[Freeswitch-users] How to see if Freeswitch is transcodin

Wed Oct 22 14:55:58 MSD 2014

Nothing at the moment, but it might be scriptable.

On 22 October 2014 11:00, kthofer <karl-theo_hofer at inteli-sim.com> wrote:

>  Hi Steven, Florent
> ok but I have some 100 channels on the box simultaneously
> that will be very difficult to make out the uuids needed as well the
> printout are in one line is there a possibility to show the result in a
> table or something more reader friendly?
>
>
> With best regards
>
> Karl Theo Hofer
>
>
> Florent Krieg skrev 2014-10-22 11:34:
>
> Steven's right.
> I thought about a very basic use case when writing my message.
>
> Florent
>
> 2014-10-22 10:59 GMT+02:00 Steven Ayre <steveayre at gmail.com> <steveayre at gmail.com>:
>
>
>  'if it's the same then there's no transcoding'
>
> Also depending on the applications in use - playback, conference,
> eavesdrop etc will also require transcoding.
>
>
>
> On 21 October 2014 17:52, Florent Krieg <flokrrr at gmail.com> <flokrrr at gmail.com> wrote:
>
>
>  Hi Karl,
>
> You can for instance run a 'show channels' in the CLI, find out the two
> uuids related to both legs of your call and check the codec used for each
> of them, if it's the same then there's no transcoding (assuming ptime is
> identical on both sides as well).
> I'm pretty sure there must be a better way to do it, but I disabled
> transcoding on my FS profiles so that's what I firstly thought about.
>
> Florent
>
> 2014-10-21 14:05 GMT+02:00 kthofer <karl-theo_hofer at inteli-sim.com> <karl-theo_hofer at inteli-sim.com>:
>
>
>  Hi There
>
> I am looking for a simple way to see if FS is actual transcoding between
> two channels
> in our usecase FS is setting up 2 outbound calls and after the A-leg has
> answered we set up a second outgoing call when answered we bridge the 2
> legs.
> I can not see if FS is transcoding or not with out doing a siptrace on
> the 2 legs.
>
> --
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:consulting at freeswitch.orghttp://www.freeswitchsolutions.com
>
> Official FreeSWITCH Siteshttp://www.freeswitch.orghttp://confluence.freeswitch.orghttp://www.cluecon.com
>
> FreeSWITCH-powered IP PBX: The CudaTel Communication Server
>
> FreeSWITCH-users mailing listFreeSWITCH-users at lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.freeswitch.org
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:consulting at freeswitch.orghttp://www.freeswitchsolutions.com
>
> Official FreeSWITCH Siteshttp://www.freeswitch.orghttp://confluence.freeswitch.orghttp://www.cluecon.com
>
> FreeSWITCH-powered IP PBX: The CudaTel Communication Server
>
> FreeSWITCH-users mailing listFreeSWITCH-users at lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.freeswitch.org
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:consulting at freeswitch.orghttp://www.freeswitchsolutions.com
>
> Official FreeSWITCH Siteshttp://www.freeswitch.orghttp://confluence.freeswitch.orghttp://www.cluecon.com
>
> FreeSWITCH-powered IP PBX: The CudaTel Communication Server
>
> FreeSWITCH-users mailing listFreeSWITCH-users at lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.freeswitch.org
>
>
>
>  Steven's right.
> I thought about a very basic use case when writing my message.
>
>  Florent
>
> 2014-10-22 10:59 GMT+02:00 Steven Ayre <steveayre at gmail.com>:
>
>> 'if it's the same then there's no transcoding'
>>
>>  Also depending on the applications in use - playback, conference,
>> eavesdrop etc will also require transcoding.
>>
>>
>>
>>  On 21 October 2014 17:52, Florent Krieg <flokrrr at gmail.com> wrote:
>>
>>>  Hi Karl,
>>>
>>> You can for instance run a 'show channels' in the CLI, find out the two
>>> uuids related to both legs of your call and check the codec used for each
>>> of them, if it's the same then there's no transcoding (assuming ptime is
>>> identical on both sides as well).
>>>  I'm pretty sure there must be a better way to do it, but I disabled
>>> transcoding on my FS profiles so that's what I firstly thought about.
>>>
>>>  Florent
>>>
>>> 2014-10-21 14:05 GMT+02:00 kthofer <karl-theo_hofer at inteli-sim.com>:
>>>
>>>> Hi There
>>>>
>>>> I am looking for a simple way to see if FS is actual transcoding between
>>>> two channels
>>>> in our usecase FS is setting up 2 outbound calls and after the A-leg has
>>>> answered we set up a second outgoing call when answered we bridge the 2
>>>> legs.
>>>> I can not see if FS is transcoding or not with out doing a siptrace on
>>>> the 2 legs.
>>>>
>>>> --
>>>>
>>>>
>>>>
>>>> _________________________________________________________________________
>>>> Professional FreeSWITCH Consulting Services:
>>>> consulting at freeswitch.org
>>>> http://www.freeswitchsolutions.com
>>>>
>>>> Official FreeSWITCH Sites
>>>> http://www.freeswitch.org
>>>> http://confluence.freeswitch.org
>>>> http://www.cluecon.com
>>>>
>>>> 
>>>> 
>>>>
>>>> FreeSWITCH-users mailing list
>>>> FreeSWITCH-users at lists.freeswitch.org
>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>> UNSUBSCRIBE:
>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>> http://www.freeswitch.org
>>>>
>>>
>>>
>>> _________________________________________________________________________
>>> Professional FreeSWITCH Consulting Services:
>>> consulting at freeswitch.org
>>> http://www.freeswitchsolutions.com
>>>
>>> Official FreeSWITCH Sites
>>> http://www.freeswitch.org
>>> http://confluence.freeswitch.org
>>> http://www.cluecon.com
>>>
>>> 
>>> 
>>>
>>> FreeSWITCH-users mailing list
>>> FreeSWITCH-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> http://www.freeswitch.org
>>>
>>
>>
>> _________________________________________________________________________
>> Professional FreeSWITCH Consulting Services:
>> consulting at freeswitch.org
>> http://www.freeswitchsolutions.com
>>
>> Official FreeSWITCH Sites
>> http://www.freeswitch.org
>> http://confluence.freeswitch.org
>> http://www.cluecon.com
>>
>> 
>> 
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services: consulting at freeswitch.orghttp://www.freeswitchsolutions.com
>
> Official FreeSWITCH Siteshttp://www.freeswitch.orghttp://confluence.freeswitch.orghttp://www.cluecon.com
>
> FreeSWITCH-powered IP PBX: The CudaTel Communication Server
>
> FreeSWITCH-users mailing listFreeSWITCH-users at lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.freeswitch.org
>
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> 
> 
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20141022/5d2ef0bc/attachment-0001.html 