[Freeswitch-users] Sangoma + Atcom Card on the same machine

[Anita Hall]

One additional complexity is that the Atcom card needs an additional module
in Dahdi :( Does that mean, I would have to install and maintain 2
different Dahdi ?

I know this is a somewhat contrived problem. Hope it teaches me something :)

regards,
Anita



On Mon, Feb 27, 2012 at 5:00 PM, Anita Hall <anita.hall at simmortel.com>wrote:

> Hi
>
> I am trying to configure Sangoma A104d + Atcom Card  (4-port E1) on the
> same machine. Is it even possible using FreeTDM ?
>
> $lspci
> 01:06.0 Network controller: Sangoma Technologies Corp. A104d QUAD T1/E1
> AFT card
> 01:07.0 Bridge: PLX Technology, Inc. Device 4002 (rev 01)
>
> For Sangoma card, I want to use the more stable libsng_isdn from Sangoma,
> while for Atcom card I will have to use libpri.
>
> Or may be, I should use libpri for both ?
>
> regards,
> Anita
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20120227/779f23ed/attachment.html