[Freeswitch-dev] FreeSwitch Builds

Fri Oct 24 23:47:41 EDT 2008

Thanks.
I was recompiling often and was hoping to apply some power and save time.
I should have been more detailed as my moving to a single processor system
was not just for the build but to evaluate the performance on a system
similar to the ones it will be deployed on.

On Fri, Oct 24, 2008 at 9:13 PM, Michael Giagnocavo <mgg at giagnocavo.net>wrote:

>  If it's just a multi-proc issue (is there a bug link that describes it?),
> then just set the CPU affinity for the FS process to a single processor. No
> need to switch hardware.
>
>
>
> *From:* freeswitch-dev-bounces at lists.freeswitch.org [mailto:
> freeswitch-dev-bounces at lists.freeswitch.org] *On Behalf Of *Robert Clayton
> *Sent:* Friday, October 24, 2008 3:45 PM
> *To:* freeswitch-dev at lists.freeswitch.org
> *Subject:* Re: [Freeswitch-dev] FreeSwitch Builds
>
>
>
> Mr. Minessale,
>
> If my multiprocessor problem is a "minor issue" then I see no need to pull
> anyone off more pressing tasks. I will find a single processor system to
> build on.
> And yes I am impressed that it builds on Windows. As far as sarcasm I
> think, as I stated, I can safely assume, due to your creation, that you are
> a better programmer than myself. Even though I would aspire to similar
> mastery, I continue to hold character more important than knowledge. Should
> I ever get a solid hold on FreeSwitch, God willing, I would be willing to
> attempt to assist you in lowering your incredible 16 hour workload. As far
> as my "nice box" due to medical reasons I have been unemployed for five
> years and other than my family it is one of the few nice things I have.
>
> Bob
>
> On Fri, Oct 24, 2008 at 2:55 PM, Anthony Minessale <
> anthony.minessale at gmail.com> wrote:
>
> Did you take his advice and post the log of the build errors to Jira?
>
> *Hint*
> Mr Minessale gets extra angry when people still put sarcasm in their
> apology or explanation of how they were not being rude.
>
> However you want to look at it, you are complaining about a minor issue
> with free software that I spend
> up to 16 hours a day writing for you.  Is a more polite choice of wording
> that much to ask?
> Aren't you impressed it even builds on windows at all?  We don't have a box
> as nice as you that runs windows to expose the problem you mention so we can
> only rely on your input.
>
> 4 people now have explained in detail the steps you can take.
> Take it or leave it but, please, stop with the sarcasm.
>
>
>
>  On Fri, Oct 24, 2008 at 12:47 PM, Robert Clayton <rjcajax at gmail.com>
> wrote:
>
> Thanks Michael.
> Judging from Mr. Minessale's remark I appeared insulting or at the least
> too
> demanding. No insult was intended. I was happy running two sequential
> builds
> to receive a result. But my best laid plan was providing to many unknowns.
> I know there are an endless number of build configurations maybe a posted
> weekly compiled build (VS2008?) would level the playing field. I will try
> to
> find a single processor machine and compare the results.
>
> P.S. Hot off the compiler. I just pulled rev 10141 on my quad using VS2008
> the first run produced 91 errors and 155 warnings. The second run produced
> 0 errors and 0 warnings with:
>
> Build: 69 succeeded, 0 failed, 50 up-to-date, 6 skipped,
>
> About an hour earlier (and a previous build) I could not get past
> compiler errors
> in libaprutil, FreeSwitchCoreLib and mod_event_socket.
>
> But assuming sequential compiles create a valid result you responce has
> laid
> it's hands on the problem and it is healed.
>
> Bob
>
>
> On Fri, Oct 24, 2008 at 12:39 PM, Michael Jerris <mike at jerris.com> wrote:
> > I just built current trunk (rev 10140) with no problems.  As we develop
> on
> > many different platforms and compilers are not consistent in the rules
> they
> > enforce there are often specific revisions that do not compile on one
> > platform or another.  We are constantly building on all the different
> > platforms and its rare to have a total build failure on any one platform
