[Freeswitch-users] How to setup a span as PRI_NET

Michael Collins msc at freeswitch.org
Thu Apr 8 22:41:08 PDT 2010 

On Thu, Apr 8, 2010 at 9:38 PM, lakshmanan ganapathy
<lakindia89 at gmail.com>wrote:

> Right now I can't provide you the ssh access to the box, since the company
> policy doesn't allow to do so.


You might want to ask the company if they can lift that policy for the sake
of saving everyone's time and energy. I know we have some professionals who
would be willing to sign a reasonable NDA or whatnot to ensure security.
-MC


> But I can explain you more clearly about
> the setup and my need.
>
> The following is the setup.
> >From a Telephone Exchange, a line will be connected to the FS-BOX,  in
> span1.
> We have an internal Hard PBX with some 4 extensions.
> We have connected the Hard PBX to FS-BOX in span2.
>
> I've configured span1 as PRI_CPE and span2 as PRI_NET.
> span1 don't have any problems. Both incoming and outgoing works fine.
> In span2, I was able to make incoming call. It rings the extension.
> But when I make outgoing call from those extension, I got NO CIRCUIT OR
> CHANNEL AVAILABLE.
>
> Right now in sangoma_mgd log, I got the following when I make outgoing
> call.
>
> Apr  8 10:20:21 FMS-FreeSwitch sangoma_prid: Opening
> /var/log/sangoma_pri/dchan_2.log
> Apr  8 10:20:21 FMS-FreeSwitch sangoma_prid: Rx Tsoft [s2c0 7:StatusIn
> 3:134716232 id:65535]
> Apr  8 10:20:21 FMS-FreeSwitch sangoma_prid: Rx Tsoft [s2c0 7:StatusIn
> 4:134716308 id:65535]
>
> Moreover I also have an Asterisk Box with Digim card. It works fine there.
> When i dial from extension, it reaches asterisk and it responds with
> SETUP_ACK.
>
> please guide me.
>
>
> On Wed, Apr 7, 2010 at 10:44 PM, David Yat Sin <david.yatsin at gmail.com>
> wrote:
> >
> > Can you provide me with SSH access to that box and a phone number I can
> use to trigger an incoming call on span 2 to that box?
> >
> > You can email me at: dyatsin at sangoma.com
> >
> > David
> >
> > On 4/7/2010 4:48 AM, lakshmanan ganapathy wrote:
> >
> > Hi,
> > I have set verbose=4 in smg_pri.conf.
> > I started the wanrouter.
> > Here is the sangoma_mgd.log
> > Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: ================System
> restart=============
> > Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: = Sangoma PRI Protocol Stack
> Daemon       =
> > Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: = Version: 1.63
>               =
> > Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: = Date: Feb 26 2010
>               =
> > Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: = Wanpipe Release:
> wanpipe-3.5.8.6       =
> > Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: = Revision:Revision: 15607
>              =
> > Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid:
> ===========================================
> > Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: Number of spans:2
> > Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: Verbosity set to:4
> > Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: Log Debug disabled (local:2)
> > Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: Log Boost disabled (local:6)
> > Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: TSoft:span:1 pri_cpe
> euroisdn dChan:16
> > Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: TSoft:span:2 pri_net
> euroisdn dChan:16
> > Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: s2:Status:Up prot:Down
> > Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: BST:(P) Local:
> 127.0.0.66:53001 Remote:127.0.0.65:53001
> > Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: BST:(N) Local:
> 127.0.0.66:53000 Remote:127.0.0.65:53000
> > Apr  7 13:58:25 FMS-FreeSwitch sangoma_prid: BST:Version:103
> > Apr  7 13:58:27 FMS-FreeSwitch sangoma_prid: s2:Status:Up prot:Up
> > Apr  7 13:58:31 FMS-FreeSwitch sangoma_prid: s1:Status:Up prot:Down
> > Apr  7 13:58:32 FMS-FreeSwitch sangoma_prid: s1:Status:Up prot:Up
> > Apr  7 13:58:37 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
> (current:13:58:37 last:13:58:26 grace:0)
> > Apr  7 13:58:43 FMS-FreeSwitch sangoma_prid: Opening
> /var/log/sangoma_pri/dchan_1.log
> > Apr  7 13:58:47 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
> (current:13:58:47 last:13:58:37 grace:0)
> > Apr  7 13:58:57 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
> (current:13:58:57 last:13:58:47 grace:0)
> > Apr  7 13:58:57 FMS-FreeSwitch sangoma_prid: Assuming application is dead
> > Apr  7 13:59:07 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
> (current:13:59:07 last:13:58:57 grace:0)
> > Apr  7 13:59:17 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
> (current:13:59:17 last:13:59:07 grace:0)
> > Apr  7 13:59:27 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
> (current:13:59:27 last:13:59:17 grace:0)
> > Apr  7 13:59:27 FMS-FreeSwitch sangoma_prid: Assuming application is dead
> > Apr  7 13:59:37 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
