[Freeswitch-users] Voice Conference Voice

[Ahmed habiba]

Hello,

Any one can help?

"I look into code and I see something not sure if I’m right or wrong, when the conference loop is not able to read from input it sleep for 100 MS”?

Thanks,
Ahmed Habiba.

> 
> 
> From: Ahmed habiba <ahabiba at gmail.com>
> Subject: Re: [Freeswitch-users] Voice Conference Voice Choppy(Ahabiba)
> Date: 2 April 2020 at 5:04:27 PM GMT+3
> To: freeswitch-users at lists.freeswitch.org
> 
> 
> Hi,
> 
> Here is the Jitter calculated from my machine against the server using perf - the server is baremetal 
> 
> [ ID] Interval           Transfer     Bitrate         Jitter    Lost/Total Datagrams
> [  5]   0.00-20.00  sec  2.38 MBytes  1.00 Mbits/sec  0.000 ms  0/1786 (0%)  sender
> [  5]   0.00-20.00  sec  2.38 MBytes  1000 Kbits/sec  0.321 ms  1/1786 (0.056%)  receiver
> 
> Perf result from server side:
> [ ID] Interval           Transfer     Bandwidth       Jitter    Lost/Total Datagrams
> [  5]   0.00-20.09  sec  2.38 MBytes   996 Kbits/sec  0.321 ms  1/1786 (0.056%)  
> 
> 
> Client iperf command:
>  iperf3 -u -c 176.31.123.52 -b 1M -i 1 -t 20 
> 
> 
> Thanks,
> Ahmed Habiba.
> 
>> 
>>   1. Re: Voice Conference Voice Choppy (Giovanni Maruzzelli)
>> 
>> From: Giovanni Maruzzelli <gmaruzz at gmail.com <mailto:gmaruzz at gmail.com>>
>> Subject: Re: [Freeswitch-users] Voice Conference Voice Choppy
>> Date: 2 April 2020 at 1:23:29 PM GMT+3
>> To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org <mailto:freeswitch-users at lists.freeswitch.org>>
>> Reply-To: gmaruzz at opentelecom.it <mailto:gmaruzz at opentelecom.it>
>> 
>> 
>> If you are running in baremetal (eg, no VMs), then check packet loss/jitter...
>> 
>> 
>> 
>> On Thu, Apr 2, 2020 at 11:53 AM Ahmed habiba <ahabiba at gmail.com <mailto:ahabiba at gmail.com>> wrote:
>> Hello,
>> 
>> I’m trying to use FreeSWITCH voice conference, however hear some cuts is the voice from time to time some minor distortions, I look into code and I see something not sure if I’m right or wrong, when the conference loop is not able to read from input it sleep for 100 MS? Kindly advice how to overcome this issue.
>> 
>> To Note, I’m using server with "Xeon E3-1245v2 (4c/8th) - 32GB” and I’m using it for 3 to 4 users only, nothing else ring on this machine.
>> 
>> Thanks,
>> Ahmed Habiba.
>> _________________________________________________________________________
>> 
>> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com <https://signalwire.com/>
>> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
>> Build your next product on our scalable cloud platform.
>> 
>> Join our online community to chat in real time https://signalwire.community <https://signalwire.community/>
>> 
>> Professional FreeSWITCH Services
>> sales at freeswitch.com <mailto:sales at freeswitch.com>
>> https://freeswitch.com <https://freeswitch.com/>
>> 
>> Official FreeSWITCH Sites
>> https://freeswitch.com/oss <https://freeswitch.com/oss>
>> https://freeswitch.org/confluence <https://freeswitch.org/confluence>
>> https://cluecon.com <https://cluecon.com/>
>> 
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org <mailto:FreeSWITCH-users at lists.freeswitch.org>
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users>
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users>
>> https://freeswitch.com <https://freeswitch.com/>
>> 
>> -- 
>> Sincerely,
>> 
>> Giovanni Maruzzelli
>> OpenTelecom.IT
>> cell: +39 347 266 56 18
>> 
>> 
> 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20200403/348ddcc3/attachment.html>