> for
> > more than a day.  I am not aware of any race condition in the build.  Is
> > there a bug for this reported on the bug tracker at
> > http://jira.freeswitch.org ?
> > Mike
> >
> >
> > On Oct 24, 2008, at 12:30 PM, Anthony Minessale wrote:
> >
> > Looks like you qualify for our "double-your-money-back" guarantee.
> >
> > Don't know about anyone else but your email sounds pretty ungrateful.
>  You
> > may want to read it again before you press send next time.
> >
> > Since you seem pretty knowledgeable about the problem maybe you could
> work
> > on fixing the issue  and contribute the fix back.
> >
> >
> >
> > On Fri, Oct 24, 2008 at 10:58 AM, Robert Clayton <rjcajax at gmail.com>
> wrote:
> >>
> >> All,
> >>
> >> The race conditions building Windows FreeSwitch on a multiprocessor or
> >> at least quad core was never fixed.
> >> But I had found that running the same build sequentially often
> >> appeared to work. Alas I have been grabbing
> >> the build multiple times daily for a month now and have never gotten
> >> VS2008 to build with out error. Yet since
> >> one never knows which revision last compiled properly for the Windows
> >> developers the trial and error method
> >> really proves nothing and I guess succeeded in the past only by luck.
> >> My last build which appeared to work
> >> was revision 9641 on 9/19/08.
> >>
> >> Is there anyway that the revisions of the sugcessful builds be noted
> >> or even better the successful
> >> windows builds be made available?
> >>
> >> Bob
> >>
> >> _______________________________________________
> >> Freeswitch-dev mailing list
> >> Freeswitch-dev at lists.freeswitch.org
> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
> >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev
> >> http://www.freeswitch.org
> >
> >
> >
> > --
> > Anthony Minessale II
> >
> > FreeSWITCH http://www.freeswitch.org/
> > ClueCon http://www.cluecon.com/
> >
> > AIM: anthm
> > MSN:anthony_minessale at hotmail.com <MSN%3Aanthony_minessale at hotmail.com>
> > GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com<PAYPAL%3Aanthony.minessale at gmail.com>
> > IRC: irc.freenode.net #freeswitch
> >
> > FreeSWITCH Developer Conference
> > sip:888 at conference.freeswitch.org <sip%3A888 at conference.freeswitch.org>
> > iax:guest at conference.freeswitch.org/888
> > googletalk:conf+888 at conference.freeswitch.org<googletalk%3Aconf%2B888 at conference.freeswitch.org>
> > pstn:213-799-1400
> > _______________________________________________
> > Freeswitch-dev mailing list
> > Freeswitch-dev at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev
> > http://www.freeswitch.org
> >
> >
> > _______________________________________________
> > Freeswitch-dev mailing list
> > Freeswitch-dev at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev
> > http://www.freeswitch.org
> >
> >
>
> _______________________________________________
> Freeswitch-dev mailing list
> Freeswitch-dev at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev
> http://www.freeswitch.org
>
>
>
>
> --
> Anthony Minessale II
>
> FreeSWITCH http://www.freeswitch.org/
> ClueCon http://www.cluecon.com/
>
> AIM: anthm
> MSN:anthony_minessale at hotmail.com <MSN%3Aanthony_minessale at hotmail.com>
> GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com<PAYPAL%3Aanthony.minessale at gmail.com>
> IRC: irc.freenode.net #freeswitch
>
> FreeSWITCH Developer Conference
> sip:888 at conference.freeswitch.org <sip%3A888 at conference.freeswitch.org>
> iax:guest at conference.freeswitch.org/888
> googletalk:conf+888 at conference.freeswitch.org<googletalk%3Aconf%2B888 at conference.freeswitch.org>
> pstn:213-799-1400
>
>
> _______________________________________________
> Freeswitch-dev mailing list
> Freeswitch-dev at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev
> http://www.freeswitch.org
>
>
>
> _______________________________________________
> Freeswitch-dev mailing list
> Freeswitch-dev at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-dev/attachments/20081024/d014f176/attachment-0001.html 