called-Nb[39114603] Calling-Nb[Unknown] (Smg-ID:2)
Apr  7 14:13:50 FMS-FreeSwitch sangoma_prid: s2c1:Remote
released-Unallocated (unassigned) number(1)
Apr  7 14:13:50 FMS-FreeSwitch sangoma_prid: s2c0:Call was already cleared
(TSOFT-ID:4)
Apr  7 14:13:50 FMS-FreeSwitch sangoma_prid: g2:Call cleared (SMG-ID:2)

By seeing this, I confirmed that span2 is working. Leave out the Unallocated
number, that's my internal problem.

>From the extension, if I dial 0, nothing is printing in sangoma_mgd.log
But in dhcan2.log I got the No/Circuit or channel available as I mentioned
earlier.

In freeswitch mod_openzap is loaded properly.
Any help!!!

On Wed, Apr 7, 2010 at 2:17 AM, David Yat Sin <david.yatsin at gmail.com>wrote:

>  Hi Lakshmanan,
> If you do not have anything printing in /var/log/sangoma_mgd.log, and you
> have:
> verbose=4           //(or higher)
>
> in /etc/wanpipe/smg_pri.conf, check that you have these lines in
> /etc/syslog.conf (or /etc/rsyslog.conf):
>
> local2.*                /var/log/sangoma_mgd.log
>
> and restart your syslog.
>
>
> my first guess is that you do not have openzap loaded so sangoma_prid is
> rejecting all incoming calls, but I would need logs in
> /var/log/sangoma_mgd.log to confirm.
>
> If openzap is not loaded, you can type:
> load mod_openzap
>
> from the freeswitch CLI to load it.
>
> --
>
> *David Yat Sin, **BEng, **Software Developer**
> *Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R
> 9T3 Canada
> t. 1 905 474 1990 x 119 | e. *dyatsin at sangoma.com*
>
>
>
>
> On 4/6/2010 12:24 AM, lakshmanan ganapathy wrote:
>
> Hi all,
> In my office we have a Hard PBX, with some 4 extensions.
> We also have sangoma A102 card.
> >From the Hard PBX, if 0 is pressed, it is setup in a way that it will go
> to outside world.
> I've connected that line to span2 of the card.
> The span2 in the A102 card, is configured as PRI_NET.
>
> wanrouter status shows connected for the span2.
>
> But if I dial from the extension, I got the following in the sangoma_dchan
> log.
> 2010-04-03 12:49:49
> INCOMING [ 00 01 54 50 08 02 01 64 05 04 03 80 90 a3 6c 0c 01 81 34 34 33
> 39 31 31 34 36 30 30 7d 02 91 81 ]
>   Call Ref:0164
>   Type:Setup (0x5)
>   Bearer Capability:Coding:ITU-T(0) TransferCap:Speech(0) TransferRate:64
> Kbit/s(16) L1Prot:G.711 A-Law(3)
>   Calling Party Number:4439114600(l:10) plan:isdn(1)
> type:unknown(0)scr:user, passed(1) pres:allowed(0)
>   High-Layer Compatibility:Undecodedhex [ 7d 02 91 81 ]
>
> 2010-04-03 12:49:49
> OUTGOING [ 02 01 50 56 08 02 81 64 5a 08 02 82 a2 ]
>   Call Ref:0164
>   Type:Release Compl (0x5a)
>   Cause:coding:ITU-T(0) location:Public network, local user(2) val:No
> Circuit/Channel Available(34)
>
> The call in not reaching freeswitch ( I enabled debug log. But nothing is
> printing in it ).
> Can someone suggest how to make this work.
>
> Please ask me if you need more information?, since I don't know what to
> give now.
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.freeswitch.org
>
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100407/5eb008cc/attachment-0001.html 