[Freeswitch-users] How to see if Freeswitch is transcodin

kthofer karl-theo_hofer at inteli-sim.com
Wed Oct 22 14:00:33 MSD 2014


Hi Steven, Florent
ok but I have some 100 channels on the box simultaneously
that will be very difficult to make out the uuids needed as well the 
printout are in one line is there a possibility to show the result in a  
table or something more reader friendly?


With best regards

Karl Theo Hofer

Florent Krieg skrev 2014-10-22 11:34:
> Steven's right.
> I thought about a very basic use case when writing my message.
>
> Florent
>
> 2014-10-22 10:59 GMT+02:00 Steven Ayre <steveayre at gmail.com>:
>
>> 'if it's the same then there's no transcoding'
>>
>> Also depending on the applications in use - playback, conference,
>> eavesdrop etc will also require transcoding.
>>
>>
>>
>> On 21 October 2014 17:52, Florent Krieg <flokrrr at gmail.com> wrote:
>>
>>> Hi Karl,
>>>
>>> You can for instance run a 'show channels' in the CLI, find out the two
>>> uuids related to both legs of your call and check the codec used for each
>>> of them, if it's the same then there's no transcoding (assuming ptime is
>>> identical on both sides as well).
>>> I'm pretty sure there must be a better way to do it, but I disabled
>>> transcoding on my FS profiles so that's what I firstly thought about.
>>>
>>> Florent
>>>
>>> 2014-10-21 14:05 GMT+02:00 kthofer <karl-theo_hofer at inteli-sim.com>:
>>>
>>>> Hi There
>>>>
>>>> I am looking for a simple way to see if FS is actual transcoding between
>>>> two channels
>>>> in our usecase FS is setting up 2 outbound calls and after the A-leg has
>>>> answered we set up a second outgoing call when answered we bridge the 2
>>>> legs.
>>>> I can not see if FS is transcoding or not with out doing a siptrace on
>>>> the 2 legs.
>>>>
>>>> --
>>>>
>>>>
>>>> _________________________________________________________________________
>>>> Professional FreeSWITCH Consulting Services:
>>>> consulting at freeswitch.org
>>>> http://www.freeswitchsolutions.com
>>>>
>>>> Official FreeSWITCH Sites
>>>> http://www.freeswitch.org
>>>> http://confluence.freeswitch.org
>>>> http://www.cluecon.com
>>>>
>>>> 
>>>> 
>>>>
>>>> FreeSWITCH-users mailing list
>>>> FreeSWITCH-users at lists.freeswitch.org
>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>> http://www.freeswitch.org
>>>>
>>>
>>> _________________________________________________________________________
>>> Professional FreeSWITCH Consulting Services:
>>> consulting at freeswitch.org
>>> http://www.freeswitchsolutions.com
>>>
>>> Official FreeSWITCH Sites
>>> http://www.freeswitch.org
>>> http://confluence.freeswitch.org
>>> http://www.cluecon.com
>>>
>>> 
>>> 
>>>
>>> FreeSWITCH-users mailing list
>>> FreeSWITCH-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> http://www.freeswitch.org
>>>
>>
>> _________________________________________________________________________
>> Professional FreeSWITCH Consulting Services:
>> consulting at freeswitch.org
>> http://www.freeswitchsolutions.com
>>
>> Official FreeSWITCH Sites
>> http://www.freeswitch.org
>> http://confluence.freeswitch.org
>> http://www.cluecon.com
>>
>> 
>> 
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>>
>>
>> Steven's right.
>> I thought about a very basic use case when writing my message.
>>
>> Florent
>>
>> 2014-10-22 10:59 GMT+02:00 Steven Ayre <steveayre at gmail.com 
>> <mailto:steveayre at gmail.com>>:
>>
>>     'if it's the same then there's no transcoding'
>>
>>     Also depending on the applications in use - playback, conference,
>>     eavesdrop etc will also require transcoding.
>>
>>
>>
>>     On 21 October 2014 17:52, Florent Krieg <flokrrr at gmail.com
>>     <mailto:flokrrr at gmail.com>> wrote:
>>
>>         Hi Karl,
>>
>>         You can for instance run a 'show channels' in the CLI, find
>>         out the two uuids related to both legs of your call and check
