[Freeswitch-users] Share PRI line?

[fssupport at highergear.com]

> On Wed, Sep 21, 2011 at 6:20 PM,  <fssupport at highergear.com> wrote:
>> We have a client with a Mitel PBX with a PRI connected to it.  We are
>> deploying a freeswitch box that will do some autodialing tasks for them.
>> Is there a way to share the PRI between the two systems?  If nothing
>> else,
>> I'm pretty sure I can put a two line interface card in the Freeswitch
>> server, plug the pri into it, then connected the other interface to the
>> Mitel box, but that would make our box a point of failure and I'd like
>> to
>> avoid that if possible.
>>
>
> It is not possible to "split" or "share" a PRI interface with passive
> components, your three options are
>
> a/ put a second PRI interface onto "your" system, and configure it to
> route inbound calls to the Mitel system and outbound calls from the
> Mitel system
> b/ put a second PRI interface onto the Mitel, and configure it as per
> a/ but with your system instead
> c/ purchase a device with 3 PRI interfaces that can route inbound
> calls and outbound calls appropriately as per a/ and b/
>
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
Thanks for your response on this.  With regards to option c, I found this:
http://www.patapsco.co.uk/Products/Liberator/ISDN_Splitter_ISDN-Converter_Liberator_s.html
I think this might be what I need?