[Freeswitch-users] Multi Tenant (Company), User unable to register ( SIP/2.0 403 Forbidden)

Mon Sep 22 05:22:06 MSD 2014

Another note, you need to setup the DNS. Use your own domain, not the
company-a.org.

Lloyd

On Sun, Sep 21, 2014 at 9:10 PM, Vik Killa <vipkilla at gmail.com> wrote:

> *Ahmed,*
>
> *You are probably configuring your sip client wrong.*
> *Make sure you set the outbound proxy of your SIP client to your FS and
> the SIP Client's domain to **company-a.org <http://company-a.org>*
>
>
> *like:outbound-proxy: 192.168.0.11*
> *domain: **company-a.org <http://company-a.org>*
> *user: 1000 (or **1000@**company-a.org <http://company-a.org>) *
> *password: 1234*
>
> *it all depends on your SIP client, what client are you using?*
> *Also, i would leave the group name as 'default' like below:*
>
> *2-company-a.org.xml:*
> root@:/usr/local/freeswitch/conf/directory# cat company-a.org.xml
> <include>
>   <!--the domain or ip (the right hand side of the @ in the addr-->
>   <domain name="*company-a.org <http://company-a.org/>*">
>     <params>
>       <param name="dial-string" value="{presence_id=${dialed_user}@
> ${dialed_domain}}${sofia_contact(${dialed_user}@${dialed_domain})}"/>
>     </params>
>
>     <variables>
>       <variable name="record_stereo" value="true"/>
>       <variable name="default_gateway" value="$${default_provider}"/>
>       <variable name="default_areacode" value="$${default_areacode}"/>
>       <variable name="transfer_fallback_extension" value="operator"/>
>       <variable name="user_context" value="company-a.org"/>
>     </variables>
>
>     <groups>
> <!--      <group name="*company-a.org <http://company-a.org/>*"> -->
>       <group name="*d <http://company-a.org/>efault*">
>         <users>
>           <X-PRE-PROCESS cmd="include" data="*company-a.org/*.xml
> <http://company-a.org/*.xml>*"/>
>         </users>
>       </group>
>
>     </groups>
>
>   </domain>
> </include>
>
>
> Thanks
> /V
>
> On Sun, Sep 21, 2014 at 5:24 PM, Ahmed Habiba <ahabiba at gmail.com> wrote:
>
>> *I’ve go **through the book however I was not able to identify the
>> issue, my configuration is as below:*
>>
>> *1-Directory folder as below:*
>>
>> root@:/usr/local/freeswitch/conf/directory# ls -ltr
>> total 16
>> -rw-r--r-- 1 root root 2925 Aug 27 12:17 default.xml
>> drwxr-xr-x 2 root root 4096 Sep 19 20:47 *default*
>> -rw-r--r-- 1 root root  835 Sep 20 16:27 company-a.org.xml
>> drwxr-xr-x 2 root root 4096 Sep 20 16:50 *company-a.org
>> <http://company-a.org>*
>>
>> *2-company-a.org.xml:*
>> root@:/usr/local/freeswitch/conf/directory# cat company-a.org.xml
>> <include>
>>   <!--the domain or ip (the right hand side of the @ in the addr-->
>>   <domain name="*company-a.org <http://company-a.org>*">
>>     <params>
>>       <param name="dial-string" value="{presence_id=${dialed_user}@
>> ${dialed_domain}}${sofia_contact(${dialed_user}@${dialed_domain})}"/>
>>     </params>
>>
>>     <variables>
>>       <variable name="record_stereo" value="true"/>
>>       <variable name="default_gateway" value="$${default_provider}"/>
>>       <variable name="default_areacode" value="$${default_areacode}"/>
>>       <variable name="transfer_fallback_extension" value="operator"/>
>>       <variable name="user_context" value="company-a.org"/>
>>     </variables>
>>
>>     <groups>
>>       <group name="*company-a.org <http://company-a.org>*">
>>         <users>
>>           <X-PRE-PROCESS cmd="include" data="*company-a.org/*.xml
>> <http://company-a.org/*.xml>*"/>
>>         </users>
>>       </group>
>>
>>     </groups>
>>
>>   </domain>
>> </include>
>>
>> 3*-company-a.org.xml:*
