[Freeswitch-users] Multi Tenant (Company), User unable to register ( SIP/2.0 403 Forbidden)

Vik Killa vipkilla at gmail.com
Mon Sep 22 05:10:18 MSD 2014 

*Ahmed,*

*You are probably configuring your sip client wrong.*
*Make sure you set the outbound proxy of your SIP client to your FS and the
SIP Client's domain to **company-a.org <http://company-a.org>*


*like:outbound-proxy: 192.168.0.11*
*domain: **company-a.org <http://company-a.org>*
*user: 1000 (or **1000@**company-a.org <http://company-a.org>) *
*password: 1234*

*it all depends on your SIP client, what client are you using?*
*Also, i would leave the group name as 'default' like below:*

*2-company-a.org.xml:*
root@:/usr/local/freeswitch/conf/directory# cat company-a.org.xml
<include>
  <!--the domain or ip (the right hand side of the @ in the addr-->
  <domain name="*company-a.org <http://company-a.org/>*">
    <params>
      <param name="dial-string" value="{presence_id=${dialed_user}@
${dialed_domain}}${sofia_contact(${dialed_user}@${dialed_domain})}"/>
    </params>

    <variables>
      <variable name="record_stereo" value="true"/>
      <variable name="default_gateway" value="$${default_provider}"/>
      <variable name="default_areacode" value="$${default_areacode}"/>
      <variable name="transfer_fallback_extension" value="operator"/>
      <variable name="user_context" value="company-a.org"/>
    </variables>

    <groups>
<!--      <group name="*company-a.org <http://company-a.org/>*"> -->
      <group name="*d <http://company-a.org/>efault*">
        <users>
          <X-PRE-PROCESS cmd="include" data="*company-a.org/*.xml
<http://company-a.org/*.xml>*"/>
        </users>
      </group>

    </groups>

  </domain>
</include>


Thanks
/V

On Sun, Sep 21, 2014 at 5:24 PM, Ahmed Habiba <ahabiba at gmail.com> wrote:

> *I’ve go **through the book however I was not able to identify the issue,
> my configuration is as below:*
>
> *1-Directory folder as below:*
>
> root@:/usr/local/freeswitch/conf/directory# ls -ltr
> total 16
> -rw-r--r-- 1 root root 2925 Aug 27 12:17 default.xml
> drwxr-xr-x 2 root root 4096 Sep 19 20:47 *default*
> -rw-r--r-- 1 root root  835 Sep 20 16:27 company-a.org.xml
> drwxr-xr-x 2 root root 4096 Sep 20 16:50 *company-a.org
> <http://company-a.org>*
>
> *2-company-a.org.xml:*
> root@:/usr/local/freeswitch/conf/directory# cat company-a.org.xml
> <include>
>   <!--the domain or ip (the right hand side of the @ in the addr-->
>   <domain name="*company-a.org <http://company-a.org>*">
>     <params>
>       <param name="dial-string" value="{presence_id=${dialed_user}@
> ${dialed_domain}}${sofia_contact(${dialed_user}@${dialed_domain})}"/>
>     </params>
>
>     <variables>
>       <variable name="record_stereo" value="true"/>
>       <variable name="default_gateway" value="$${default_provider}"/>
>       <variable name="default_areacode" value="$${default_areacode}"/>
>       <variable name="transfer_fallback_extension" value="operator"/>
>       <variable name="user_context" value="company-a.org"/>
>     </variables>
>
>     <groups>
>       <group name="*company-a.org <http://company-a.org>*">
>         <users>
>           <X-PRE-PROCESS cmd="include" data="*company-a.org/*.xml
> <http://company-a.org/*.xml>*"/>
>         </users>
>       </group>
>
>     </groups>
>
>   </domain>
> </include>
>
> 3*-company-a.org.xml:*
> root@:/usr/local/freeswitch/conf/directory# ls -l company-a.org
> total 100
> -rw-r--r-- 1 root root  851 Sep 20 16:50 1000.xml
> -rw-r--r-- 1 root root  751 Aug 27 12:17 1001.xml
> -rw-r--r-- 1 root root  751 Aug 27 12:17 1002.xml
> -rw-r--r-- 1 root root  751 Aug 27 12:17 1003.xml
> -rw-r--r-- 1 root root  751 Aug 27 12:17 1004.xml
> -rw-r--r-- 1 root root  751 Aug 27 12:17 1005.xml
> -rw-r--r-- 1 root root  751 Aug 27 12:17 1006.xml
>
> 4- in internal.xml I commented the below lines:
> root at openerp:/usr/local/freeswitch/conf/sip_profiles# vi internal.xml
>
>     <!--all inbound reg will look in this domain for the users -->
>     <!--<param name="force-register-domain" value="$${domain}"/>-->
>     <!--force the domain in subscriptions to this value -->
>     <!--<param name="force-subscription-domain" value="$${domain}"/>-->
>     <!--all inbound reg will stored in the db using this domain -->
>     <!--<param name="force-register-db-domain" value="$${domain}"/>-->
>
> 5-In zoiper client I use 1000@*company-a.org <http://company-a.org> as a
> user name instead of 1000.*
>
> *and finally I still getting *SIP/2.0 403 Forbidden
>
> *Your help is always appreciated.*
>
> *Thanks in advance,*
>
> *Ahmed Habiba.*
>
> *From: *Stanislav Sinyagin <ssinyagin at gmail.com>
> *Subject: **Re: [Freeswitch-users] Multi Tenant (Company), User unable to
> register ( SIP/2.0 403 Forbidden)*
> *Date: *September 21, 2014 at 11:37:10 PM GMT+3
> *To: *FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> *Reply-To: *FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
>
>
> Have you read the freeswitch book? It gives answers to most questions.
> Also you haven't given a clue how your configuration looks like, so what
> kind of help do you expect?
>
> Of course you can easily find someone who can set up your server for
> money... Although the book is usually enough.
> On Sep 21, 2014 9:36 PM, "Ahmed habiba" <ahabiba at gmail.com> wrote:
>
>> What would be the extra value of FusionPBX if I'm not able to use the
>> back-end manual configuration.
>>
>> Your kind help will be appreciated.
>>
>> Thanks,
>>
>> Ahmed Habiba.
>> -------------------------------------
>> From: Luis Daniel Lucio Quiroz <luis.daniel.lucio at gmail.com>
>> To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
>> Cc:
>> Date: Sat, 20 Sep 2014 18:33:38 -0400
>> Subject: Re: [Freeswitch-users] Multi Tenant (Company), User unable to
>> register ( SIP/2.0 403 Forbidden)
>> Have you consider to use FusionPBX?
>>
>> On Sep 20, 2014 5:36 PM, "Ahmed Habiba" <ahabiba at gmail.com> wrote:
>> Hello Everybody,
>>
>> I’ve been trying to configure FreeSWITCH in multi tenant mode however I
>> always get “403 Forbidden” during user registration, I use the same
>> tutorial on wiki as is with name and paramters "
>> https://wiki.freeswitch.org/wiki/Multiple_Companies” with consideration
>> that my network scenario is as below:
>>
>> [FreeSWITCH(real IP)]<———>[Internet]<———>[NAT]<———>[Client]
>>
>> Your kind help will be appreciated.
>>
>> Thanks and Best Regards,
>>
>> Ahmed Habiba.
>>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> 
> 
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20140921/def7ef2e/attachment.html

Join us at ClueCon 2016 Aug 8-12, 2016
More information about the FreeSWITCH-users mailing list