>>         the codec used for each of them, if it's the same then
>>         there's no transcoding (assuming ptime is identical on both
>>         sides as well).
>>         I'm pretty sure there must be a better way to do it, but I
>>         disabled transcoding on my FS profiles so that's what I
>>         firstly thought about.
>>
>>         Florent
>>
>>         2014-10-21 14:05 GMT+02:00 kthofer
>>         <karl-theo_hofer at inteli-sim.com
>>         <mailto:karl-theo_hofer at inteli-sim.com>>:
>>
>>             Hi There
>>
>>             I am looking for a simple way to see if FS is actual
>>             transcoding between
>>             two channels
>>             in our usecase FS is setting up 2 outbound calls and
>>             after the A-leg has
>>             answered we set up a second outgoing call when answered
>>             we bridge the 2
>>             legs.
>>             I can not see if FS is transcoding or not with out doing
>>             a siptrace on
>>             the 2 legs.
>>
>>             --
>>
>>
>>             _________________________________________________________________________
>>             Professional FreeSWITCH Consulting Services:
>>             consulting at freeswitch.org <mailto:consulting at freeswitch.org>
>>             http://www.freeswitchsolutions.com
>>
>>             Official FreeSWITCH Sites
>>             http://www.freeswitch.org
>>             http://confluence.freeswitch.org
>>             http://www.cluecon.com
>>
>>             
>>             
>>
>>             FreeSWITCH-users mailing list
>>             FreeSWITCH-users at lists.freeswitch.org
>>             <mailto:FreeSWITCH-users at lists.freeswitch.org>
>>             http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>             UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>             http://www.freeswitch.org
>>
>>
>>
>>         _________________________________________________________________________
>>         Professional FreeSWITCH Consulting Services:
>>         consulting at freeswitch.org <mailto:consulting at freeswitch.org>
>>         http://www.freeswitchsolutions.com
>>
>>         Official FreeSWITCH Sites
>>         http://www.freeswitch.org
>>         http://confluence.freeswitch.org
>>         http://www.cluecon.com
>>
>>         
>>         
>>
>>         FreeSWITCH-users mailing list
>>         FreeSWITCH-users at lists.freeswitch.org
>>         <mailto:FreeSWITCH-users at lists.freeswitch.org>
>>         http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>         UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>         http://www.freeswitch.org
>>
>>
>>
>>     _________________________________________________________________________
>>     Professional FreeSWITCH Consulting Services:
>>     consulting at freeswitch.org <mailto:consulting at freeswitch.org>
>>     http://www.freeswitchsolutions.com
>>
>>     Official FreeSWITCH Sites
>>     http://www.freeswitch.org
>>     http://confluence.freeswitch.org
>>     http://www.cluecon.com
>>
>>     
>>     
>>
>>     FreeSWITCH-users mailing list
>>     FreeSWITCH-users at lists.freeswitch.org
>>     <mailto:FreeSWITCH-users at lists.freeswitch.org>
>>     http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>     UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>     http://www.freeswitch.org
>>
>>
>>
>>
>> _________________________________________________________________________
>> Professional FreeSWITCH Consulting Services:
>> consulting at freeswitch.org
>> http://www.freeswitchsolutions.com
>>
>> Official FreeSWITCH Sites
>> http://www.freeswitch.org
>> http://confluence.freeswitch.org
>> http://www.cluecon.com
>>
>> 
>> 
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20141022/f8b5012c/attachment-0001.html 


Join us at ClueCon 2016 Aug 8-12, 2016
More information about the FreeSWITCH-users mailing list