>> root@:/usr/local/freeswitch/conf/directory# ls -l company-a.org
>> total 100
>> -rw-r--r-- 1 root root  851 Sep 20 16:50 1000.xml
>> -rw-r--r-- 1 root root  751 Aug 27 12:17 1001.xml
>> -rw-r--r-- 1 root root  751 Aug 27 12:17 1002.xml
>> -rw-r--r-- 1 root root  751 Aug 27 12:17 1003.xml
>> -rw-r--r-- 1 root root  751 Aug 27 12:17 1004.xml
>> -rw-r--r-- 1 root root  751 Aug 27 12:17 1005.xml
>> -rw-r--r-- 1 root root  751 Aug 27 12:17 1006.xml
>>
>> 4- in internal.xml I commented the below lines:
>> root at openerp:/usr/local/freeswitch/conf/sip_profiles# vi internal.xml
>>
>>     <!--all inbound reg will look in this domain for the users -->
>>     <!--<param name="force-register-domain" value="$${domain}"/>-->
>>     <!--force the domain in subscriptions to this value -->
>>     <!--<param name="force-subscription-domain" value="$${domain}"/>-->
>>     <!--all inbound reg will stored in the db using this domain -->
>>     <!--<param name="force-register-db-domain" value="$${domain}"/>-->
>>
>> 5-In zoiper client I use 1000@*company-a.org <http://company-a.org> as a
>> user name instead of 1000.*
>>
>> *and finally I still getting *SIP/2.0 403 Forbidden
>>
>> *Your help is always appreciated.*
>>
>> *Thanks in advance,*
>>
>> *Ahmed Habiba.*
>>
>> *From: *Stanislav Sinyagin <ssinyagin at gmail.com>
>> *Subject: **Re: [Freeswitch-users] Multi Tenant (Company), User unable
>> to register ( SIP/2.0 403 Forbidden)*
>> *Date: *September 21, 2014 at 11:37:10 PM GMT+3
>> *To: *FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
>> *Reply-To: *FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
>>
>>
>> Have you read the freeswitch book? It gives answers to most questions.
>> Also you haven't given a clue how your configuration looks like, so what
>> kind of help do you expect?
>>
>> Of course you can easily find someone who can set up your server for
>> money... Although the book is usually enough.
>> On Sep 21, 2014 9:36 PM, "Ahmed habiba" <ahabiba at gmail.com> wrote:
>>
>>> What would be the extra value of FusionPBX if I'm not able to use the
>>> back-end manual configuration.
>>>
>>> Your kind help will be appreciated.
>>>
>>> Thanks,
>>>
>>> Ahmed Habiba.
>>> -------------------------------------
>>> From: Luis Daniel Lucio Quiroz <luis.daniel.lucio at gmail.com>
>>> To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
>>> Cc:
>>> Date: Sat, 20 Sep 2014 18:33:38 -0400
>>> Subject: Re: [Freeswitch-users] Multi Tenant (Company), User unable to
>>> register ( SIP/2.0 403 Forbidden)
>>> Have you consider to use FusionPBX?
>>>
>>> On Sep 20, 2014 5:36 PM, "Ahmed Habiba" <ahabiba at gmail.com> wrote:
>>> Hello Everybody,
>>>
>>> I’ve been trying to configure FreeSWITCH in multi tenant mode however I
>>> always get “403 Forbidden” during user registration, I use the same
>>> tutorial on wiki as is with name and paramters "
>>> https://wiki.freeswitch.org/wiki/Multiple_Companies” with consideration
>>> that my network scenario is as below:
>>>
>>> [FreeSWITCH(real IP)]<———>[Internet]<———>[NAT]<———>[Client]
>>>
>>> Your kind help will be appreciated.
>>>
>>> Thanks and Best Regards,
>>>
>>> Ahmed Habiba.
>>>
>>
>> _________________________________________________________________________
>> Professional FreeSWITCH Consulting Services:
>> consulting at freeswitch.org
>> http://www.freeswitchsolutions.com
>>
>> Official FreeSWITCH Sites
>> http://www.freeswitch.org
>> http://confluence.freeswitch.org
>> http://www.cluecon.com
>>
>> 
>> 
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> 
> 
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20140921/f12d0f24/attachment-0001.html 