> (current:13:59:37 last:13:59:27 grace:0)
> > Apr  7 13:59:47 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
> (current:13:59:47 last:13:59:37 grace:0)
> > Apr  7 13:59:57 FMS-FreeSwitch sangoma_prid: HeartBeat timeout
> (current:13:59:57 last:13:59:47 grace:0)
> > Apr  7 13:59:57 FMS-FreeSwitch sangoma_prid: Assuming application is dead
> >
> > >From freeswitch cli, if I say
> > originate openzap/1/a/39114603 at g2 &park(), I got the following in the
> sangoma_mgd.log.
> >
> > Apr  7 14:13:50 FMS-FreeSwitch sangoma_prid: g2:Outgoing call (Smg-ID:2)
> > Apr  7 14:13:50 FMS-FreeSwitch sangoma_prid: s2:Outgoing call ChanRq:1
> Called-Nb[39114603] Calling-Nb[Unknown] (Smg-ID:2)
> > Apr  7 14:13:50 FMS-FreeSwitch sangoma_prid: s2c1:Remote
> released-Unallocated (unassigned) number(1)
> > Apr  7 14:13:50 FMS-FreeSwitch sangoma_prid: s2c0:Call was already
> cleared (TSOFT-ID:4)
> > Apr  7 14:13:50 FMS-FreeSwitch sangoma_prid: g2:Call cleared (SMG-ID:2)
> >
> > By seeing this, I confirmed that span2 is working. Leave out the
> Unallocated number, that's my internal problem.
> >
> > >>From the extension, if I dial 0, nothing is printing in sangoma_mgd.log
> > But in dhcan2.log I got the No/Circuit or channel available as I
> mentioned earlier.
> >
> > In freeswitch mod_openzap is loaded properly.
> > Any help!!!
> >
> >
> > On Wed, Apr 7, 2010 at 2:17 AM, David Yat Sin <david.yatsin at gmail.com>
> wrote:
> >>
> >> Hi Lakshmanan,
> >> If you do not have anything printing in /var/log/sangoma_mgd.log, and
> you have:
> >> verbose=4           //(or higher)
> >>
> >> in /etc/wanpipe/smg_pri.conf, check that you have these lines in
> /etc/syslog.conf (or /etc/rsyslog.conf):
> >>
> >> local2.*                /var/log/sangoma_mgd.log
> >>
> >> and restart your syslog.
> >>
> >>
> >> my first guess is that you do not have openzap loaded so sangoma_prid is
> rejecting all incoming calls, but I would need logs in
> /var/log/sangoma_mgd.log to confirm.
> >>
> >> If openzap is not loaded, you can type:
> >> load mod_openzap
> >>
> >> from the freeswitch CLI to load it.
> >>
> >> --
> >>
> >> David Yat Sin, BEng, Software Developer
> >> Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R
> 9T3 Canada
> >> t. 1 905 474 1990 x 119 | e. dyatsin at sangoma.com
> >>
> >>
> >>
> >> On 4/6/2010 12:24 AM, lakshmanan ganapathy wrote:
> >>
> >> Hi all,
> >> In my office we have a Hard PBX, with some 4 extensions.
> >> We also have sangoma A102 card.
> >> >From the Hard PBX, if 0 is pressed, it is setup in a way that it will
> go to outside world.
> >> I've connected that line to span2 of the card.
> >> The span2 in the A102 card, is configured as PRI_NET.
> >>
> >> wanrouter status shows connected for the span2.
> >>
> >> But if I dial from the extension, I got the following in the
> sangoma_dchan log.
> >> 2010-04-03 12:49:49
> >> INCOMING [ 00 01 54 50 08 02 01 64 05 04 03 80 90 a3 6c 0c 01 81 34 34
> 33 39 31 31 34 36 30 30 7d 02 91 81 ]
> >>   Call Ref:0164
> >>   Type:Setup (0x5)
> >>   Bearer Capability:Coding:ITU-T(0) TransferCap:Speech(0)
> TransferRate:64 Kbit/s(16) L1Prot:G.711 A-Law(3)
> >>   Calling Party Number:4439114600(l:10) plan:isdn(1)
> type:unknown(0)scr:user, passed(1) pres:allowed(0)
> >>   High-Layer Compatibility:Undecodedhex [ 7d 02 91 81 ]
> >>
> >> 2010-04-03 12:49:49
> >> OUTGOING [ 02 01 50 56 08 02 81 64 5a 08 02 82 a2 ]
> >>   Call Ref:0164
> >>   Type:Release Compl (0x5a)
> >>   Cause:coding:ITU-T(0) location:Public network, local user(2) val:No
> Circuit/Channel Available(34)
> >>
> >> The call in not reaching freeswitch ( I enabled debug log. But nothing
> is printing in it ).
> >> Can someone suggest how to make this work.
> >>
> >> Please ask me if you need more information?, since I don't know what to
> give now.
>
> >>
> >>
> >> _______________________________________________
> >> FreeSWITCH-users mailing list
> >> FreeSWITCH-users at lists.freeswitch.org
> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> >> UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-users
> >> http://www.freeswitch.org
> >>
> >>
> >> _______________________________________________
> >> FreeSWITCH-users mailing list
> >> FreeSWITCH-users at lists.freeswitch.org
> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> >> UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-users
> >> http://www.freeswitch.org
> >>
> >
> >
> > _______________________________________________
> > FreeSWITCH-users mailing list
> > FreeSWITCH-users at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> > http://www.freeswitch.org
> >
> >
> > _______________________________________________
> > FreeSWITCH-users mailing list
> > FreeSWITCH-users at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> > http://www.freeswitch.org
> >
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100408/af00cb47/attachment-0001.html

More information about the FreeSWITCH-users mailing list